Bauknecht KGIN 3183 mode d'emploi

Bauknecht KGIN 3183
7.5 · 1
PDF mode d'emploi
 · 1 page
Anglais
mode d'emploiBauknecht KGIN 3183
EN
Refrigerator Compartment
A. Fan and antibacterial and antiodour filter
(depending on the model)
B. Lamp or LED light (depending on the model)
C. Shelves
D. LED lights (depending on the model)
E. Crisper drawer cover
F. Crisper(s)
G. Rating plate (located at side of crisper)
H. Control panel
N. Dairy compartment
O. Door trays
P. Bottle holder (if provided)
Q. Bottle bin
Least cold zone
Intermediate zone
Coldest zone
Fruit and vegetable zone
Freezer Compartment
I. Top drawer (freezing area)
L. Middle and bottom drawers (storage area for
frozen and deep frozen food)
M. Ice cube tray (if provided)
Note: All shelves, door trays and racks are
removable.
The ideal temperatures for preserving foods are
already factory-set.
Carefully read the user handbook provided
before using the appliance.
The characteristics, technical data and images
may vary according to the model.
Eco night function
The Eco night function enables the appliance’s energy consumption to be concentrated in the hours that correspond to the cheapest electricity tariff (generally at night), when electricity is freely
available and costs less compared to daytime (only in countries that utilize a multi-tariff system based on time of day - check your energy tariff with your local electricity utility company). To
activate the function, press the button
at the time the cheap tariff begins (depending on your specific tariff). For example, if the cheap rate begins at 8 pm, press the button at that time. When
the Eco night LED is ON, the function is active. Once the function has been activated, the appliance automatically adapts energy consumption based on the time selected, i.e. consuming less
energy during the day than at night.
IMPORTANT: To operate properly, the function must be active during both night and day. The function remains active until deactivated (or it deactivates in the event of a blackout or appliance
switch-off). To deactivate the function, press the button again. When the Eco night LED is OFF, the function is not active.
Note: the appliance’s declared energy consumption refers to operation with the Eco night function deactivated.

5019 400 00950

QUICK GUIDE

What to do if... Possible causes Cures
The control panel is switched off, the appliance does not work.
The appliance could be in On/Standby mode.
There may be an appliance power supply problem.
Activate the appliance with the On/Standby button
Make sure:
- there is not a power outage
- the plug is properly inserted in the power socket and the mains double-pole switch (if present) is in the correct position
(i.e. allows the appliance to be powered)
- the household electrical system protection devices are efficient
- the power cable is not broken.
The inside light does not work.
The light may need replacing.
The appliance could be in On/Standby mode
Models with lamp: disconnect the appliance from the power supply, check the lamp and, if necessary, replace it with a
new one (see the section “Lamp or LED replacement”).
Models with LED lights: contact the authorised Service Centre.
Activate the appliance with the On/Standby button
The temperature inside the compartments is not low enough. There could be various causes (see “Cures”)
Make sure:
- the doors close properly
- the appliance is not installed near a heat source
- the set temperature is adequate
- the circulation of air through the vents at the bottom of the appliance is not obstructed
There is water on the bottom of the refrigerator compartment. The defrost water drain is blocked. Clean the defrost water drain hole (see the section “Appliance Maintenance and Cleaning”)
The front edge of the appliance, at the door striker seal, is hot. This is not a defect. It prevents condensation from forming. No cure is necessary.
The red light
flashes and an acoustic signal sounds
Door open alarm
It is activated when a door remains open for a long period of time.
Close the doors of the product to deactivate the acoustic signal. If the acoustic signal does not go off, it is a power failure
alarm (see the section Power failure alarm).
The red light flashes and an acoustic signal sounds and remains on even with the
door closed.
Power failure alarm
It is activated in case of a prolonged power outage causing an increase in the freezer
compartment temperature.
Note: A different product temperature cannot be set until the power failure alarm is deactivated.
Before deactivating the acoustic signal, it is advisable to pay attention to the temperature shown on the temperature
display, corresponding to the highest temperature reached in the freezer compartment during the power failure. Press
the “Stop Alarm” button briefly to deactivate the acoustic signal. After pressing the button, the temperature display
shows the set temperatures again. If the freezer compartment has not yet reached the optimum food preservation
temperature, the freezer compartment temperature alarm could be activated (see freezer compartment temperature
alarm). Check the food before consuming it.
The red light
comes on (without flashing), an acoustic signal sounds and the
freezer compartment temperature display flashes.
Freezer compartment temperature alarm
The freezer compartment temperature alarm indicates that the compartment temperature is not
optimum. This may happen: with first use, after defrosting and/or cleaning, if large amounts of
food are placed inside the freezer or when the freezer door has not been closed properly.
Press the “Stop Alarm” button briefly to deactivate the acoustic signal. The red light goes off automatically when
optimum temperature conditions are reached. If the freezer compartment temperature alarm stays on, contact the
Authorised Service Centre.
The red light
comes on, an acoustic signal sounds and the letter “F” flashes on
the display.
Malfunction alarm
The alarm indicates a fault in a technical component.
Call the authorised Service Centre. Press the “Stop Alarm” button briefly to deactivate the acoustic signal
UAROBGRUHUSKCZPLFIDKNOSEGRITPTESNLFRGBDE
Fan
The fan is preset as ACTIVE. The fan can be deactivated by pressing the button on the base (as shown in the figure). If the room temperature exceeds 27°C or if there are water droplets on the glass shelves, the fan must be on in order to ensure the correct preservation of food. Deactivation of the fan enables energy consumption to be optimised.
Printed in Italy 05/12 - Bauknecht
®
Registered trademark/TM Trademark of Whirlpool group of companies - © Copyright Whirlpool Europe s.r.l. 2014. All rights reserved - http://www.bauknecht.eu
Freezer compartment temperatureA different temperature can be set using the “Freezer” button.Fast FreezePress the “Freezer” button for 3 seconds 24 hours before placing large amounts of food in the freezer compartment. When the function is activated, the icon lights up. This function is automatically deactivated after 48 hours, or manually by pressing the “Freezer” button again.Note: The food to be frozen must not be touching already frozen food.Key Lock The key lock can be activated/deactivated by keeping the “key lock” button pressed for 3 seconds, until a confirmation sound is heard (the icon lights up). If you press any button while the key lock is active, you will hear a sound and the “Key Lock” icon will start to flash.ProFresh function This function is used to quickly reach optimum preservation conditions regarding temperature and humidity inside the appliance. The fan must also be on for it to work properly.Temperature displayThe display can alternately show the refrigerator compartment temperature (between 2°C and 8°C) or the freezer compartment temperature (between -16°C and -24°C).Refrigerator compartment temperatureA different temperature can be set using the “Fridge” button.Deactivating acoustic alarms (Stop Alarm) To deactivate the acoustic signals, press the “Stop Alarm” button briefly.On/Standby Press for 3 seconds to switch off the appliance. In Standby mode, the two hyphens and the light in the refrigerator compartment come on. To switch the product back on, simply press the button briefly again.Note: This operation does not disconnect the appliance from the power supply.

Consultez gratuitement le manuel de la marque Bauknecht KGIN 3183 ici. Ce manuel appartient à la catégorie Réfrigérateurs et a été évalué par 1 personnes avec une moyenne de 7.5. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le KGIN 3183 de la marque Bauknecht ou avez-vous besoin d’aide? Posez votre question ici

Besoin d’aide?

Vous avez une question sur le Bauknecht et la réponse n'est pas dans le manuel? Posez votre question ici. Fournissez une description claire et complète du problème, et de votre question. Plus votre problème et votre question sont clairement énoncés, plus les autres propriétaires de Bauknecht ont de chances de vous fournir une bonne réponse.

Nombre de questions : 0

Généralités
Bauknecht
KGIN 3183 | KGIN 3183
réfrigérateur
4011577107616
Anglais
Mode d’emploi (PDF)

Vous ne trouvez pas la réponse à votre question dans le manuel? Vous trouverez peut-être la réponse à votre question dans la FAQ sur le Bauknecht KGIN 3183 au dessous de.

Votre question n'est pas dans la liste ? Posez votre question ici

Aucun résultat