Binatone Icarus 2020

Binatone Icarus 2020 mode d'emploi

(1)
  • THIS EQUIPMENT IS NOT DESIGNED FOR MAKING
    EMERGENCY TELEPHONE CALLS WHEN THE POWER
    FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE
    MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
    Before operating this set,
    please read these instructions carefully.
    USER GUIDE
    Digital Cordless Telephone
    CLEANING AND CARE
    Do not clean any part of your Icarus 2020 system with benzene, thinner or
    other solvent chemicals this
    may cause permanent damage which is not
    covered by the Guarantee.
    When necessary, clean it with a damp cloth.
    Keep your hot, humid conditions
    or strong
    sunlight,and don't let it get wet.
    Every effort has been made to ensure high standards of reliability for your
    However, if something
    does go wrong, please
    try to repair it yourself
    consult your supplier or the Helpline.
    do not
    Icarus 2020 system away from
    Icarus 2020 system
    GUARANTEE AND SERVICE
    The
    purchase shown on your sales receipt. This guarantee
    does not cover any
    faults or defects caused by accidents,misuse, fair wear and tear, neglect,
    faults on the telephone line, lightning, tampering with the equipment, or any
    attempt at adjustment or repair other than through approved agents.
    Please keep your sales (till) receipt this is your guarantee.
    You should also keep the original packaging material.
    In the unlikely event that you need to return your
    Repair Centre while it is under guarantee, there will be a 5 handling charge.
    £
    While the unit is under Guarantee
    1. Disconnect the base unit from the telephone line and the mains electricity
    supply.
    2. Pack up all parts of your
    3. Return the unit to the shop where you bought it, making sure you take your
    sales receipt.
    After the Guarantee has expired
    Remember to include the mains adapter.
    3. Call Helpline on 0845 345 9677 (for UK only) and ask for a quotation of the
    repair charge and details of where to send your I rus 2020 system for repair.
    4. Make sure you include with your
    5 Return your
    If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair
    under Guarantee. Then...
    ¾ Your name and address
    ¾ A cheque or postal order for the value of the repair
    * This does not affect your statutory rights.
    Department.
    Icarus 2020 system is guaranteed for 12 months from the date of
    Icarus 2020 system to our
    Icarus 2020 system.
    Icarus 2020 system to the address given by the Service
    Icarus 2020 system , using the original packaging.
    TABLE OF CONTENTS
    1
    IMPORTANT SAFETY INSTRUCTIONS
    ........................................................... 4
    2
    INSTALLING YOUR PHONE
    ............................................................................ 5
    2.1 CONNECTING THE BASE STATION .......................................................................... 5
    2.2 INSTALLING AND CHARGING THE BATTERIES...................................................... 5
    3
    GETTING TO KNOW YOUR PHONE
    ................................................................ 6
    3.1 HANDSET OVERVIEW ................................................................................................ 6
    3.2 BASE STATION ...
    3. DISPLAY ICONS AND SYMBOLS............................................................................... 8
    3. M
    ENU STRUCTURE ....................................................................................................
    3. T
    EXT AND DIGIT ENTRY TABLE................................................................................ 9
    3.5.1
    HARACTER SET ......................................................................................... 10
    4
    USING YOUR PHONE
    ......................................................................................1
    4.1 MAKE A CALL ............................................................................................................. 1
    4.1.1 PREPARATORY DIALING .........................................................................................1
    4.1.2 DIRECT DIALING ....................................................................................................... 1
    4.1.3 CALL FROM THE PHONEBOOK ............................................................................... 1 1
    4.1.4 CALL FROM THE CALL LIST..................................................................................... 1
    4.1.5 CALL FROM THE REDIAL LIST(ONLY AVAILABLE WITH CALLER DISPLAY) ...... 1
    4.1.6
    CALL TIMER .............................................................................................................. 1
    4.2
    ANSWER A CALL ....................................................................................................... 1
    4.3
    END A CALL ................................................................................................................ 1
    4.4
    ADJUST EARPIECE VOLUME .................................................................................... 1
    4.5 MUTE A CALL .............................................................................................................1
    4.6 SET THE SILENT MODE .............................................................................................1
    4.7 TURN ON THE KEYPAD LOCK...................................................................................1
    4.8
    REDIAL THE LAST NUMBER .....................................................................................1
    4.8.1 REDIAL A NUMBER FROM THE REDIAL LIST.........................................................1
    4.8.2 STORE A REDIAL NUMBER INTO THE PHONEBOOK............................................1
    4.8.3
    DELETE A REDIAL NUMBER ....................................................................................1
    4.8.4 DELETE THE ENTIRE REDIAL LIST .........................................................................1
    4.9
    HANDSET................................................................................................... 1
    4.10 MAKE AN INTERNAL CALL (FOR MULTI-HANDSET VERSIONS ONLY ) ................ . 1
    4.10.1
    INTERCOM ANOTHER HANDSET ..........................................................................1
    4.10.2
    CALL ALL HANDSETS ............................................................................................. 1
    4.10.3
    TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET ................................1
    4.10.4 MAKE A 3-WAY CONFERENCE CALL ....................................................................1
    5
    PRIVATE PHONEBOOK..................................................................................1
    5.3 VIEW A PHONEBOOK ENTRY ..................................................................................17
    5.4 EDIT A PHONEBOOK ENTRY ................................................................................... 17
    5.5
    DELETE A PHONEBOOK ENTRY ............................................................................. 17
    5.6 DELETE THE ENTIRE PRIVATE PHONEBOOK ....................................................... 17
    5.7
    CHECK THE PHONEBOOK USAGE .........................................................................17
    6
    CALLER DISPLAY (NETWORK DEPENDENT)
    ..............................................1
    6.1 VIEW THE CALL LIST ................................................................................................ 18
    6.2
    STORE A CALL LIST NUMBER INTO THE PHONEBOOK....................................... 18
    6.3
    DELETE AN ENTRY IN THE CALL LIST ................................................................... 19
    6.4 DELETE THE ENTIRE LIST OF THE CALL LIST ...................................................... 19
    6.5
    VIEW THE DETAILS OF THE CALL LIST ENTRY ....................................................19
    7
    PHONE SETTINGS
    ..........................................................................................19
    7.1
    DATE AND TIME SETTINGS ..................................................................................... 19
    7.1.1
    CHANGE THE DATE FORMAT ................................................................................19
    7.1.2 CHANGE THE TIME FORMAT ................................................................................. 19
    7.1.3
    SET THE TIME.......................................................................................................... 19
    7.1.4
    SET THE DATE ......................................................................................................... 20
    7.2
    ALARM SETTINGS.....................................................................................................
    7.2.1
    TURN ON/OFF THE ALARM .................................................................................... 20
    7.2.2 SET THE ALARM TIME ............................................................................................ 21
    7.3
    HANDSET SETTINGS ................................................................................................
    7.3.1
    SET THE RINGER RINGTONE FOR INTERNAL CALLS ........................................
    7.3.2 SET THE RINGER MELODY FOR EXTERNAL CALLS ...........................................
    7.3.3 SET THE RINGER VOLUME ....................................................................................
    7.3.4 SET ALERT TONES..................................................................................................
    7.3.5 SET THE HANDSET LANGUAGE ............................................................................
    7.3.6 RENAME THE HANDSET .........................................................................................
    7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE ..................................
    7.3.8 SET THE AUTO ANSWER .......................................................................................
    7.4 BASE SETTINGS ....................................................................................................... 22
    5.1 ADD A NEW PHONEBOOK ENTRY .......................................................................... 15
    5.2 SEARCH A PHONEBOOK ENTRY............................................................................. 15
    8
    ANSWERING MACHINE
    ................................................................................ 25
    7
    21
    22
    22
    3
    4
    5
    1
    8.1 TURN ON/OFF THE ANSWERING MACHINE .......................................................... 25
    8.2 LISTEN TO THE MESSAGES IN THE ANSWERING MACHINE ............................. 26
    8.3
    DELETE ALL MESSAGES IN THE ANSWERING MACHINE ...................................27
    8.4
    RECORD MEMO ........................................................................................................ 27
    8.5
    ANSWERING MACHINE SETTINGS ......................................................................... 2
    8.5.1
    SET THE ANSWER MODE ...................................................................................... 28
    8.5.2
    SET THE OUTGOING MESSAGE (OGM) LANGUAGE (COUNTRY DEPENDENT)
    ................................................................................................................................. 28
    8.5.3
    RECORD YOUR OWN OUTGOING MESSAGE (OGM) ......................................... 28
    8.5.4
    PLAYBACK AND DELETE THE OUTGOING MESSAGE (OGM) ........................... 30
    8.5.5
    SET THE ANSWER DELAY ..................................................................................... 30
    8.5.6 SET THE RECORDING TIME OF INCOMING MESSAGE ......................................
    8.5.7
    ..................................................................................................
    8.5.8 CHANGE THE COMPRESSION RATE .................................................................... 31
    8.5.9 ACTIVATE REMOTE ACCESS ................................................................................ 31
    TROUBLESHOOTING
    ..................................................................................3
    DECLARATION OF CONFORMITY
    . ............................................................ 3
    CALL SCREENING
    9
    3.5.
    3.5.
    2 PHLISH CHARACTER SET......................................................................................
    3
    10
    NORWEGIAN CHARACTER SET............................................................................ 10
    3.5. 11 4 GREEK CHARACTER SET .....................................................................................
    1
    1
    1
    1
    2
    2
    2
    2
    3
    3
    3
    4
    4
    4
    5
    20
    21
    2
    21
    21
    22
    22
    31
    LATIN C
    7.4. D
    E-REGISTER A HANDSET .................................................................................... 23
    7.4. C
    HANGE THE DIAL MODE ......................................................................................
    7.4. C
    HANGE THE FLASH (RECALL)TIME ....................................................................
    7.4. CHANGE THE SYSTEM PIN CODE ........................................................................ 24
    7.5
    REGISTRATION ......................................................................................................... 24
    7.6
    RESET YOUR PHONE ............................................................................................... 25
    23
    23
    10
    FIND THE
    1 IMPORTANT SAFETY INSTRUCTIONS
    When using your telephone equipment, basic safety precautions should always
    be followed to reduce the risk of fire, electric shock and injury, including the
    1) Read and understand all the instructions.
    2) Follow all warnings and instructions marked on the product.
    3) Unplug this product from the wall outlet before cleaning. Do not use liquid
    cleaners or aerosol cleaners. Use a damp cloth for cleaning.
    4) Do not use this product near water (for example, near a bath tub, kitchen
    sink, swimming pool).
    5) Do not overload wall outlets and extension cords as this can result in the risk
    of fire or electric shock.
    6) Unplug this product from the wall outlet and refer servicing to our Repair
    When the power supply cord or plug is damaged or frayed.
    If the product does not operate normally by following the operating instructions.
    If the product has been dropped and the cabinet has been damaged.
    If the product exhibits a distinct change in performance.
    7) Unless it is an emergency, avoid using the telephone during an electrical
    storm.There may be a remote risk of electric shock from lightning.
    8) Do not use the telephone to report a gas leak in the vicinity of the leak.
    9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation
    periods for the handsets are only applicable with the default battery capacities
    10) The use of other battery types or non-rechargeable batteries/primary cells
    can be dangerous. These may cause interference and/or damage to the unit
    or surroundings. The manufacturer will not be held liable for damage arising
    from such non-compliance.
    11) Do not use third party charging bays. Damage may be caused to the batteries.
    12) Please ensure the batteries are inserted in the correct polarity.
    13) Dispose of batteries safely. Do not immerse them in water, burn them, or put
    Package contents
    The package contains the following items:
    Single
    • 1 Handset
    • 1 Base station
    • 1 Mains power adapter
    • 1 Telephone line cord
    • 2 rechargeable batteries
    • 1 User manual
    Twin
    • 2 Handsets
    • 1 Base station
    • 1 Mains power adapter
    • 1 Telephone line cord
    • 4 rechargeable batteries
    • 1 User manual
    • 1 Charger pod with a connected
    mains power adapter
    them
    where they could get
    punctured.
    Centre under the
    following conditions:
    following:
    3.2 Base Station with Telephone Answering Machine (TAM) Control
    1. PAGE
    Press the Page on the base station to page your
    2. CHARGING
    CRADLE
    3. CHARGING LED
    Steadily on while the handset is charging.
    4. TAM ON/OFF
    Press to turn on the answering machine.
    Press again to turn off the answering machine.
    5. PLAY/STOP
    Press to play the message
    Press to stop the message playback
    SKIP BACKWARD
    Press to repeat playing the current message from the beginning.
    Press twice to skip
    SKIP FORWARD
    Press to skip the current message and play the next message
    VOLUME UP (+)
    Increase (+) speaker volume during message playback
    VOLUME DOWN (-)
    Decrease (-) speaker volume during message playback
    10. DELETE
    Press once to delete the message during playback
    Press and hold to delete all the messages
    Note: New voice messages will not be deleted.
    handset. It will ring for approximately
    60
    11.
    7-SEG LED DISPLAY
    - - When answering machine is OFF
    00 Steadily ON: No voice messages in TAM
    XX Flash: There are XX new voice messages received where XX is
    from 01 to 59
    Steadily ON: Playing the current XX incoming message
    XX/FF Flashing XX alternatively with FF: There are XX new voice
    messages received where XX is from 01 to 59 and the TAM
    memory is full
    Flashing FF only: TAM is full and only old voice messages are kept
    in
    the TAM memory
    - - /XX Flashing XX alternatively with - -: Time is not set and there are XX
    new voice messages received where XX is from 01 to 59
    Flashing – only: Time is not set and there are only old voice
    messages in the TAM memory.
    YY Steadily ON: There are YY old voice messages (no new voice
    messages).
    A1/A2 Steadily ON: Playing the current outgoing message (OGM) where
    A1,A2 are the OGM of Answer & Record and Answer Only mode
    respectively.
    XX/An Flashing XX alternatively with An: XX incoming message is now
    recording.
    LA Flashing: Remote access is in progress
    LX Steadily ON: Indicate the current volume level where X is from 1 to 8
    3.3 Display Icons and Symbols
    The LCD display gives you information on the current status of the telephone.
    Scroll up / down the menu items / Phonebook list / Redial list / Call List
    Steady when the handset is in range of the base. Flashes when out of
    Steady when an intercom call is in progress.
    Flashes when there is an incoming internal call.
    Indicates a call is in progress on that handset.
    Indicates when the telephone answering machine (TAM ) is turned on.
    Flashes when new TAM messages are received or the TAM messages
    Indicates that the ringer is switched off.
    Steady when an alarm is set. Flashes when the alarm is sounding.
    Indicates that the keypad is locked.
    Indicates when you have a new Voice Mail message.
    (This is a Caller Display service and is not usually available from
    range of the base or not registered to the base.
    UK network providers.)
    are full.
    Indicates when the battery is fully charged.
    Whole icon flashes when the battery performs charging.
    Internal block icon flashes when the battery is in final charging stage.
    Indicates when the battery needs charging.
    Flashes when low battery power level is detected.
    (BACK)
    (INT)
    Indicates when there are more characters or numbers in front of those
    Indicates when there are more characters or numbers after those being
    Press the MENU/OK key to access the main menu.
    Press the MENU/OK key to confirm the current selection.
    Indicates new TAM message / new call in TAM message list / call list.
    Press the C/MUTE key to start an intercom call.
    Press the C/MUTE key to go back to the previous menu level or cancel
    Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute
    being
    displayed.
    displayed.
    the current action.
    the microphone during a call.
    3.4 Menu Structure
    In idle mode, press <MENU/OK> to access the Call List menu. Refer to the
    following for the menu structure.
    <UP/DOWN>
    Main
    Menu
    CALL LIST
    PHONEBOOK
    BS
    SETTINGS
    HS
    SETTIN
    GS
    REGISTRATION
    DEFAULT
    ANS. MACHINE
    Sub
    menu
    Review Call
    List Under
    a selected
    Call List
    entry:
    ADD TO PB
    DELETE
    DELETE ALL
    DETAILS
    Review
    phonebook
    listUnder a
    phonebook
    entry:
    ADD
    VIEW
    EDIT
    DELETE
    DELETE ALL
    PB STATUS
    BS RINGER
    RING VOLUME
    DELETE HS
    DIAL MODE
    FLASH TIME
    CHANGE PIN
    ALARM
    RING SETUP
    TONE SETUP
    LANGUAGE
    RENAME HS
    HS DISPLAY
    AUTO ANSWER
    DATE & TIME
    PIN? - - - -
    MSG PLAYBACK
    DELETE ALL
    MEMO
    TAM ON/OFF
    TAM SETTINGS
    ANSWER MOD
    E
    TAM LANGUA
    GE
    OGM SETTING
    S
    ANSWER DEL
    AY
    RECORD TIME
    REMOTE ACC
    COMPRESSION
    SCREENING
    CHANGE
    PIN
    PIN? - - - -
    Key Press
    <MENU>
    <UP/
    DOWN>
    <UP/
    DOWN>
    <UP/
    DOWN>
    <UP/
    DOWN>
    <UP/
    DOWN>
    <UP/
    DOWN>
    3.5 Text and Digit Entry Table
    The following table shows you where each letter and punctuation character can
    be found, by using repeated presses of the alphanumeric keypad. This will be
    helpful when storing a name in the
    phonebook and renaming your handset.
    In editing mode, a cursor is displayed to indicate the current text entry position.
    It is positioned at the right of the last character entered.
    Writing Tips:
    1. Once a character is selected, the cursor will move to the next position after a
    short pause.
    2. You can move the cursor within the text with the <UP/DOWN> keys to
    amend the text entry.
    3. Press <C> to delete the last character.
    4. Press and hold <C> to delete the entire text string.
    3.5.1 Latin Character Set
    Key
    Press
    1st 2
    nd
    3rd 4th 5th 6th 7th 8th 9th 10th
    1 space - 1 1
    2 A B C 2 2
    3
    D E F 3 3
    4 G H I 4 4
    5 J K L 5 5
    6 M N O 6 6
    7 P Q R S 7 7
    8 T U V 8 8
    9 W X Y Z 9 9
    0 0 0, or P (Pause) if press and hold
    *
    *
    ? / \
    ( ) *
    # #
    ,
    -
    .
    #
    Alphanumeric Editing
    (For phonebook name editing and renaming handset )
    Number Editing (For phone
    number editing,date/time editing)
    3.5.
    Key
    Press
    1st 2
    nd
    3rd 4th 5th 6th 7th 8th 9th 10th
    1 SP - 1 1
    2 A B C 2 2
    3
    D E F 3 3
    4 G H I 4 4
    5 J K L 5 5
    6 M N O 6 6
    7 P Q R S 7 7
    8 T U V 8 8
    9 W X Y Z 9 9
    0 0 0, P (Pause)
    *
    *
    # #
    Alphanumeric Editing
    (For phonebook name editing and renaming handset)
    Number Editing (For phone
    editing, date/time editing)
    Ł
    Key
    Press
    1st 2
    nd
    3rd 4th 5th 6th 7th 8th 9th 10th
    1 SP - 1 1
    2
    3
    D E F 3 3
    4 G H I 4 4
    5 J K L 5 5
    6 M N O 6 6
    7 P Q R S 7 7
    8 T U V 8 8
    9 W X Y Z 9 9
    0 0 0, P (Pause)
    *
    *
    # #
    Alphanumeric Editing
    (For phonebook name editing and renaming handset)
    Number Editing (For phone
    editing, date/time editing)
    Ø
    2
    Polish Character Set
    3.5.3
    Norwegian Character Set
    Key
    Key
    2 A
    Æ B C 2
    Key
    Press
    1st 2
    nd
    3rd 4th 5th 6th 7th 8th 9th 10th
    1 SP - 1 1
    2 A B 2 2
    3
    E 3 3
    4 H I 4 4
    5 K 5 5
    6 6 6
    7 7 7
    8 8 8
    9 9 9
    0 0 0, P (Pause)
    *
    *
    # #
    Alphanumeric Editing
    (For phonebook name editing and renaming handset)
    Number Editing (For phone
    editing, date/time editing)
    Γ
    Δ Ζ
    Θ
    Λ Μ
    Ν Ξ Ο
    Π Ρ Σ
    Τ Υ Φ
    Χ Ψ
    3.5.4
    Greek Character Set
    4 USING YOUR PHONE
    4.1 Make a Call
    4.1.1 Preparatory Dialing
    Enter the phone number and press <TALK ON> / <SPEAKER PHONE> to
    connect to the line and dial the number. When entering the number, if you
    make a mistake, press <C> to delete digits.
    4.1.2 Direct Dialing
    Press <TALK ON> / <SPEAKER PHONE> to connect to the line and then
    4.1.3 Call from the phonebook
    Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to
    Press <TALK ON> / <SPEAKER PHONE> to dial out the selected phonebook entry.
    (Note: if you enter a wrong digit you cannot correct it with the <C> key.)
    Note: You can also access the phonebook by pressing <MENU/OK>, <DOWN>,
    <MENU/OK>.
    select the desired phonebook entry.
    4.1.4 Call from the Call List (only available with Caller Display)
    Press <UP> to access the Call List and press <UP/DOWN> to select the desired
    Press <TALK ON>/ <SPEAKER PHONE> to dial out the selected Call List entry.
    Note: You can also access the Call List by pressing <MENU/OK> twice.
    4.1.5 Call from the redial list
    Press <DOWN> to access the redial list and press <UP/DOWN> to select the
    Note: The alphanumeric keys provide a short-cut to find entries beginning with
    the corresponding letters.
    Call List entry.
    desired redial number.
    Press <TALK ON> / <SPEAKER PHONE> to dial out the selected redial number.
    Note: You can also access the Redial List by pressing the <REDIAL> key.
    enter the phone number.
    4.1.6 Call timer
    Your handset automatically times the duration of every call.
    The call timer is displayed 15 seconds after dialling, and remains on the screen
    for 5 seconds after the end of the call.It is shown in hours, minutes and seconds
    4.2 Answer a Call
    If the handset is not on the charging cradle:
    When the phone rings, press <TALK ON> / <SPEAKER PHONE> to answer a call.
    Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or
    charger will answer the call automatically, and no buttons need to be
    format (HH:MM:SS).
    pressed.
    4.3 End a Call
    During a call press <TALK OFF> to end the call.
    OR
    Put the handset on the base station or charger to end the call.
    4.4 Adjust Volume
    There are 5 levels (VOLUME 1 to VOLUME 5) to choose the earpiece or
    During a call:
    Press <UP/DOWN> to select volume 1-5. The current setting is shown.
    When you end the call, the setting will remain at the last selected level.
    4.5 Mute a Call
    You can talk to someone nearby without letting the caller hear you during a call.
    During a call:
    Press <C> to mute the microphone and “MUTED” will display on the LCD.
    Your caller cannot hear you. Press <C> again to unmute the microphone.
    4.6 Set the Silent Mode
    In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER
    OFF”
    speakerphone volume.
    icon is displayed on the LCD.
    Note: The display will still flash the Call icon and show CALL or the Caller Display
    number, when there is an incoming call, even if the ringer is turned off.
    To turn the ringer back on, press and hold <HASH/#> again.
    4.7 Turn on the Keypad Lock
    In idle, press and hold <STAR/*> to turn on the keypad lock. The “KEYPAD
    4.8 Redial the last number
    You can redial any of the 5 last numbers called. If you have stored a name in
    the phonebook to go with the number, the name will be displayed instead.
    4.8.1 Redial a Number from the Redial List
    1. In idle mode, press <DOWN> to access the redial list.
    Note: If the redial list entry shows a name, press <Hash/#> to view the number
    2. Press <UP/DOWN> to browse the redial list.
    3. Press <TALK ON> / <SPEAKER PHONE> to dial to the selected redial number.
    Note: If there are no numbers in the redial list, the display shows
    EMPTY
    .
    4.8.2 Store a Redial Number into the Phonebook
    1. Follow Steps 1 and 2 in section 4.8.1
    .
    2. Press <MENU> and <UP/DOWN> to select ADD TO PB.
    3. Press <OK> and then enter the name you want to use in the phonebook.
    4. Press <OK> and then modify the number, if necessary.
    5. Press <OK> to show <MELODY 1>.
    6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will
    be played when browsing the ringtone list. (Note: the selected melody will
    7. Press <OK> to confirm, and the entry will be stored.
    Note: You can still use <TALK ON> / <SPEAKER PHONE>to answer a call when
    To turn the keypad lock off, press and hold <STAR/*> again.
    only be played if you subscribe to Caller Display and the incoming number
    icon is displayed on the LCD.
    The most recent last number will display at the top of the redial list.
    of this entry.
    matches the
    stored number.)
    4.8.3 Delete a Redial Number
    1. Follow Steps 1 and 2 in section 4.8.1.
    2. Press <MENU> and <UP/DOWN> to select DELETE.
    3. Press
    <OK> to confirm, and the entry will be deleted.
    4.8.4
    Delete the Entire Redial List
    1. Follow Steps 1 and 2 in section 4.8.1.
    2. Press <MENU> and <UP/DOWN> to select DELETE ALL
    3. Press <OK> to display <CONFIRM?>.
    4. Press <OK> to confirm. All entries will be deleted and the display will show
    <EMPTY>.
    LOCK”
    the handset is ringing.
    4.9 Find the Handset
    You can locate the handset by pressing <PAGE> on the base station. All the
    handsets registered to the base will produce the paging tone and show
    <TALK OFF> /<C> on any handset or <PAGE> on the base again.
    Note: If there is an incoming call during paging, the phone will ring with the
    4.10 Make an Internal Call (For Multi-handset Versions Only)
    This feature is only applicable when there are at least two registered handsets
    .
    It allows you to make internal calls, transfer external calls from one handset to
    incoming call instead of paging.
    "PAGING" on the display. You can stop the paging by pressing <TALKON>/
    another handset and make conference calls. If the called handset is not in
    answered with 60 seconds, the called handset will stop ringing and the calling
    Note: If only one handset is registered to the base station, when <C/MUTE/INT>
    is pressed, it will display NOT POSSIBLE
    4.10.1 Intercom Another Handset
    1. In idle mode, press <C/MUTE/INT>
    and all the other registered handset
    2. Enter the number of the handset that you want to call, or enter "9" to call all
    3. The called handset rings and <TALK ON> / <SPEAKER PHONE> must be
    Note: If only two handsets are registered to the base station, pressing
    <C/MUTE/INT> will call the other handset immediately.
    numbers will display, along with a "9".
    to establish the intercom call.
    4.10.3 Transfer an External Call to another handset
    During an external call:
    1. Press <MENU> and <UP/DOWN> to select INTERCOM
    .
    2. Press <OK> to show all the other registered handset numbers, plus "9".
    3. The external call is put on hold automatically and the called handset rings
    .
    4. Press <TALK ON> / <SPEAKER PHONE> on the called handset to establish
    Enter the number for the handset you
    want to transfer the call to.
    handset will return to
    standby mode.
    handsets.
    5. Press <TALK OFF> on the calling handset or put the calling handset on the
    charging cradle to end the current call with the external party.
    6. The external call is transferred to the called handset.
    4.10.2 Call All Handsets
    1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.
    2. Press <KEY 9> to ring to all registered handsets
    pressed on that handset
    an internal call. the
    4.10.4 Make a 3
    -
    way Conference Call
    The conference call feature allows one external call to be shared with two
    handsets (in intercom).
    The three parties can share the conversation and no additional network
    subscription is required.
    During an external call:
    1.
    Follow Steps 1 to 4 in section 4.10.3.
    2. Press and hold <STAR> on the calling handset to establish the conference call
    Either handset can exit the conference by pressing <TALK OFF>, leaving the
    other handset still connected to the
    external call.
    5 PRIVATE PHONEBOOK
    Each handset can store up to 20 private phonebook entries with names and
    numbers. Each phonebook entry can have a maximum of 20 digits for the
    phone number and 12 characters for the name. You can also select different
    ringtones for your phonebook entries. (Note: the different ringtones only play if
    5.1 Add a New Phonebook Entry
    In idle:
    1. Press <PHONEBOOK> to access the phonebook.
    OR
    Press <MENU> and <UP/DOWN> to select PHONEBOOK and then press
    <OK> to access the phonebook.
    2. Press <MENU> to show ADD.
    3. Press <OK> and then enter the name.
    4. Press <OK> and then enter the number.
    5. Press <OK> and <UP/DOWN> to select the desired ringtone for your
    6. Press <OK> to store the phonebook entry.
    you subscribe to Caller Display and
    the incoming number matches the stored
    number.) Phonebook entries are stored alphabetically by name.
    phonebook entry.
    5.2 Search a Phonebook Entry
    In idle:
    1. Press <PHONEBOOK> to access the phonebook.
    2. Enter the first letter of the name using the alphanumeric keys, and then
    <UP/DOWN> to scroll to the entry you
    want.
    16
    Remote operation
    Using a tone-dialling phone, dial your home number
    You can also use the codes on the other side of this card
    While your outgoing message is playing, press
    Key in your remote security code
    The default code is 0000. For details of how to set a new code,
    see the User Guide 8.5.9.1 of page 31.
    1
    2
    3
    4
    Note: Press <*> key after OGM playback cannot access your answering machine
    remotely. If the 4-digit Remote Access PIN is entered incorrectly three times
    consecutively, the line will be released automatically.
    Note: If your answering machine is switched off, the phone will enter into
    the remote access mode after 10 rings.
    You can then enter the 4-digit remote access PIN
    (Default Remote Access PIN is 0000) to activate the remote access feature.
    Icarus 2020 system
    1 2 3 4
    10876
    5
    9
    11
    12
    13
    14
    15
    In a home with broadband, every telephone must have a micro-filter connected,
    not just the one at the telephone point that your modem is connected to.
    If you need more broadband micro-filters, contact your broadband supplier.
    3 GETTING TO KNOW YOUR PHONE
    3.1 Handset Overview
    The maximum range between the base station and the handset is approximately
    300 meters. Depending on the surrounding conditions as well as spatial and
    struct ural factors, the range may be reduced.
    2 INSTALLING YOUR PHONE
    2.1 Connecting the base station
    1) Plug the power supply
    & line cord into
    2) Plug the power adapter into a 230Vac,
    3) Always use the cables provided in the box
    Warning: Use only the provided adaptor, using
    other power supplies may cause a hazard.
    Warning: The power adaptor should be installed
    and the line cord into your telephone line socket.
    the base station.
    50Hz mains socket,
    The range indoors is normally less than outdoors, typically being up to 50 meters.
    near the equipment and should be easily accessible.
    Triple
    • 3 Handsets
    • 1 Base station
    • 1 Mains power adapter
    • 1 Telephone line cord
    6 rechargeable batteries
    • 1 User manual
    • 2 Charger pods with
    connected mains
    power adapters
    • 4 Handsets
    • 1 Base station
    • 1 Mains power adapter
    • 1 Telephone line cord
    • 1 User manual
    • 3 Charger pods with
    connected
    mains power adapters
    Quad
    8
    2.2 Installing and charging the batteries
    1) Place the 2 batteries as indicated, ensuring their
    2) Slide the battery compartment cover back.
    3) Put the handset on the base and charge for
    15 hours first time. A beep indicates that the handse
    polarity is correct.
    is properly placed on the base or cha
    rger.
    If you have a
    Broadband line
    If you connect your telephone to a line with
    insert a micro-filter between the telephone
    and the telephone line, otherwise you may get
    interference between the telephone and the broadband,
    which could cause problems.
    a broadband connection, you will need to
    Use only NiMH rechargeable batteries.
    rechargeable batteries
    WITH TELEPHONE ANSWERING MACHINE(TAM)CONTROL
    RECALL(also called FLASH)
    In idle / predialing mode:
    Press to insert a recall
    During a call:Press to dial
    a recall
    TALK ON
    In idle / predialing mode:
    Press to make a call
    In Redial list / Call List /
    Phonebookentry:
    Press to make a call to the
    selected entry in the list
    During ringing:
    Press to answer a call
    LEFT SOFT KEY(MENU/OK)
    In idle mode:Press
    to access the main menu
    In sub-menu mode:
    Press to confirm the selection
    During a call: Press to access
    Intercom/Phonebook/ Redial
    List/ Call List
    TALK OFF
    During a call: Press to end a call and go
    back to idle screen
    In menu / editing mode: Press to go back
    to previous menu
    In idle mode:
    Press and hold to power off the handset
    In idle mode (when the handset is powered
    off): Press and hold to power
    DOWN
    In idle mode:Press to access the redial list
    In menu mode:
    Press to scroll down the menu items
    In Phonebook list / Redial list / Call List:
    Press to scroll down the list
    During a call:
    Press to decrease the earpiece volume
    During ringing:
    Press to decrease the ringer volume
    UP
    In idle mode:
    Press to access the call list
    In menu mode:
    Press to scroll up the menu items
    In Phonebook list / Redial list /
    Call List:
    Press to scroll up the list
    During a call:
    Press to increase the
    earpiece volume
    During ringing:
    Press to increase the ringer volume
    RIGHT SOFT KEY(CLEAR/BACK/MUTE/INTERCOM)
    n main menu mode: Press to go back to idle screen
    In sub-menu mode: Press to go back to previous level
    In sub-menu mode: Press and hold to go back to idle screen
    In editing / predialing mode: Press to clear a character / digi
    t
    In editing / predialing mode:
    Press and hold to delete all the characters / digits
    During a call: Press to mute/ unmute the microphone
    In idle mode:Press to intercom another handset
    SPEAKERPHONE
    During a call:
    Press to turn on / off the speakerphone.
    Call List / Phonebook entry :
    Press to make a call with speakerphone
    During ringing:
    Press to answer a call with speakerphone
    During answering machine message playback /
    call screening:
    Press to play message via speaker
    5
    7.4.
    7.4.
    1
    2
    SET THE BASE RINGER MELODY .....................................................
    SET THE RINGER VOLUME ....................................................................................
    23
    3
    4
    5
    6
    9
    2
    2
    2
    3
    3
    3
    4
    4
    5
    8
    1
    8
    30
    3
    4
    6.
    7.
    8.
    9.
    12.
    IN USE LED
    Steadily ON: During a call
    Flashing: During ringing or new TAM message is received.
    VOLUME
    1
    2
    4
    5
    6
    7
    8
    9
    10
    11
    3
    12
    ...................... 22
    ca
    Icarus 2020 system
Binatone Icarus 2020

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le Icarus 2020 de la marque Binatone ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du Icarus 2020 de la marque Binatone de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Binatone Icarus 2020 ici. Ce manuel appartient à la catégorie Téléphones DECT / VoIP et a été évalué par 1 personnes avec une moyenne de 9.5. Ce manuel est disponible dans les langues suivantes: Engels. Vous avez une question sur le Icarus 2020 de la marque Binatone ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du Icarus 2020 de la marque Binatone

Généralités
Marque Binatone
Modèle Icarus 2020
Produit Téléphone DECT/VoIP
EAN 5012786433250, 5012786486270, 5012786486287
Langue Engels
Type de fichier PDF
représentation / réalisation
Type Téléphone DECT
Répondeur intégré Oui
Temps d'enregistrement 15 min
Nombre de sonneries 5
Design
Type de montage Bureau
Couleur du produit Noir
Caractéristiques de gestion
Horloge avec calendrier Oui
Caractéristiques du téléphone
Haut-parleur Oui
Compatible avec plusieurs combinés 2
Désactivation du microphone Oui
Sonnerie polyphonique Non
Capacité du répertoire 20 entrées
Gestion d'appel
Identification de l'appelant Oui
Recomposer Oui
Journal d'appels 10
Minuterie d'appel Oui
Écran
Écran integré Oui
Écran LCD
Couleur de Backlight Vert
Connectivité
Raccordements sans fil Non
Entrée DC Oui
Autres caractéristiques
Compatibilité Mac Non
Puissance
Temps de communication 10 h
Autonomie en veille 100 h
Technologie batterie Hybrides nickel-métal (NiMH)
Nombre de batteries prises en charge 2

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Binatone Icarus 2020.

Votre question n'est pas dans la liste ? Posez votre question ici

ModesdEmploi.fr

Vous cherchez un manuel ? ModesdEmploi.fr vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

ModesdEmploi.fr

© Copyright 2021 ModesdEmploi.fr. Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.

En savoir plus