Brother PT-1880

Brother PT-1880 mode d'emploi

  • 1
    / Español
    Printed in China
    With your PT-1880, you can create labels for any application. Select from the
    many frames, character sizes and styles to design beautiful custom labels. In
    addition, the variety of tape cartridges available allows you to print labels with
    different widths and exciting colors.
    Read this manual carefully before starting and keep the manual in a handy
    place for future reference.
    Use only Brother TZ tapes with this machine. Do not use tapes that do not have
    the mark.
    Do not disassemble or modify the machine/AC adapter.
    Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry
    Do not touch the print head mechanism. Use a soft wipe (e.g. a cotton swab) when
    cleaning the print head.
    To avoid injuries, do not touch the cutter's edge.
    To prevent damage or breakage, do not press on the LCD display.
    Do not put any foreign objects into or heavy objects on the machine.
    Do not leave any rubber or vinyl on the machine for an extended period of time,
    otherwise the machine may be stained.
    Do not get the machine/AC adapter/power plug wet, such as by handling them with
    wet hands or spilling beverages on to them.
    Do not expose the machine/AC adapter to extremely high temperatures or high
    humidity. Never leave them on the dashboard or in the back of your car, near heaters
    or other hot appliances. Keep them out of both direct sunlight and rain.
    Avoid using the machine in extremely dusty places.
    Depending on the environmental conditions and the applied settings, some
    characters or symbols may be difficult to read.
    Do not pull on the tape being fed from the P-touch labeler, otherwise the tape
    cassette or P-touch labeler may be damaged.
    Do not attempt to cut the tape while printing or feeding since this will damage the tape.
    Do not try to print labels using an empty tape cassette set in the P-touch labeler. Doing
    so will damage the print head.
    Remove the batteries and disconnect the AC adapter if you do not intend to use the
    machine for an extended period of time. (Note: When power is disconnected for more
    than five minutes, all text, format settings and any text files stored in the memory will
    be cleared.)
    Do not use old and new batteries together or mix alkaline batteries with other type
    batteries, or set the positive and negative end in the wrong position. Otherwise, the
    batteries may leak or be damaged.
    Do not use metallic articles, such as tweezers or metallic pen, when exchanging the
    Always use the specified voltage and the suggested AC adapter (AD-24) for this
    machine to prevent any damage or failure.
    To prevent fire or electric shock, make sure that the plug of the AC adapter is fully
    inserted into the power outlet. Do not use an outlet that is loose.
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
    This device may not cause harmful interference, and (2) this device must accept any interference received,
    including interference that may cause undesired operation.
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
    Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
    interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
    radio communications. However, there is no guarantee that interference will not occur in a particular
    installation. If this equipment does cause harmful interference to radio or television reception, which can be
    determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
    one or more of the following measures:
    - Reorient or relocate the receiving antenna.
    - Increase the separation between the equipment and receiver.
    - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    - Consult the dealer or an experienced radio/TV technician for help.
    - Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user’s
    authority to operate the equipment.
    Unpacking Your P-touch Labeler
    Check that the package contains the following before using your P-touch la-
    Included items may differ by distribution.
    Tape Cassettes
    Make sure that the power is turned off when replacing a tape cassette.
    Open the tape compartment cover by lifting up both sides at the same time.
    If a tape cassette is already installed, remove it by pulling it straight up.
    Insert a tape cassette, making sure that it snaps into place.
    Make sure that the end of the tape feeds under the tape guides.
    • If the ink ribbon is loose, use your finger to wind the toothed wheel in the
    direction of the arrow on the cassette.
    After you have installed the tape, feed the tape ( + ) once and then
    push in the tape cutter lever to cut the tape.
    Securely close the front cover, making sure that it snaps into place.
    Power Supply
    Make sure that the power is turned off when replacing batteries.
    Turn the machine over and remove the battery compartment cover.
    If batteries are already installed, remove them.
    Insert six new AA-size alkaline
    batteries (LR6), making sure that
    their poles point in the correct
    directions. Always replace all six
    batteries at the same time using
    brand new ones.
    Attach the battery compartment cover by inserting the three hooks at the
    bottom into the slots on the machine, then pushing down firmly on the
    cover until it snaps into place.
    When using optional AC adapter (model
    Insert the plug on the adapter cord into
    the adapter jack on the right side of the
    Insert the plug into the nearest standard
    electrical outlet.
    For memory back up, we recommend using
    AA-size alkaline batteries (LR6) together
    when using the AC adapter.
    TZ tape cassette
    Accessories Guide
    User's Guide
    Warranty Card
    Tape compartment
    End of tape
    Tape guide
    Toothed Wheel
    Battery compartment
    Keyboard & LCD
    Turning the Power On
    Setting Language (
    > [Language] / > [English] /
    Setting unit (inch/mm)
    > [Unit] / > [inch] /
    The LCD shows one row of 15 characters; however, the text that
    you enter can be up to 80 characters in length, which will scroll
    across the display.
    Use with Shift key to go to beginning/end of the text.
    The machine automatically turns off if no key is pressed within 5
    To cancel operations, press .
    To initialize the P-touch labeler back to factory settings, turn off the
    machine and then while holding down and , press to
    turn the machine back on. Finally, release and .
    Preview key
    Font keys
    Character keys
    Tab key
    Caps key
    Shift key
    Symbol key
    Auto Format key
    Label Length
    Cursor keys
    Function key
    Power key
    Backspace key
    Enter key
    Shift key
    Accent key
    Space key
    Tape cutter lever
    Esc key
    OK key
    Print key
    Error message
    What to do when...
    Accessories (Supplies may differ by distribution.)
    Message Cause/Remedy
    Battery Weak! The batteries are weak. Replace them with new ones.
    Check Battery! The installed batteries are about to run out.
    Invalid! There is no text above the cursor when you set Number-
    Invalid character is selected for Numbering.
    Invalid number is selected for Tab Length or Label Length.
    No Text! You tried to print a text file when there is no data stored in
    the memory.
    The Print key is pressed when no text is entered.
    You tried to set Copies, Numbering or Mirror when no text
    is entered.
    Line Limit! You tried to enter a 3rd line by pressing Enter key.
    You tried to print a 2 line text when 9/64" (3.5 mm) or 1/4"
    (6 mm) tape is installed.
    No Cassette! You tried to print a label when there is no cassette installed.
    Cutter Error! Tape cutter lever is used in the middle of printing process.
    Full! The maximum number of characters (80 characters) have
    already been entered.
    Text Too Long! The text length exceeds the selected label length or the
    selected Auto Format setting length.
    No Frame OK? Printing on 9/64" (3.5 mm) tape with invalid Frame setting
    ON. (Select to print with no Frame, to cancel.)
    Problem Solution
    The display stays blank
    after you have turned on
    the machine.
    Check that the batteries are correctly inserted.
    If the batteries are weak, replace them.
    Check that the AC adapter is correctly connected.
    When the label is
    printed out, there is too
    much margin (space) on
    both sides of the text.
    Refer to "Setting [Margin] (Tape Margin)" on this users
    guide and select [Half] or [Narrow] to have smaller margins
    for your label.
    The machine does not
    print, or the printed
    characters are not
    formed properly.
    Check that the tape cassette has been inserted correctly.
    If the tape cassette is empty, replace it.
    Check the tape compartment cover is properly closed.
    The setting has cleared
    on its own.
    The batteries may be weak. Replace them.
    When power is disconnected for more than five minutes, all
    text & formats in the display will be lost. Language and unit
    settings will also be cleared.
    A blank horizontal line
    appears through the
    printed label.
    There maybe some dust on the print head. Remove the
    tape cassette and use a dry cotton swab to gently wipe the
    print head with and up-and-down motion.
    The print head can be cleaned more easily if the optional
    print head cleaning cassette (TZ-CL4) is used.
    The machine has
    "locked up" (i.e., nothing
    happens when a key is
    pressed, even though
    the machine is on.)
    Turn off the machine, and then while holding
    down and , press to turn the machine back
    on. Finally, release and .
    Note: The text and formats in the display are erased. Also,
    the language and unit settings will be cleared.
    The power turns off
    when you try to print.
    The batteries may be weak. Replace them.
    Check that the batteries are correctly inserted.
    The tape does not feed
    properly or the tape gets
    stuck inside the machine.
    Check that the end of the tape feeds under the tape guides.
    The cutter lever is used while printing. Do not touch the
    cutter lever during printing.
    All text and format settings
    need to be cleared to
    create a new label.
    Press while holding down , and select [Text&For-
    Item Specification
    Dimensions 6.6" (W) × 8.5" (D) × 2.2" (H)
    (167mm (W) × 215mm (D) × 57mm (H))
    Weight 1.26 lbs. (570 g) (without batteries and tape cassette)
    Power supply Six AA-size alkaline batteries (LR6) or optional AC adapter
    (model AD-24)
    Tape cassette Brother TZ tape (width) :
    9/64" (3.5 mm), 1/4" (6 mm), 3/8" (9 mm), 1/2" (12 mm), 3/4" (18 mm)
    Accessories Stock No.
    Tape Cassettes See the attached "Supplies and Accessories Guide".
    AC Adapter model AD-24
    Carrying Case CC3500
    Setting Font
    Switching Upper Case/Lower Case
    Making Two Line Text
    Move the cursor to where the second line starts and press .
    Use either 3/8" (9 mm) or 1/2" (12 mm), or 3/4" (18 mm) wide tape for two line text.
    Entering Symbols
    To go to the next group, press .
    To cancel operations, press .
    Entering Accented Characters
    >>/ > /
    To cancel operations, press .
    The order of accented characters differ by the selected LCD language.
    To Clear
    To delete a character one by one
    To delete all text
    > [Clear] > [Text Only]
    To delete all text & format
    > [Clear] > [Text & Format]
    You can also go into [Text & Format] / [Text Only] by pressing + .
    Accented Characters Accented Characters
    Upper case ( ON) Lower case ( OFF)
    Display Label image
    Setting [Size]
    > [Size] > [Large]
    Automatically adjusts the text size according to the tape width.
    Select MAX to print with maximum text size when using 3/4" (18 mm) tape, all
    texts are in upper case, the Style setting is [Normal], and the Underline/Frame
    setting is [Off].
    Setting [Width]
    > [Width] > [×2]
    Setting [Style] (Vertical)
    > [Style] > [Vertical]
    Setting [Underline/Frame]
    > [Underline/Frame] > [Underline]
    Frames cannot be printed on 9/64" (3.5 mm) tape.
    Setting [Label Length]
    (Auto / 1.2" - 12.0"
    > [Label Length] >
    You can also select the length by entering the length with Num keys.
    To return to [Auto], press .
    Setting [Tab]
    You can make aligned texts by setting tabs.
    Example: To set a tab between "ABC" and "D"
    The cursor should be positioned where you set a tab.
    Setting [Tab Length](Auto / 0.0" - 4.0")
    > [Tab Length] >
    You can also select the length by entering the length with Num keys.
    To return to [Auto], press .
    Setting [Auto Format]
    You can choose label length from six formats to create labels for various ap-
    > [VHS Spine]
    Text Preview
    You can preview the text before printing.
    The LCD shows the whole text and the label length (inch/mm), then returns to the
    original text.
    Only the text can be previewed, not the font, style, size, underline/frame or any
    additional features.
    Feeding (Tape Feed)
    The machine will feed 1.0" of tape, which may be needed when installing a new tape
    cassette or when using the [Chain Print] feature.
    To cut off the label, push in the tape cutter lever on the upper-left corner of the
    To prevent damage to the tape, do not try to cut while the message "Print" or "Feed"
    is displayed.
    Setting [Margin] (Tape Margin)
    > [Margin] > [Full]
    [Full]/[Half]/[Narrow] is for leaving equal margins on both sides of the text.
    NOTE: Cut along the printed dots (:) with scissors so the text is centered in the label.
    [Chain Print] is for printing more than 1 copy of a label with minimum margin
    <e.g. 1>. You can also create a label containing text in various styles; print a
    text in one style, and before feeding, enter the second text in another style
    <e.g. 2>.
    Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the
    tape since this may damage the tape cassette.
    Using [Print Option]
    You can print up to 9 copies of each label.
    > [Print Option] > [Copies] >
    You can also select the number of copies by entering with Num keys.
    You can print many copies of the same text while increasing a selected
    number by 1 after each label is printed.
    Example: To print copies of a label containing a serial number (0123, 0124 and 0125)
    [Print Option] >
    [Numbering] >
    Select the highest number you wish to be printed when setting the number.
    Print Option
    [Mirror Print?]
    Use clear tape in [Mirror], so the labels can be read correctly from the oppo-
    site side when attached on glass, windows or other transparent surfaces.
    Peel the printed label from backing and apply the label.
    Memory (File)
    You can save your original labels on to your machine. Up to five labels can
    be saved and recalled for printing whenever you desire. You can also edit and
    overwrite the stored label.
    >> [File] >>
    To Save:
    > [Save] >
    To Print:
    > [Print] >
    To Open:
    > [Open] >
    Function Shortcuts
    In addition to the basic steps to search for a function, the PT-1880 provides
    you with function shortcuts so you can easily jump to a frequently used func-
    tion just by pressing and the shortcut key shown in the table below. To
    confirm, press .
    [Large] [Medium] [Small] [MAX]
    [Normal] [×2] [×1/2]
    [Normal] [Bold] [Outline]
    [Shadow] [Italic] [Italic Bold]
    [Italic Outl](Italic Outline)
    [Italic Shadow] [Vertical]
    [Off] [Underline] [Round] [Candy] [Callout]
    [Banner] [Wooden] [Vine] [Hand] [Flower]
    Application Length Application Length
    VHS Spine 5.5" CD Case Spine 4.4"
    MiniDV Spine 1.6" File Tab 3.2"
    Audio Tape 3.5" Divider Tab 1.6"
    Display Label image
    ABC D
    1/2" 1/2"
    Full Half Narrow
    <e.g. 1> <e.g. 2>
    (feed & cut) (feed & cut)
    Chain Print
    If you try to store a label when there is already a label stored to that
    number, a message "Overwrite?" will appear. Press to save your
    new label. Press to cancel.
    Key Function Key Function
    [Size] [Margin]
    [Width] [Tab Length]
    [Style] [Print Option]
    [Underline/Frame] [Language]
    [File] [Unit]
    [Label Length] [Clear]
    Should you encounter any problems with your product, please do not
    return your product to the store!
    After referring to the User's guide, if you still need assistance, call Brother
    Customer Service at:
    Voice : 1-877-4-PTOUCH
    Web :
    Fax : 1-901-379-1210
    If you need to locate a service center, please call 1-800-284-HELP or visit
    us at
    (+ )
Brother PT-1880

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le PT-1880 de la marque Brother ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du PT-1880 de la marque Brother de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Brother PT-1880 ici. Ce manuel appartient à la catégorie Imprimantes d'étiquettes et a été évalué par 1 personnes avec une moyenne de 6. Ce manuel est disponible dans les langues suivantes: Anglais, Espagnol. Vous avez une question sur le PT-1880 de la marque Brother ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du PT-1880 de la marque Brother

Marque Brother
Modèle PT-1880
Produit Imprimante d'étiquettes
EAN 12502617051, 12502629184
Langue Anglais, Espagnol
Type de fichier PDF
Vitesse d'impression
Résolution maximale 180 x 180
Impression vertical
Vitesse d'impression (mesure métrique) 10
Disposition des touches du clavier QWERTY
Écran LCD
Autres caractéristiques
Capacité mémoire 400caractères
Dimensions (LxPxH) 167.67 x 215.9 x 55.88
Taille de la bande magnétique 3.57
Nombre de batteries prises en charge 6
Type de batterie AA
représentation / réalisation
Type de bande magnétique TZ
Nombre de styles 9
Nombre de polices 2
Lignes d'impression max 2
Gestion du papier
Longueur max. de l'étiquette 300

Manuels de produits associés

Imprimante d'étiquettes Brother

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Brother PT-1880.

Votre question n'est pas dans la liste ? Posez votre question ici

Vous cherchez un manuel ? vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

© Copyright 2020 Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.

En savoir plus