When the second hand is at 12 o’clock, pull out the 1.
crown to the second click to stop it.
Set the hands by rotating the crown. Move the 2.
minute hand four or five minutes past the setting
you want, and then back them up to the setting.
Push the crown back in on a time signal to resume 3.
timekeeping.
To set the day and day of the week
Avoid setting the day and day of the week between •
9:00 p.m. and 5:00 a.m. The day and day of the
week may not change in the following day if you do.
Pull out the crown to the first click.1.
Set the day by rotating the crown counterclockwise.2.
Set the day of the week by rotating the crown clockwise.3.
Push the crown back in to its normal position.4.
For watch with the elapsed time bezel •
Rotate the elapsed time bezel to align the
mark with the
minute hand.
After certain amount of time elapsed, read the graduation on the
elapsed time bezel which the minute hand points to.
The elapsed time is indicated.
Specifications
Module No.
Accuracy at normal
temperature
(per month)
Battery typeBattery life
5125/5128±20 secondsSR626SWApprox. 3 years
Elapsed time bezel
Crown
(Normal position)
First click
(Day, day of week setting)
Second click
(Time setting)
Your watch may differ somewhat from the one shown in the illustration.•
Notes
Some water resistant models are equipped with a screw lock •
crown.
With such models, you must unscrew the crown in the direction •
noted in the illustration to loosen it before you can pull it out.
Do not pull too forcibly on such crowns.
Also note that such watches are not water resistant while their •
crowns are loosened. Be sure to screw the crowns back in as
far as they will go after making any setting.
[
Module 5128
]
To set the time
When the second hand is at 12 o’clock, pull out the 1.
crown to the second click to stop it.
Set the hands by rotating the crown. Move the 2.
minute hand four or five minutes past the setting
you want, and then back them up to the setting.
Push the crown back in on a time signal to resume 3.
timekeeping.
To set the day
Avoid setting the day between 9:00 p.m. and 1:00 •
a.m. The day may not change in the following day if
you do.
Pull out the crown to the first click.1.
Set the day by rotating the crown.2.
Push the crown back in to its normal position.3.
First click (Day setting)
Second click
(Time setting)
Crown
(Normal position)
Whatsapp
Mail
Facebook
Besoin d’aide?
Nombre de questions : 0
Vous avez une question sur le EF-129D-7AVEF de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du EF-129D-7AVEF de la marque Casio de répondre correctement à votre question.
À propos de Casio EF-129D-7AVEF
Consultez gratuitement le manuel de la marque Casio EF-129D-7AVEF ici. Ce manuel appartient à la catégorie Montres et a été évalué par 1 personnes avec une moyenne de 8.5. Ce manuel est disponible dans les langues suivantes: Engels. Vous avez une question sur le EF-129D-7AVEF de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici
Spécifications du EF-129D-7AVEF de la marque Casio
Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Casio EF-129D-7AVEF.
Une des piles de mon Montre a commencé à rouiller. Puis-je toujours utiliser cet appareil en toute sécurité ?
Le produit peut toujours être utilisé en toute sécurité après un nettoyage approprié. Retirez la pile avec des gants et nettoyez le compartiment à piles avec une brosse à dents et du vinaigre. Après séchage, de nouvelles piles peuvent être insérées dans l'appareil.
Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.
1Operation Guide ANA (MAA)MA0906-EA[Module 5125]To set the timeWhen the second hand is at 12 o’clock, pull out the 1.crown to the second click to stop it.Set the hands by rotating the crown. Move the 2.minute hand four or five minutes past the settingyou want, and then back them up to the setting.Push the crown back in on a time signal to resume 3.timekeeping.To set the day and day of the weekAvoid setting the day and day of the week between •9:00 p.m. and 5:00 a.m. The day and day of theweek may not change in the following day if you do.Pull out the crown to the first click.1.Set the day by rotating the crown counterclockwise.2.Set the day of the week by rotating the crown clockwise.3.Push the crown back in to its normal position.4.For watch with the elapsed time bezel •Rotate the elapsed time bezel to align themark with theminute hand.After certain amount of time elapsed, read the graduation on theelapsed time bezel which the minute hand points to.The elapsed time is indicated.SpecificationsModule No.Accuracy at normaltemperature(per month)Battery type Battery life5125/5128 ±20 seconds SR626SW Approx. 3 yearsElapsed time bezelCrown(Normal position)First click(Day, day of week setting)Second click(Time setting)Your watch may differ somewhat from the one shown in the illustration.•NotesSome water resistant models are equipped with a screw lock •crown.With such models, you must unscrew the crown in the direction •noted in the illustration to loosen it before you can pull it out.Do not pull too forcibly on such crowns.Also note that such watches are not water resistant while their •crowns are loosened. Be sure to screw the crowns back in asfar as they will go after making any setting.[Module 5128]To set the timeWhen the second hand is at 12 o’clock, pull out the 1.crown to the second click to stop it.Set the hands by rotating the crown. Move the 2.minute hand four or five minutes past the settingyou want, and then back them up to the setting.Push the crown back in on a time signal to resume 3.timekeeping.To set the dayAvoid setting the day between 9:00 p.m. and 1:00 •a.m. The day may not change in the following day ifyou do.Pull out the crown to the first click.1.Set the day by rotating the crown.2.Push the crown back in to its normal position.3.First click (Day setting)Second click(Time setting)Crown(Normal position)
