Casio G-7900-1ER

Casio G-7900-1ER mode d'emploi

(1)
  • 1
    Operation Guide 3194
    MA0905-EB
    Getting Acquainted
    Warning!
    The measurement functions built into this watch are not intended for use in
    taking measurements that require professional or industrial precision. Values
    produced by this watch should be considered as reasonably accurate
    representations only.
    The longitude, lunitidal interval, Moon phase indicator and tide graph data that
    appear on the display of this watch are not intended for navigation purposes.
    Always use proper instruments and resources to obtain data for navigation
    purposes.
    This watch is not an instrument for calculating low tide and high tide times. The
    tide graph of this watch is intended to provide a reasonable approximation of
    tidal movements only.
    CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any
    claims by third parties that may arise through the use of this watch.
    Timekeeping Mode World Time ModeAlarm ModeCountdown Timer
    Mode
    Stopwatch
    Mode (ST1)
    Tide/Moon Data
    Mode
    Stopwatch
    Mode (ST2)
    Press .
    Screen
    To do this:
    Reset the seconds to
    Toggle between Daylight Saving
    Time ( ) and Standard Time ( )
    Specify the UTC offset
    Change the hour or minutes
    Change the year
    Change the month or day
    Do this:
    Press D.
    Press D.
    Use D (+) and B (–).
    Use D (+) and B (–).
    About This Manual
    Button operations are indicated using the letters shown
    in the illustration.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    General Guide
    Press C to change from mode to mode.
    In any mode (except when a setting screen is on the display), press L to illuminate
    the display.
    Timekeeping
    Use the Timekeeping Mode to set and view the current
    time and date.
    The tide graph shows tidal movements for the current
    date in accordance with the current time as kept in the
    Timekeeping Mode.
    The Moon phase indicator shows the current Moon
    phase in accordance with the current date as kept in the
    Timekeeping Mode.
    Important!
    Be sure to configure the current time and date, and your
    Home Site data (data for the site where you use the
    watch) correctly before using the functions of this watch.
    See “Home Site Data” for more information.
    Setting the Time and Date
    This watch is preset with UTC offset values that represent each time zone around the
    globe. Before setting the time, be sure to set the UTC offset for your Home Site first,
    which is the location where you normally will be using the watch.
    Note that World Time Mode times are all displayed based on the time and date
    settings you configure in the Timekeeping Mode.
    To set the time and date
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    Be sure to configure the correct UTC offset for your
    Home Site before configuring any other Timekeeping
    Mode settings.
    See the “City Code Table” for information about the
    UTC offset settings that are supported.
    2. Press C to move the flashing in the sequence shown below to select other
    settings.
    Seconds UTC offset
    Hour
    Year MinutesDay
    DST
    Month
    Home time zone
    Day of week
    Month – Day
    Hour : Minutes
    PM indicator
    Tide graph
    Moon phase indicator
    Seconds
    3. When the setting you want to change is flashing, use D and B to change it as
    described below.
    See Daylight Saving Time (DST) for details about DST setting
    .
    The UTC offset setting range is 12.0 to +14.0, in 0.5-hour units.
    When DST is turned on, the UTC offset setting range is 11.0 to +15.0, in
    0.5-hour units.
    4. Press A twice to exit the setting screen.
    The day of the week is displayed automatically in accordance with the date (year,
    month, and day) settings.
    Daylight Saving Time (DST)
    Daylight Saving Time (summer time) advances the time setting by one hour from Standard
    Time. Remember that not all countries or even local areas use Daylight Saving Time.
    To toggle the Timekeeping Mode time between DST and Standard Time
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press C to display the DST setting screen.
    3. Press D to toggle between Daylight Saving Time
    (
    displayed) and Standard Time (
    displayed).
    4. Press A twice to exit the setting screen.
    The DST indicator appears on the Timekeeping, and
    Tide/Moon Data screens to indicate that Daylight Saving
    Time is turned on. In the case of the Tide/Moon Data
    Mode, the DST indicator appears on the Tide Data
    screen only.
    To toggle between 12-hour and 24-hour timekeeping
    In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-
    hour timekeeping.
    With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
    times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
    hour digits for times in the range of midnight to 11:59 a.m.
    With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
    any indicator.
    The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
    applied in all other modes.
    The P indicator is not displayed when the current time is displayed in other modes.
    DST indicator
Casio G-7900-1ER

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le G-7900-1ER de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du G-7900-1ER de la marque Casio de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Casio G-7900-1ER ici. Ce manuel appartient à la catégorie Montres et a été évalué par 1 personnes avec une moyenne de 6.9. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le G-7900-1ER de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du G-7900-1ER de la marque Casio

Généralités
Marque Casio
Modèle G-7900-1ER
Produit Montre
EAN 4971850432272
Langue Anglais
Type de fichier PDF
Détails techniques
Fonction 1/1min - 24h
Fonction Alarme
Calendrier
Précision ±15
Résistant aux chocs
Fonction Snooze
Mode horloge 12h/24h
Humidité : étanche jusqu'à 200
Design
Type de verre de montre mineral
Matériau du boîtier/corps resin
Matière de la bande resin
Puissance
Type de batterie CR2025
Autonomie batterie 2année(s)
Nombre de batteries prises en charge 1
Autres caractéristiques
Dimensions (LxPxH) 50 x 17.7 x 52.4
Poids et dimensions
Poids 68.2

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Casio G-7900-1ER.

Votre question n'est pas dans la liste ? Posez votre question ici

ModesdEmploi.fr

Vous cherchez un manuel ? ModesdEmploi.fr vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

ModesdEmploi.fr

© Copyright 2020 ModesdEmploi.fr. Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.

En savoir plus