Casio GA-110C-1AER

Casio GA-110C-1AER mode d'emploi

(1)
  • Operation Guide 5146
    1
    MO1003-EA
    About This Manual
    Depending on the model of your watch, display text
    appears either as dark figures on a light background or
    light figures on a dark background. All sample displays
    in this manual are shown using dark figures on a light
    background.
    Button operations are indicated using the letters shown
    in the illustration.
    Note that the product illustrations in this manual are
    intended for reference only, and so the actual product
    may appear somewhat different than depicted by an
    illustration.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    Alarm Mode
    Countdown Timer Mode
    World Time Mode
    Stopwatch Mode
    General Guide
    Press C to change from mode to mode.
    In any mode (except a setting mode), press B to illuminate the display.
    Timekeeping Mode
    Press C.
    Timekeeping
    You can adjust the Home Time city date and time in the Timekeeping Mode.
    The analog time of this watch is synchronized with the digital time. The analog time
    setting is adjusted automatically whenever you change the digital time.
    If the analog time does not match the digital time for any reason, use the procedure
    described under “To adjust home positions” to match the analog setting to the digital
    setting.
    Pressing D in the Timekeeping Mode toggles digital display between the Home City
    Date and Home City Time.
    D
    Home City Date Home City Time
    Month Day
    Seconds
    Day of week
    Hour : Minutes Seconds
    PM indicator
    Day of week
    To set the digital time and date
    1. In the Timekeeping Mode, hold down A for about three
    seconds until the currently selected city code flashes in
    the upper digital display. This is the setting mode.
    2. Use D (east) and B (west) to select the city code you
    want.
    Make sure you select your Home City code before
    changing any other setting.
    For full information on city codes, see the “City Code
    Table”.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    Hour : Minutes
    City code
    PM indicator
    Seconds
    3. Press C to change the flashing screen content in the sequence shown below to
    select the other setting.
    Seconds
    12/24-Hour
    Format
    Hour
    Minutes
    DST
    Month
    Year
    City Code
    Day
    Illumination
    Duration
    4. When the setting you want to change is flashing, use D or B to change it as
    described below.
    Change the city code
    Toggle the DST setting between
    Daylight Saving Time (on) and
    Standard Time (OFF).
    Use D (east) and B
    (west).
    Press D.
    Screen: To do this: Do this:
    5. Press A to exit the setting mode.
    The day of the week is displayed automatically in accordance with the date (year,
    month, and day) settings.
    Toggle between 12-hour (12H) and
    24-hour (24H) timekeeping
    Reset the seconds to 00
    Change the hour and minutes
    Change the year, month, or day
    Toggle the display illumination
    duration between 1.5 seconds (LT1)
    and three seconds (LT3)
    Press D.
    Press D.
    Use D (+) and B (–).
    Press D.
    Daylight Saving Time (DST)
    Daylight Saving Time (summer time) advances the time setting by one hour from
    Standard Time. Remember that not all countries or even local areas use Daylight
    Saving Time.
    To change the Daylight Saving Time (summer time) setting
    1. In the Timekeeping Mode, hold down A for about three
    seconds until the currently selected city code flashes in
    the upper digital display. This is the setting mode.
    2. Press C. This will display the DST setting screen.
    3. Use D to toggle the DST setting on (on) and off (OFF).
    The default DST setting is off (OFF).
    4. When the setting you want is selected, press A to exit
    the setting mode.
    The DST indicator appears to indicate that Daylight
    Saving Time is turned on.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    DST indicator
    12-hour and 24-hour timekeeping
    With the 12-hour format, the PM indicator (P) appears for times in the range of noon to
    11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m.
    With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
    the PM indicator (P).
    The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
    applied in all other modes.
    Stopwatch
    You can use the stopwatch to measure elapsed time, lap
    times and split times. If you specify a distance value, the
    stopwatch also will calculate and display speeds.
    The digital display range of the stopwatch is 99 hours,
    59 minutes, 59.999 seconds. The stopwatch continues
    to run until you stop it. If it reaches the above limit, it will
    restart the time measurement from zero.
    The stopwatch operation continues even if you exit the
    Stopwatch Mode. If you exit the Stopwatch Mode while a
    stopwatch operation is in progress, the segments along
    the top of the upper digital display (upper display
    segments) will indicate the seconds of the current time.
    Each segment represents one second. This is to let you
    know that a stopwatch operation is in progress.
    All of the operations in this section are performed in the
    Stopwatch Mode, which you enter by pressing C.
    Speed hand
    Upper display
    segments
    Important!
    Check to make sure that the speed hand is not moving before you perform any
    Stopwatch Mode button operation.
    Specifying a Distance Value
    You can use the procedure below to specify a distance value, if you want. If you
    specify a distance value, the watch will calculate and indicate speed for certain
    stopwatch operations.
    The distance value represents kilometers, miles, or any other distance unit you want.
    Specifying a distance value of 10.0, for example, can mean 10.0 kilometers or 10.0
    miles.
    No speed calculation is performed when 0.0 is specified as the current distance
    value.
    For lap time readings, you can specify either the lap distance (when all the laps are
    the same distance) or the total race distance.
    For split time readings, you can specify the total race distance only. Though the
    watch will indicate a speed each time you take a split reading, they will be based on
    the total race distance, and so they will not indicate actual intermediate split speeds.
Casio GA-110C-1AER

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le GA-110C-1AER de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du GA-110C-1AER de la marque Casio de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Casio GA-110C-1AER ici. Ce manuel appartient à la catégorie Montres et a été évalué par 1 personnes avec une moyenne de 7.5. Ce manuel est disponible dans les langues suivantes: Engels. Vous avez une question sur le GA-110C-1AER de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du GA-110C-1AER de la marque Casio

Généralités
Marque Casio
Modèle GA-110C-1AER
Produit Montre
EAN 4971850479147
Langue Engels
Type de fichier PDF
Détails techniques
Appareil de chronometrage Oui
Fonction heure internationale Oui
Fonction 1/1min - 24h
Fonction Alarme Oui
Calendrier Oui
Rétroéclairage à LED Oui
Précision ±15 sec/mois
Résistant aux chocs Oui
Fonction Snooze Oui
Mode horloge 12h/24h
Profondeur de l’étanchéité 200 m
Design
Type de verre de montre Minéral
Matériau du boîtier de montre Résine
Matière de la bande Résine
Puissance
Type de batterie CR1220
Autonomie batterie 2 année(s)
Nombre de batteries prises en charge 1
Autres caractéristiques
Dimensions (LxPxH) 51.2 x 16.9 x 55 mm
Poids et dimensions
Poids 72 g

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Casio GA-110C-1AER.

Votre question n'est pas dans la liste ? Posez votre question ici

ModesdEmploi.fr

Vous cherchez un manuel ? ModesdEmploi.fr vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

ModesdEmploi.fr

© Copyright 2021 ModesdEmploi.fr. Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.

En savoir plus