Casio LW-S200H-1AEF

Casio LW-S200H-1AEF mode d'emploi

(1)
  • Operation Guide 3197
    1
    MO1004-EA
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to read this manual carefully.
    Keep the watch exposed to bright light
    The electricity generated by the solar cell of the watch is
    stored by a rechargeable battery. Leaving or using the
    watch where it is not exposed to light causes the battery
    to run down. Make sure the watch is exposed to light as
    much as possible.
    When you are not wearing the watch on your wrist,
    position the face so it is pointed at a source of bright
    light.
    You should try to keep the watch outside of your sleeve
    as much as possible. Charging is reduced significantly if
    the face is covered only partially.
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    Bright Light
    Solar cell
    All
    functions
    enabled
    LEVEL 1
    LEVEL 2
    LEVEL 3
    LEVEL 4
    Charge
    Rechargeable battery
    Bright Light
    Electrical
    energy
    Solar cell
    (Converts light to
    electrical power.)
    LEVEL 1
    LEVEL 2
    LEVEL 3
    LEVEL 4
    Some or all
    functions
    disabled
    Dis-
    charge
    Battery charges in the light. Battery discharges in the dark.
    The watch continues to operate, even when it is not exposed to light. Leaving the
    watch in the dark can cause the battery to run down, which will result in some watch
    functions to be disabled. If the battery goes dead, you will have to re-configure watch
    settings after recharging. To ensure normal watch operation, be sure to keep it
    exposed to light as much as possible.
    The actual level at which some functions are disabled depends on the watch model.
    Frequent display illumination can run down the battery quickly and require charging.
    The following guidelines give an idea of the charging time required to recover from a
    single illumination operation.
    Approximately 5 minutes exposure to bright sunlight coming in through a window
    Approximately about 8 hours exposure to indoor fluorescent lighting
    Be sure to read “Power Supply” for important information you need to know
    when exposing the watch to bright light.
    If the display of the watch is blank...
    If the display of the watch is blank, it means that the watch’s Power Saving function
    has turned off the display to conserve power.
    See “Power Saving Function” for more information.
    About This Manual
    Button operations are indicated using the letters shown in the illustration.
    Each section of this manual provides you with the information you need to perform
    operations in each mode. Further details and technical information can be found in
    the “Reference” section.
    Countdown Timer Mode
    Alarm Mode
    World Time Mode
    General Guide
    Press C to change from mode to mode.
    In any mode (except when a setting screen is on the display), press B to illuminate
    the display.
    Timekeeping Mode
    Press C.
    Stopwatch Mode
    Recall Mode
    Demo Mode
    In the Timekeeping Mode, holding down C for about three seconds will enter the
    demo mode. In the demo mode, the screen cycles through the normal timekeeping,
    stopwatch, and World Time screens in five-second intervals.
    To exit the demo mode
    Press any button.
    Timekeeping
    Use the Timekeeping Mode to set and view the current time and date.
    Read This Before You Set the Time and Date!
    This watch is preset with a number of city codes, each of which represents the time
    zone where that city is located. When setting the time, it is important that you first
    select the correct city code for your Home City (the city where you normally use the
    watch). If your location is not included in the preset city codes, select the preset city
    code that is in the same time zone as your location.
    Note that all of the times for the World Time Mode city codes are displayed in
    accordance with the time and date settings you configure in the Timekeeping Mode.
    Hour : Minutes
    Seconds
    Day of week
    Year – Month – Day
    PM indicator
    To set the time and date manually
    1. In the Timekeeping Mode hold down A until the city
    code starts to flash, which indicates the setting screen.
    2. Use D and B to select the city code you want.
    Make sure you select your Home City code before
    changing any other setting.
    For full information on city codes, see “City Code
    Table”.
    3. Press C to move the flashing in the sequence shown below to select the other
    settings.
    Seconds
    12/24-Hour
    Format
    Hour
    Minutes
    DST
    Month
    Year
    City Code
    DayPower Saving
    Illumination
    Duration
    Button
    Operation Tone
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    l
    4. When the timekeeping setting you want to change is flashing, use D or B to
    change it as described below.
    Change the city code
    Toggle between Daylight Saving Time ( )
    and Standard Time ( ).
    Toggle between 12-hour (
    ) and 24-
    hour ( ) timekeeping
    Reset the seconds to
    Change the hour and minutes
    Use D (east) and B
    (west).
    Press D.
    Press D.
    Press D.
    Use D (+) and B (–).
    Screen: To do this: Do this:
    The following steps explain how to configure timekeeping settings only.
    5. Press A to exit the setting screen.
    The day of the week is displayed automatically in accordance with the date (year,
    month, and day) settings.
    Change the year, month, or day
    Toggle the button operation tone between
    (on) and (off)
    Toggle the illumination duration between
    (approximately 1.5 seconds) and
    (approximately 3 seconds).
    Toggle between Power Saving on (
    ) and
    off (
    )
    Use D (+) and B (–).
    Press D.
    Press D.
    Press D.
    /
    12-hour and 24-hour timekeeping
    With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
    times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
    hour digits for times in the range of midnight to 11:59 a.m.
    With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
    any indicator.
    The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
    applied in all other modes.
    Daylight Saving Time (DST)
    Daylight Saving Time (summer time) advances the time setting by one hour from
    Standard Time. Remember that not all countries or even local areas use Daylight
    Saving Time.
Casio LW-S200H-1AEF

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le LW-S200H-1AEF de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du LW-S200H-1AEF de la marque Casio de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Casio LW-S200H-1AEF ici. Ce manuel appartient à la catégorie Montres et a été évalué par 1 personnes avec une moyenne de 7.5. Ce manuel est disponible dans les langues suivantes: Engels. Vous avez une question sur le LW-S200H-1AEF de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du LW-S200H-1AEF de la marque Casio

Généralités
Marque Casio
Modèle LW-S200H-1AEF
Produit Montre
EAN 2601570038936, 4971850474340
Langue Engels
Type de fichier PDF
Détails techniques
Appareil de chronometrage Oui
Fonction heure internationale Oui
Fonction 5/5s - 100h
Fonction Alarme Oui
Calendrier Oui
Rétroéclairage à LED Oui
Précision ±30 sec/mois
Fonction Snooze Oui
Mode horloge 12h/24h
Profondeur de l’étanchéité 100 m
Puissance
Énergie solaire Oui
Type de batterie CTL1616
Indicateur du niveau de recharge Oui
Nombre de batteries prises en charge 1
Design
Matériau du boîtier de montre Résine
Matière de la bande Résine
Autres caractéristiques
Dimensions (LxPxH) 38.6 x 13.4 x 44.8 mm
Poids et dimensions
Poids 33 g

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Casio LW-S200H-1AEF.

Votre question n'est pas dans la liste ? Posez votre question ici

ModesdEmploi.fr

Vous cherchez un manuel ? ModesdEmploi.fr vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

ModesdEmploi.fr

© Copyright 2021 ModesdEmploi.fr. Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.