Casio SGW-300HD-1AVER

Casio SGW-300HD-1AVER mode d'emploi

(1)
  • Operation Guide 3202
    1
    Congratulations upon your selection of this CASIO watch.
    Applications
    The built-in sensors of this watch measure barometric pressure, temperature and
    altitude. Measured values are then shown on the display. Such features make this
    watch useful when hiking, mountain climbing, or when engaging in other such outdoor
    activities.
    Warning !
    The measurement functions built into this watch are not intended for taking
    measurements that require professional or industrial precision. Values produced
    by this watch should be considered as reasonable representations only.
    Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
    damage or loss suffered by you or any third party arising through the use of
    this product or its malfunction.
    About This Manual
    Depending on the model of your watch, display text
    appears either as dark figures on a light background, or
    light figures on a dark background. All sample displays
    in this manual are shown using dark figures on a light
    background.
    Button operations are indicated using the letters shown
    in the illustration.
    Note that the product illustrations in this manual are
    intended for reference only, and so the actual product
    may appear somewhat different than depicted by an
    illustration.
    Things to check before using the watch
    1. Check the Home City and the daylight saving time (DST) setting.
    Use the procedure under “To configure Home City settings” to configure your Home
    City and daylight saving time settings.
    Important!
    Proper World Time Mode data depend on correct Home City, time, and date settings
    in the Timekeeping Mode. Make sure you configure these settings correctly.
    2. Set the current time.
    See “Configuring Current Time and Date Settings”.
    The watch is now ready for use.
    Mode Reference Guide
    Your watch has 7 “modes”. The mode you should select depends on what you want to do.
    To do this: Enter this mode:
    View the current time and date in the Home City
    Configure Home City and daylight saving time (DST) settings
    Configure time and date settings
    Timekeeping Mode
    View the barometric pressure and temperature at your
    current location
    Barometer/Thermometer
    Mode
    View the altitude at your current location
    Determine the altitude differential between two locations
    (reference point and current location)
    Altimeter Mode
    View the current time in one of 48 cities (31 time zones)
    around the globe
    World Time Mode
    Use the stopwatch to measure elapsed time Stopwatch Mode
    Use the countdown timer Countdown Timer Mode
    Set an alarm time Alarm Mode
    MO1004-EB
    Selecting a Mode
    The illustration below shows which buttons you need to press to navigate between
    modes.
    In any mode (except when a setting screen, with flashing digits is on the display),
    press
    B
    to illuminate the display.
    World Time
    Mode
    Barometer/
    Thermometer Mode
    Stopwatch Mode
    Countdown
    Timer Mode
    Alarm Mode
    Altimeter Mode
    Timekeeping Mode
    World Time
    Mode
    Barometer/
    Thermometer Mode
    Stopwatch Mode
    Countdown
    Timer Mode
    Alarm Mode
    Altimeter Mode
    Timekeeping Mode
    General Functions (All Modes)
    The functions and operations described in this section can be used in all of the modes.
    Auto Return Features
    The watch returns to the Timekeeping Mode automatically if you do not perform any
    button operation for two or three minutes in the Alarm Mode.
    The watch will return to the Timekeeping Mode automatically if you do not perform
    any operation for about one hour after entering the Barometer/Thermometer Mode.
    If you leave a setting screen with flashing digits on the display for two or three minutes
    without performing any operation, the watch exits the setting screen automatically.
    Initial Screens
    When you enter the World Time Mode or Alarm Mode, the data you were viewing
    when you last exited the mode appears first.
    Scrolling
    The
    B
    and
    D
    buttons are used on the setting screen to scroll through data on the
    display. In most cases, holding down these buttons during a scroll operation scrolls
    through the data at high speed.
    Timekeeping
    Use the Timekeeping Mode to set and view the current
    time and date.
    In the Timekeeping Mode, the graphic in the center of
    the display indicates the passage of seconds.
    PM
    indicator
    Day of
    week
    Month
    Day
    Seconds
    Graphi
    c
    Hour : Minutes
    PM
    indicator
    Day of
    week
    Month
    Day
    Seconds
    Graphi
    c
    Hour : Minutes
    Configuring Home City Settings
    There are two Home City settings: actually selecting the Home City and selecting
    either standard time or daylight saving time (DST).
    To configure Home City settings
    1. In the Timekeeping Mode, hold down
    A
    until the
    currently selected city code (Home City) starts to flash.
    This is the city code setting screen.
    Before the city code starts to flash, the message
    SET Hold will appear on the display. Keep
    A
    depressed until SET Hold disappears and the city
    code starts to flash.
    The watch will exit the setting mode automatically if
    you do not perform any operation for about two or
    three minutes.
    For details about city codes, see the “City Code
    Table”.
    2. Press
    D
    (East) and
    B
    (West) to select the city code
    you want to use as your Home City.
    Keep pressing
    D
    or
    B
    until the city code you want
    to select as your Home City appears on the display.
    3. Press
    C
    to display the DST setting screen.
    4.
    Press
    D
    to toggle between Daylight Saving Time (On)
    and Standard Time (OFF).
    Note that you cannot switch between standard
    time and daylight saving time (DST) while UTC is
    selected as your Home City.
    5.
    After all the settings are the way you want, press
    A
    to return to the Timekeeping Mode.
    The DST indicator appears to indicate that Daylight Saving Time is turned on.
    Note
    After you specify a city code, the watch will use UTC* offsets in the World Time
    Mode to calculate the current time for other time zones based on the current
    time in your Home City.
    * Coordinated Universal Time, the world-wide scientific standard of timekeeping.
    The reference point for UTC is Greenwich, England.
    PM
    indicator
    City
    code
    Second
    s
    Hour : Minutes
    PM
    indicator
    City
    code
    Second
    s
    Hour : Minutes
    Setting
    DST indicator
    Setting
    DST indicator
Casio SGW-300HD-1AVER

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le SGW-300HD-1AVER de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du SGW-300HD-1AVER de la marque Casio de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Casio SGW-300HD-1AVER ici. Ce manuel appartient à la catégorie Montres et a été évalué par 1 personnes avec une moyenne de 9.7. Ce manuel est disponible dans les langues suivantes: Engels. Vous avez une question sur le SGW-300HD-1AVER de la marque Casio ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du SGW-300HD-1AVER de la marque Casio

Généralités
Marque Casio
Modèle SGW-300HD-1AVER
Produit Montre
EAN 4971850474197
Langue Engels
Type de fichier PDF
Détails techniques
Appareil de chronometrage Oui
Fonction heure internationale Oui
Fonction 1/1min - 24h
Fonction Alarme Oui
Calendrier Oui
Rétroéclairage à LED Oui
Précision ±30 sec/mois
Altimètre Oui
Baromètre Oui
Thermomètre Oui
Mode horloge 12h/24h
Profondeur de l’étanchéité 100 m
Design
Matériau du boîtier de montre Résine
Matière de la bande Acier inoxydable
Puissance
Type de batterie CR2016
Autonomie batterie 3 année(s)
Nombre de batteries prises en charge 1
Autres caractéristiques
Dimensions (LxPxH) 50 x 14.1 x 49.2 mm
Poids et dimensions
Poids 101 g

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Casio SGW-300HD-1AVER.

Votre question n'est pas dans la liste ? Posez votre question ici

ModesdEmploi.fr

Vous cherchez un manuel ? ModesdEmploi.fr vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

ModesdEmploi.fr

© Copyright 2021 ModesdEmploi.fr. Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.