Chief RSMA196 mode d'emploi
INSTALLATION INSTRUCTIONSMilestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makesno claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or useof this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed orimplied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.Chief Manufacturing, a products division of Milestone AV Technologies8401 Eagle Creek Parkway, Savage, MN 55378• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.69188802-000265 RevB©2009 Milestone AV Technologies,a Duchossois Group Company05/09SSB-196, SSM-196, SLB-196 and SLM-196 Interface BracketsSSB-196, SSM-196, SLB-196 and SLM-196 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specificinstallation instructions provided with the mount for additional installation information.Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY ANDDAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!Installation InstructionsWARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY ANDDAMAGE TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.2. Turn projector upside down on a flat surface.3. Place 1/2" nylon spacers over the threaded inserts in the bottom of the projector.4. Place the interface bracket onto the 1/2" nylon spacers on the bottom of the projector and align the mounting holes in the bracket with thenylon spacers.5. Place and screw M4 x 20mm pan head screws with M4 washers into the side holes and the M4 x 20mm flat head screw into the countersink hole. Tighten all fasteners at this time, securing the bracket to the projector.NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in theAll-Points Security Kit.Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.(1) Interface Bracket (2) Screw, Phillips Pan Head, M4 x 20mm(4) 10-24 Thumb Nuts ** (1) Screw, Phillips Flat Head, M4 x 20mm(1) All-Points Security Kit (2) Washer, Flat , M4(3) Spacer, Nylon, 1/2" x .194 x 1/2"**Only used when installing SLB/SSB interface brackets.NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in theencircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-styleinterface bracket installation.SLB-196 SLM-196Towards front ofprojectorTowards front ofprojector(Note: SSB-style interface bracket connectionsareencircled)(Note: SSM-style interface bracketconnectionsare encircled)
Besoin d’aide?
Nombre de questions : 0Vous avez une question sur le RSMA196 de la marque Chief ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du RSMA196 de la marque Chief de répondre correctement à votre question.
À propos de Chief RSMA196
Consultez gratuitement le manuel de la marque Chief RSMA196 ici. Ce manuel appartient à la catégorie Supports écran plat et a été évalué par 1 personnes avec une moyenne de 9.7. Ce manuel est disponible dans les langues suivantes: Engels. Vous avez une question sur le RSMA196 de la marque Chief ou avez-vous besoin d’aide? Posez votre question ici
Spécifications du RSMA196 de la marque Chief
Généralités
| Marque | Chief |
| Modèle | RSMA196 |
| Produit | Support écran plat |
| EAN | 841872132242, 8418721322424 |
| Langue | Engels |
| Type de fichier |
représentation / réalisation
| Type de montage | Plafond |
| Capacité de charge maximale | - kg |
| Couleur du produit | Noir |
