Fujifilm Instax Mini 9

Fujifilm Instax Mini 9 mode d'emploi

(2)
  • CPL10B112-100
    Parts Name
    1
    Film ejection slot
    11
    Brightness adjustment dial
    2
    Light sensor
    12
    Power button
    3
    Flash lampface
    13
    Flash charging lamp
    4
    Viewfinder
    14
    Back cover lock
    5
    Shutter button
    15
    Film pack confirmation window
    6
    Lens/Lens cover
    16
    Back cover
    7
    Self-portrait mirror
    17
    Film counter
    8
    Lens barrel
    18
    Eyepiece
    9
    Strap hook
    19
    Battery lid
    10
    Brightness indicator
    20
    Tabs (Back)
    Inserting Batteries
    3
    2
    1
    Push up the battery lid lock, then slide
    o the battery cover.
    Insert two AA batteries matching the
    C
    and
    D
    polarities.
    Slide on the battery lid to close.
    Loading the INSTAX mini Film Pack
    1
    Press down the back cover lock
    to open the back cover.
    Hold both sides of the  lm pack, align the
    yellow marks on the camera and the  lm pack
    as indicated on the INSTAX mini  lm pack
    instructions, then insert it straight.
    2
    3
    Close the back cover until the back
    cover lock clicks into place.
    [IMPORTANT] Taking Pictures
    Press the power button to turn the camera on.
    The  ash charging lamp on the left of the eyepiece
    starts blinking. (Indicates the  ash is charging.)
    You cannot take a photo while the lamp is blinking.
    When the  lm has been ejected
    (the camera stops making a sound),
    grasp the edge of the  lm, then take
    it out.
    3
    4
    When you have  nished taking a
    photo, push the lens barrel to turn
    the camera o .
    1
    Turn the camera toward the subject, then turn
    the brightness adjustment dial to move to the
    position (
    / / / ) where the lamp is lit.
    SPECIFICATIONS
    Every time you take a photo, the number
    on the  lm counter decreases from “10” to
    re ect the number of remaining photos,
    and “0“ is displayed when you have used up
    the  lm pack.
    5
    6
    You can photograph objects close-up, and can photograph yourself using the self-portrait mirror.
    Attach the left tab on the back to the left
    of the lens (
    1
    ), then attach the right tab
    (
    2
    ) so that it clicks into place.
    Hold the camera so that the O” mark
    in the view nder is on the upper right
    of the center of the subject (see the
    illustration above), then take a photo.
    Lift up the right side of the close-up lens
    supporting the left side (
    1
    ), then detach
    it (
    2
    ).
    WARNING
    Do not look through the close-up lens at the sun or other strong light. Blindness or vision problems could result.
    Caution
    Do not leave the close-up lens in places exposed to strong sunlight. Personal injury or  re could result if the lens should
    accidentally concentrate the sunbeams on an object or a person.
    • Switch o the camera before you attach/detach the close-up lens.
    Never turn the close-up lens when you attach/detach it; otherwise, the tabs on the back may be broken.
    Hold the camera securely
    keeping 35 cm to 50 cm
    between you and the edge
    of the lens.
    Con rm the composition using
    the self-portrait mirror, then take
    a photo.
    Caution
    Use new alkaline batteries of the same brand/type only (AA only).
    Do not use any batteries other than alkaline batteries.
    Replace both batteries in the following cases:
    - When the red lamp on view nder lights
    - When no lamp lights or blinks even though the power is turned on
    About 100 pictures (roughly 10 packs of INSTAX mini  lm) can be taken with new batteries.
    The battery performance may be reduced when it is cold. In this case, warm up the batteries to room temperature
    before using this camera.
    Use the supplied batteries for validation.
    Caution
    Make sure that the batteries are installed before loading the  lm pack.
    Avoid direct sunlight when loading the  lm pack.
    Do not use any  lm other than FUJIFILM INSTAX mini  lm.
    When you load the  lm pack, never press the two rectangular holes on the back.
    Do not open the back cover until you have used up the  lm; otherwise, the rest of the  lm is exposed and turns
    white. The  lm can no longer be used.
    Never use a  lm pack beyond its shelf life; otherwise, it may damage the camera.
    For details, refer to the instructions and warnings on FUJIFILM INSTAX mini  lm.
    Hold the camera, con rm the desired composition of the  nal image,
    then press the shutter button.
    Keep a distance from the subject of at least 0.6 m. The  ash has an
    e ective range of between 0.6 m and 2.7m.
    The subject will be out of focus using the regular lens if the
    distance is less than 0.6 m. Use the close-up lens for short-distance
    photography. Using it enables you to photograph the subject
    between 35 cm and 50 cm.
    In short-distance photography (including photography using the
    provided close-up lens), the center of the subject in the view nder
    will be on the upper right on the actual print.
    Caution on holding the camera
    For horizontal image, hold the camera with the  ash lampface at the top.
    Do not take pictures where  ash photography is forbidden.
    Be careful so that your  ngers or the strap do not cover the light sensor,  ash lampface,  ash, lens, or  lm ejection
    slot.
    Do not grasp the lens barrel when positioning the camera; otherwise, the  nished print may not look as expected.
    Look into the view nder so that the “O” mark appears in the center.
    Be careful not to touch the lens surface when you press the shutter button.
    Using the Close-Up Lens
    1
    2
    3
    3
    4
    2
    5
    6
    8
    9
    10
    11
    17
    19
    14
    15
    12
    13
    1
    18
    16
    9
    7
    Front
    20
    When “0” is displayed on the  lm counter, unload the  lm pack following the procedure below and as indicated on the INSTAX
    mini  lm pack instructions.
    Unloading the INSTAX mini  lm pack
    Press down the back cover lock to
    open the back cover.
    Grasp the rectangular holes on the  lm pack, then pull
    it out straight.
    1
    2
    Rear
    Close-up lens
    Vertical image Horizontal image
    Taking self-portraits
    Film FUJIFILM INSTAX mini film
    Picture Size 62 mm × 46 mm
    Lens 2 components, 2 elements, f=60 mm, 1:12.7
    View nder Real
    image finder 0.37× with target spot
    Shooting range 0.6 m and beyond
    Shutter Speed 1/60 sec.
    Exposure Control Manual switching system (LED indicator in exposure meter)
    Film Feeding Out Automatic
    Film Developing Time Approximately 90 seconds (Varies depending on the ambient temperature)
    Flash
    Constant firing flash (automatic light adjustment) Recycle time: 0.2 sec. to 6 sec.
    (when using new batteries) Effective flash range: 0.6 m – 2.7 m
    Power Supply
    Two AA-size 1.5V alkaline batteries Capacity: 100 shots
    (Approximately 10 INSTAX mini 10-pack film packs with new AA batteries)
    Auto power o time 5 min.
    Others Exposure counter (number of unexposed films), film pack confirmation window
    Dimensions 116 mm × 118.3 mm × 68.2 mm
    Weight 307 g (without batteries, strap and film pack)
    * Speci cations are subject to change without notice.
    TROUBLE SHOOTING
    During operation
    Problems Possible Causes Solutions
    The shutter release won’t
    trip.
    1 The battery power is low.
    2 The batteries are not loaded
    correctly.
    3 Power is not turned on.
    4 Camera has remained idle for
    roughly 5 minutes with the
    power turned on.
    1 Replace the batteries with new ones.
    2 Load the batteries correctly.
    3 Press the power button to turn on the power.
    4 Press the power button after retracting the lens or press the
    shutter release button to restore the power-on state.
    The lamp on the view
    nder blinks and the
    shutter release won’t trip.
    Flash is charging.
    Wait until the lamp on the brightness adjustment dial is lit
    without blinking.
    The  lm pack won’t load
    into your camera, or won’t
    load into your camera
    smoothly.
    1 The lm pack is not for your
    camera.
    2 You are not loading the  lm
    pack correctly.
    1 Use FUJIFILM INSTAX mini  lm only. (No other  lms can be
    used.)
    2 Match the yellow line on the  lm pack with the yellow
    positioning mark in your camera. Follow the INSTAX mini
    lm pack instructions.
    All lamps on the
    brightness adjustment
    dial blink at the same
    time.
    1 The battery power is low, and
    it takes a long time to charge
    the  ash.
    2 A more signi cant issue with
    your camera has occurred.
    Replace the batteries with new ones while the power is
    turned on (when the lens is extended).
    IMPORTANT:
    Replace the batteries only while the power is turned on.
    If you replace the batteries while the power is turned o
    (when the lens is retracted), the lamps on the brightness
    adjustment dial blink after turning on the power even with
    new batteries.
    * When the problem is due to reason 1, the lamps on the
    brightness adjustment dial turn o after replacing the
    batteries.
    If the problem is due to reason 2, the lamps on the
    brightness adjustment dial blink even after replacing the
    batteries. In this case, turn o the power and remove the
    batteries immediately, then contact an authorized FUJIFILM
    repair center.
    The red lamp on the view
    nder lights up.
    The battery power is low. Replace the batteries with new ones.
    Printed pictures
    Problems Possible Causes Solutions
    The  nished print looks
    over exposed. (White in
    color)
    1 The method of measuring
    the subject brightness is
    unsuitable.
    2 Brightness adjustment dial
    setting is incorrect.
    3 The ambient temperature is
    low (below +5°C/+41°F).
    4 The background is too dark in
    comparison with the subject.
    5 The light sensor or  ash sensor
    window is blocked.
    1 Point the lens toward the center of the subject and
    measure the subject brightness.
    2 While pointing the lens toward the subject, turn the
    brightness adjustment dial to set the brightness to that for
    which the lamp lights.
    3 Before taking pictures, place your camera in a warm place
    to bring it to room temperature.
    4 Turn the brightness adjustment dial one step toward the
    direction.
    5 When taking a picture, be careful not to cover the two small
    windows next to the  ash on the camera.
    The  nished print looks
    under exposed. (Dark)
    1 The method of measuring
    the subject brightness is
    unsuitable.
    2 Brightness adjustment dial
    setting is incorrect.
    3 The ambient temperature is
    high (above +40°C/+104°F).
    4 The picture was taken with
    direct light in front of you.
    5 The ash lampface was
    blocked.
    6 The background is too bright
    in comparison with the
    subject.
    7 The ash did not reach the
    subject.
    8 The ash re ected back from a
    mirror or window glass.
    9 Grasping the lens barrel
    did not let the shutter work
    properly.
    1 Point the lens toward the center of the subject and
    measure the subject brightness.
    2 While pointing the lens toward the subject, turn the
    brightness adjustment dial to set the brightness to that for
    which the brightness adjustment dial lamp lights.
    3 Before taking pictures, place your camera in a cool place.
    When the picture comes out from your camera, keep
    it away from places or objects with excessively high
    temperature.
    4 Take a picture with the light behind you, or turn the
    brightness adjustment dial one step toward the
    direction.
    5 When holding your camera, be careful not to block the
    ash lampface with your  nger or strap.
    6 Turn the brightness adjustment dial one step toward the
    direction.
    7 Take pictures within 0.6 m to 2.7 m from the subject.
    8 Adjust your position in taking the picture away from the
    mirror or window glass.
    9 Do not grasp the lens barrel when you take pictures.
    The picture is out of focus.
    1 The shooting range is too close
    to the subject.
    2 The lens is not clean.
    3 Your camera was shaken when
    taking pictures.
    1 Take pictures with a distance of at least 0.6 m between you
    and your subject.
    2 Clean the lens.
    3 Hold your camera  rmly and press the shutter release
    button gently.
    The picture is blurred.
    1
    Picture was not permitted to
    develop without touching,
    pressure being applied or other
    interference once it ejected
    from the camera.
    2 The picture did not come out
    smoothly.
    1 Do not press onto or fold the picture.
    2 Do not block the  lm exit with your  nger.
    The subject in the
    view nder has shifted in
    nished print.
    The shooting range is too close
    to the subject.
    Take pictures with a distance of at least 0.6 m between you
    and your subject.
    IMPORTANT SAFETY NOTICE
    This product has been designed with safety in mind, and to provide safe service when handled correctly and in ac-
    cordance with the User’s Guide and instructions. It is important that both the product and the INSTAX  lm are handled
    properly and used only to take pictures as instructed in this User’s Guide and in the INSTAX mini  lm instructions. For
    your ease and safety, please follow what is written in this User’s Guide. It is also a good idea to keep this User’s Guide in a
    safe, easy to  nd place where you can refer to it if needed.
    WARNING
    This symbol indicates danger, which could result in injury or death. Please follow these instructions.
    WARNING
    Never attempt to take this product apart. There is a danger of an electric shock.
    If this product is dropped or damaged so that the inside is showing, do not touch it. There is danger of an electric shock.
    If the camera or the batteries inside become hot, begin to smoke, make a burning smell or show any sign of unusual condition,
    remove the batteries right away. Use gloves to keep from burning your hands. Not removing batteries could result in burns or  re.
    Using a  ash too close to a person’s eyes may for the short term a ect the eyesight. Take care when taking picture of infants
    and young children.
    If your camera gets wet or if something such as pieces of metal get inside, remove the batteries right away to avoid heat
    buildup or a  re starting inside the camera.
    Do not use this camera in places where there is  ammable gas or near open gasoline, benzene, paint thinner or other
    unstable substances which can give o dangerous vapors. Doing so could result in explosion or  re.
    Store your camera out of the reach of infants and young children. Failure to do this could result in serious injury. (For
    example, the strap could become wrapped around a child’s neck and cause choking.)
    Never take apart the batteries. Do not subject them to heat, throw them into an open  re, or attempt to short-circuit them.
    Doing so could result in the batteries exploding or splitting open causing burns or  re.
    Only use speci ed batteries in this product. Use of incorrect type of batteries could cause explosion. Dispose of used
    batteries according to battery disposal instructions.
    Make sure batteries are stored in a safe, secure place and well out of the reach of any infants, young children or pets. Improper
    storage could result in a child swallowing a battery. (If a child swallows a battery, call a doctor or a hospital right away.)
    Do not look through the close-up lens at the sun or other strong light. Blindness or vision problems could result.
    Never get this product wet or handle it with wet hands. Doing so may result in an electric shock.
    Never take  ash photographs of people riding bicycles, driving cars or riding a horse. The  ash can distract the driver and
    frighten the animal, possibly causing an accident.
    Make sure that the battery C and D polarities are installed correctly in the camera. A damaged battery or electrolyte
    leakage may cause a  re, injury, and contaminate the environment.
    Do not touch moving parts inside the camera. You may be injured.
    When using the camera, make sure that the battery cover is attached; otherwise, you may be injured.
    Do not leave the close-up lens in places exposed to strong sunlight. Personal injury or  re could result if the lens should
    accidentally concentrate the sunbeams on an object or a person.
    Do not swing around the camera. You may be injured.
    The “CE” mark certi es that this product satis es the requirements of the EU (European Union) regarding safety,
    public health, environment and consumer protection. (“CE” is the abbreviation of Conformité Européenne.)
    This product is in conformity with Directive 89/336/EEC.
    For customers in Turkey:
    EEE Complies with Directive.
    For customers in the USA:
    FCC Statement
    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
    not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
    undesired operation.
    CAUTION
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
    Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
    equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
    tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
    a particular installation. If this equipment does cause harmful interference to radio or television, which can be determined by turn-
    ing the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    •Reorient or relocate the receiving antenna
    •Increase the separation between the equipment and receiver
    •Connect the equipment into an outlet on a circuit di erent from that to which the receiver id connected
    •Consult the dealer or an experienced radio/TV technician for help
    Changes or modi cations not expressly approved by FUJIFILM responsible for compliance could void the user’s authority to oper-
    ate the equipment.
    For customers in Canada:
    CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
    Disposal of Electric and Electronic Equipment in Private Households
    Disposal of used Electrical & Electronic Equipment
    (Applicable in the European Union and other European countries with separate collection systems)
    This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be
    treated as household waste.
    Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
    By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and
    human health, which could otherwise be caused by inappropriate waste handling of this product.
    If your equipment contains easy removable batteries or accumulators, please dispose these separately according to your local
    requirements.
    The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please
    contact your local city o ce, your household waste disposal service or the shop where you have purchased the product.
    In Countries outside of EU: If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
    COMMON SENSE CAMERA CARE
    CAMERA CARE
    1 Your camera is a precision instrument. Do not get it wet or drop it. Also, do not expose to sand.
    2 Do not use a strap made for cellular phones or other similar electronic products. These straps are usually too weak to hold your
    camera securely. For safety, use only straps designed for your camera, and use only as speci cally intended and instructed.
    3 If you are not using your camera for a long interval, unload the batteries and keep it where it will be safe from heat, dust, and
    moisture.
    4 Remove soil and dust from the lens, view nder window, etc. with an air blower and by wiping lightly with a piece of soft cloth.
    5 Do not use solvent such as thinner and alcohol to remove soil.
    6 Keep the  lm chamber and camera interior clean to avoid damaging  lms.
    7 In hot weather, do not leave your camera in a closed car or on the beach, and do not leave it in moist places.
    8 Moth repellent gas such as naphthalene adversely a ects your camera and  lms. Avoid keeping your camera or  lms in a chest
    with mothballs.
    9
    Your camera is computer-controlled. If you should experience an operational issue, remove the batteries and then reload them
    .
    0 Note that the temperature range within which your camera can be used is +5°C/+41°F to +40°C/+104°F.
    INSTAX mini FILM AND PRINT CARE
    See FUJIFILM INSTAX mini  lm for  lm use instructions. Follow all instructions for safe and proper use.
    1
    Keep the  lm in a cool and dry place. Do not leave the  lm in a place where the temperature is extremely high (e.g., in a closed car).
    2
    When you load a  lm pack, use the  lm as soon as possible.
    3
    If the  lm has been kept in a place where the temperature is extremely high or low, bring it to room temperature before start-
    ing to take pictures.
    4
    Be sure to use the  lm before the expiration or “Use Before” date.
    5
    Avoid airport checked luggage inspection and other strong X-ray illumination. The e ect of fogging, etc. may appear on un-
    used  lm. We recommend that you carry the camera and/or the  lm onto the aircraft as carry-on luggage. (Check with each
    airport for more information).
    6
    Avoiding strong light, keep the developed prints in a cool and dry place.
    7
    Do not puncture, tear, or cut INSTAX mini  lm. If  lm becomes damaged, do not use.
    Cautions on handling the  lm and prints
    For details, refer to the instructions and warnings on FUJIFILM INSTAX mini  lm.
    Information for traceability in Europe
    Manufacturer: FUJIFILM Corporation
    Address, City: 7-3, Akasaka 9-Chome, Minato-ku, Tokyo
    Country: JAPAN
    Authorized representative in Europe: FUJIFILM EUROPE GMBH
    Address, City: Dusseldorf Heesenstrasse 31, 40549
    Country: Germany
    Information for FUJIFILM in Canada
    FUJIFILM Canada Inc.
    600 Suffolk Court, Mississauga, Ontario L5R 4G4
    Information for FUJIFILM in the United States
    FUJIFILM North America Corp.
    200 Summit Lake Drive
    Valhalla, New York 10595, USA
    4
    Press the power button to
    turn the camera on.
    The  ash charging lamp on
    the left of the eyepiece starts
    blinking. (Indicates the  ash is
    charging.)
    5
    When you press the shutter button, the
    lm cover (black) is ejected, and the  lm
    counter display on the back changes from
    “S” to “10”.
    After the  lm cover has been ejected
    (the camera stops making a sound),
    grasp the edge of the  lm, then take it
    out.
    Your camera is now ready to take a
    photo.
    6
    [IMPORTANT] Taking a lighter (Hi-Key) picture
    Position at which the lamp lights
    Position to set the dial for a lighter (Hi-
    Key) picture
    This camera automatically determines an appropriate brightness for taking any given picture, and informs you by lighting the
    corresponding lamp.
    To take a lighter (Hi-key) picture, set the position of the brightness adjustment dial to the position of the mode darker than the
    mode for which the lamp on the dial lights.
    Caution
    Do not use the (Hi-key) function outside; otherwise, the picture may be much
    lighter (whiter) than you intend.
    2
    BO-1_rev_sheet_ENFR.indd 1BO-1_rev_sheet_ENFR.indd 1 2017/1/5 11:40:102017/1/5 11:40:10
Fujifilm Instax Mini 9

Besoin d’aide?

Nombre de questions : 1

Vous avez une question sur le Instax Mini 9 de la marque Fujifilm ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du Instax Mini 9 de la marque Fujifilm de répondre correctement à votre question.

marion, 2019-12-10 10:51:01 Pas de commentaire

Bonjour mon Instax mini 9 clignote orange, alors que j'ai changé les piles et les recharges de pellicules à deux reprises et qu'aucune pellicule n'est coincée dedans .. Que dois-je faire?

Répondez à cette question

Consultez gratuitement le manuel de la marque Fujifilm Instax Mini 9 ici. Ce manuel appartient à la catégorie Appareils photo instantané et a été évalué par 2 personnes avec une moyenne de 8.7. Ce manuel est disponible dans les langues suivantes: Français, Anglais. Vous avez une question sur le Instax Mini 9 de la marque Fujifilm ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du Instax Mini 9 de la marque Fujifilm

Généralités
Marque Fujifilm
Modèle Instax Mini 9
Produit Appareil photo instantané
EAN 4547410349450
Langue Français, Anglais
Type de fichier PDF
Détails techniques
Format de l'image 62 x 46
Couleur du produit Blanc
Zone de Mise au point, normal 0.6 - ∞
Puissance
Nombre de batteries prises en charge 2
Taille de batterie cylindrique AA
Tension des piles 1.5
 indication   
Voyants
Poids et dimensions
Poids 307
Hauteur 118.3
Profondeur 68.2
Largeur 116
Flash
Flash intégré
Portée du flash 0.6 - 2.7
Temps de recharge du flash -
Obturateur
Vitesse maximale d'obturation de la caméra 1/60
Vitesse minimale d'obturation de la caméra -
Contenu de l'emballage
Carte de garantie
Guide d'utilisation

ModesdEmploi.fr

Vous cherchez un manuel ? ModesdEmploi.fr vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

ModesdEmploi.fr

© Copyright 2020 ModesdEmploi.fr. Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.

En savoir plus