Hikvision DS-2CE56D1T-VPIR mode d'emploi

Hikvision DS-2CE56D1T-VPIR
  • N. d. pages: 2
  • Type de fichier: PDF
TVI Dome Camera
User Manual
Regulatory InformationFCC Information
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
1. This device may not cause harmful
2. This device must accept any interference
received, including interference that may
cause undesired operation.
EU Conformity Statement
upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see:
2006/66/EC (battery directive):This
product contains a battery that cannot
be disposed of as unsorted municipal
waste in the European Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see: www.recyclethis.info.
2012/19/EU (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC,
the RoHS Directive 2011/65/EU.


This series of camera adopts new generation
sensor with high sensitivity and advanced circuit
design technology It features high resolution,.
low image distortion and low noise, etc , which.
makes it suitable for surveillance system and
image processing system.
l High performance CMOS sensor and high
resolution bring high-quality image;
l Low illumination;
l OSD menu, parameters are configurable;
l Support auto white balance, auto gain control,
Support image effect adjustment;
Unit transmission control;
l Advanced 3-axis design meets different
installation requirements.

1 Introduction

1.1 Product Features1.2 Overview1.2.1 Overview of Type I Camera1.2.2 Overview of Type Camera

2 Installation

Before you start:
l Please make sure that the device in the package
is in good condition and all the assembly parts
are included.
l Make sure that all the related equipment is
power-off during the installation.
l Check the specification of the products for the
installation environment.
l Check whether the power supply is matched
with your power output to avoid damage.
l Please make sure the wall is strong enough to
withstand three times the weight of the camera
and the mounting.
l If the wall is the cement wall, you need to insert
expansion screws before you install the camera.
If the wall is the wooden wall, you can use
self-tapping screw to secure the camera.
l If the product does not function properly,
please contact your dealer or the nearest
service center. Do not disassemble the camera
for repair or maintenance by yourself.
2.1 Installation of Type CameraI
2.Drill the screw holes and cable hole according to
the drill template.
Figure 2-2 The Drill Template
Screw Hole
BubbleVideo CablePower CableAdjustment ScrewCameraBlack Liner
Moungting Base
Adjustment Screw
Black Liner
Safety Rope
1.Pry the snap joint up to remove the bubble
and the black liner.
Cable Hole
Snap Joint
Figure 2-1 Remove the Bubble
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual applies to
This manual may contain several technical
incorrect places or printing errors, and the
content is subject to change without notice.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
Please refer to the product specification for
camera parameters and functions.
Privacy Notice
Surveillance laws vary by jurisdiction. Check
all relevant laws in your jurisdiction before using
this product for surveillance purposes to ensure
that your use of this product conforms.
Hikvision DS-2CE56D1T-VPIR

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le DS-2CE56D1T-VPIR de la marque Hikvision ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du DS-2CE56D1T-VPIR de la marque Hikvision de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Hikvision DS-2CE56D1T-VPIR ici. Ce manuel appartient à la catégorie Caméras de surveillance et a été évalué par 1 personnes avec une moyenne de 8.5. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le DS-2CE56D1T-VPIR de la marque Hikvision ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du DS-2CE56D1T-VPIR de la marque Hikvision

Marque Hikvision
Modèle DS-2CE56D1T-VPIR
Produit caméra de surveillance
Langue Anglais
Type de fichier PDF
Détecteur d'image
Type de capteur CMOS
Total des megapixels 2 MP
Résolution maximale 1920 x 1080 pixels
Réduction du bruit Oui
Résolutions graphiques prises en charge 1920 x 1080 (HD 1080)
Modes vidéo pris en charge 1080p
Full HD Oui
Nombre d'images par seconde 30 ips
Système de format du signal analogique NTSC
Contrôle automatique du gain Oui
Illumination minimum 0 lux
Type obturateur de la caméra Électronique
Vitesse d'obturation de l'appareil photo 1/30 - 1/50000 s
point de vue angle (FOV) 80 °
Panoramique 0 - 355 °
Angle d'inclinaison 0 - 75 °
Angle de rotation 355 °
Balance des blancs Auto,Manual
Système d'objectif
Focale Fixe - mm
Nombre maximum d'ouverture 2.2
représentation / réalisation
mode Jour/Nuit Oui
Technologie de connectivité Avec fil
Type Caméra de sécurité CCTV
Installation prise en charge Extérieure
Rapport signal-sur-bruit 52 dB
Conditions environnementales
Température d'opération -40 - 60 °C
Humidité relative de fonctionnement (H-H) 0 - 90 %
Connexion Ethernet, supportant l'alimentation via ce port (PoE) Non
Sortie CC en volts 12
Consommation (max) 3 W
vision de nuit
Vision nocturne Oui
Distance de vision nocturne 20 m
Type de LED IR
Poids et dimensions
Diamètre 111 mm
Hauteur 82.4 mm
Poids 550 g
Fonctions de protection Anti-vandalisme
Format Dôme
Couleur du produit Blanc
Type de montage Plafond
Sortie composante 1
Support de stockage
Disque dur intégré Non
Ethernet/LAN Non
Wifi Non
Contenu de l'emballage
nombre de caméras 1
voir plus

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Hikvision DS-2CE56D1T-VPIR.

Votre question n'est pas dans la liste ? Posez votre question ici