La Crosse Technology 308-145

La Crosse Technology 308-145 mode d'emploi

(1)
  • INTRODUCTION:
    The Wireless Color Weather Station features radio-controlled time, weather
    forecast, indoor and outdoor temperature/humidity as well as heat index and dew
    point, on a stylish, colorful, and easy to read display. Use the integrated USB
    charging port to charge your devices when the Weather Station is plugged into a
    power outlet.
    WIRELESS COLOR WEATHER STATION:
    SETUP INSTRUCTIONS STEP BY STEP:
    STEP 1: (optional battery operation)
    Remove battery cover from the Weather Station: Slide tab to right and pull out to
    remove the cover.
    Insert 3 NEW AA batteries (not included) into the back of the Weather Station.
    Observe the correct polarity (see marking inside the battery compartment).Do
    NOT mix old and new batteries.
    The Weather Station will light up and
    show, indoor temperature, humidity and
    channel 1.
    STEP 2:
    Insert the 5-volt a/c power adapter into
    the designated area on the back of the
    Weather Station.
    Plug the a/c power adapter into a wall
    outlet for continuous backlight
    (ON/OFF), and dimmer feature. (Backlight will illuminate for 8 seconds when using
    only battery power with a press/release of the SNOOZE/LIGHT button.)
    IMPORTANT: When operating on a/c power, to avoid interference, the backlight
    will turn off while the Weather Station searches for the WWVB signal. The
    backlight returns after a 2-10 minute search.
    STEP 3:
    Ensure that the transmitter is within 10
    feet of the Weather Station.
    Remove battery cover from transmitter:
    Slide the battery cover down and lift off
    the back.
    Insert 2 NEW AA batteries into the
    TX14TH-LCD-G transmitter. Observe
    the correct polarity.
    The temperature, humidity and channel
    will be displayed on the LCD of the transmitter.
    Press the °C/°F button on the transmitter to switch from Fahrenheit to Celsius.
    The CH switch is set to Channel 1 by default. Confirm channel 1 is selected.
    Within 3 minutes the Weather Station will beep and then show readings in the
    Outdoor temperature area on the LCD.
    Note: Use Alkaline batteries (or Lithium for temperatures below - 20°F / -28.8°C).
    TROUBLESHOOTING:
    If the Weather Station does not show the outdoor temperature after 3 minutes,
    remove the a/c power adapter and all batteries from both units and start the setup
    process again.
    If the outdoor temperature does not show up after a second attempt, please slide
    open the battery cover of the outdoor transmitter to reveal the TX button (which is
    under the °C/°F button, push down on the TX button for 3 seconds to send a
    wireless signal to the Weather Station.
    On the Weather Station, hold the CH button for 3-5 seconds to search for the
    transmitter.
    For optimal 433 MHz signal reception, the outdoor transmitter should be placed
    within 200 feet (60 meters) from the indoor Weather Station.
    POSITIONING THE WIRELESS OUTDOOR TEMP./HUMIDITY TRANSMITTER
    Once the Weather Station shows the outdoor temperature, place it and the
    transmitter in the desired locations and wait approximately 1-hour before
    permanently mounting the transmitter to ensure that there is proper reception. The
    transmitter should be mounted vertically, in a shaded, protected area, at least 6 feet
    from the ground to avoid damage and ensure accurate readings. The transmitter is
    water resistant, not waterproof and should not be placed anywhere it will become
    submerged in water or subject to standing water or snow.
    WALL MOUNT
    Choose a shaded location (under an overhang) for the transmitter that
    is within the confirmed wireless reception range of the Weather
    Station for accuracy.
    Install one mounting screw (not included) into a wall leaving
    approximately ½ of an inch (12.7mm) extended.
    Place the hanging hole (on the back of the transmitter) onto the
    mounting screw and gently slide the transmitter down to secure it.
    IMPORTANT: For true temperature and humidity readings, mount the transmitter
    out of direct sunlight on a North-facing wall or in any other well shaded area like
    under an eave or deck rail. The maximum transmitting range in open air is over 200-
    feet (60 meters). Obstacles such as walls, windows, stucco, concrete, and large
    metal objects can reduce the range. Place the transmitter at least 6 feet in the air to
    improve signal transmission.
    BUTTON FUNCTIONS:
    Button
    Press and Release
    Functions
    Hold 3-5 seconds
    SET
    Move through program menu
    Confirm setting.
    Enter program menu,
    set time, date, etc.
    ALARM
    View Alarm
    Activate/Deactivate Alarm
    Alarm set
    +/RCC
    1 step forward (setup)
    Search for WWVB
    signal Fast
    advance (setup)
    -/°C/°F
    Select temperature in °C/°F
    1 step backward (setup)
    Fast backward (setup)
    MIN/MAX
    1-time MAX values
    2-times MIN values
    Resets all MIN / MAX
    values
    HEAT/DEW
    1-time Heat Index
    2-times Dew Point
    CH
    Switch channels outdoor
    (multiple transmitters)
    Search for remote
    transmitter
    LIGHT HI/LO
    HOLD ON/OFF
    Dim backlight for night time
    Turn continuous
    backlight ON or OFF
    (a/c adapter)
    LIGHT/SNOOZE
    (top)
    Activates backlight when
    using only batteries
    Trigger snooze alarm
    PROGRAM MENU:
    The SET button will move through the program menu.
    The +/RCC or -/°C/°F button will change the value.
    WWVB ON / OFF: Hold the SET button 5 seconds and WWVB and the word ON
    will flash. Press and release the +/RCC or -/°C/°F button to turn WWVB to OFF if
    you do NOT wish to use WWVB reception (manual set time/date). Press the SET
    button to confirm and move to the next item.
    TIME ZONE: EST will flash. Press and release the +/RCC or -/°C/°F button to
    select a different Time Zone: AST=Atlantic, EST= Eastern, CST= Central, MST=
    Mountain, PST= Pacific, AKT= Alaska, HAT=Hawaiian time zone. Press the SET
    button to confirm and move to the next item.
    DAYLIGHT SAVING TIME: DST will flash and the word ON. Press and release
    the +/RCC or -/°C/°F button to turn this to OFF if you do not observe DST. Press
    the SET button to confirm and move to the next item.
    12/24 HOUR TIME: 12H will flash. Press and release the +/RCC or -/°C/°F button
    to select 24H. Press the SET button to confirm and move to the next item.
    HOUR: The hour will flash. Press and release the +/RCC or -/°C/°F button to
    select the correct hour. Press the SET button to confirm and move to the next
    item.
    MINUTES: The minutes will flash. Press and release the +/RCC or -/°C/°F button
    to select the correct minutes. Press the SET button to confirm and move to the
    next item.
    YEAR: The year will flash. Press and release the +/RCC or -/°C/°F button to
    select the correct year. Press the SET button to confirm and move to the next
    item.
    MONTH: The month will flash. Press and release the +/RCC or -/°C/°F button to
    select the correct month. Press the SET button to confirm and move to the next
    item.
    DATE: The date will flash. Press and release the +/RCC or -/°C/°F button to select
    the correct date. Press the SET button to confirm and exit the program menu
    Note: The Day of the Week will set automatically when the year, month and date
    are set.
    FAHRENHEIT/CELSIUS: Press and release the -/°C/°F button once on the
    Weather Station, to switch from Fahrenheit to Celsius.
    AUTO (channel scroll) - AUTO will appear in the outdoor temperature/humidity
    area when multiple transmitters are received and the Weather Station is set to scroll
    through the channels automatically.
    Press and release the CH button repeatedly until the word AUTO shows. The
    Weather Station will rotate through all available channels.
    Press and release the CH button once to show only one channel continually.
    The Weather Station can receive up to 3 outdoor transmitters.
    Extra TX14TH-LCD-G transmitters may be found online or at your retailer to monitor
    remote temperature and humidity of up to 3 locations within a 200 Ft wireless range
    of the Weather Station.
    Note: When only one transmitter is connected, you cannot see other channels.
    WWVB RADIO CONTROLLED TIME
    The National Institute of Standards and Technology (NIST) WWVB radio station is
    located in Ft. Collins, Colorado. It transmits the exact WWVB time signal
    continuously throughout the United States at 60 kHz. The signal can be received up
    to 2,000 miles away through the internal antenna in the Weather Station. However,
    due to the nature of the Earth’s Ionosphere, reception is very limited during daylight
    hours. The Weather Station will search for a signal every night when reception is
    best. The WWVB radio station derives its signal from the NIST Atomic Clock in
    Boulder, Colorado.
    THE WWVB RECEPTION ICON with full signal strength will appear on
    screen if the reception of the WWVB atomic time is successful.
    The tower icon is solid: The Weather Station has received the WWVB signal.
    No tower icon shows: The Weather Station was unable to receive a signal.
    Reposition the Weather Station for better signal reception or try again at bedtime.
    The Weather Station will start searching at UTC: 07:00. If there is no reception on
    the first attempt, it will try again at 08:00, 09:00, 10:00 and 11:00 for at least 2 to
    10 min.
    If the WWVB signal is strong it may establish reception in ABOUT 2-3 minutes.
    If the signal is marginal it will try to obtain a signal for up to 10 minutes.
    IMPORTANT: When operating on a/c power, to avoid interference, the backlight
    will turn off while the Weather Station searches for the WWVB signal. The
    backlight will return after the 2-10 minute search which occurs during the late night
    or early morning hours.
    Note: In case the Weather Station is not able to detect the WWVB-signal
    (disturbances, transmitting distance, etc.); the time may be manually set.
    BACKLIGHT:
    A/C adapter: The backlight is on continuously when operating the Weather Station
    with the 5-volt a/c adapter.
    HIGH: The backlight is defaulted to HI when the Adapter is in use.
    LO: Press and release the LIGHT HI/LO button to dim the backlight. Press and
    release again to return to full strength.
    Note: When the Adapter is NOT in use, the High/Lo light feature is not available.
    OFF: Hold the HOLD ON/OFF button for 5 seconds, until the station beeps, to
    turn the backlight off, to sleep.
    Wireless Color Weather Station
    Model: 308-145 | Quick Setup Guide
La Crosse Technology 308-145

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le 308-145 de la marque La Crosse Technology ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du 308-145 de la marque La Crosse Technology de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque La Crosse Technology 308-145 ici. Ce manuel appartient à la catégorie Stations météo et a été évalué par 1 personnes avec une moyenne de 9.2. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le 308-145 de la marque La Crosse Technology ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du 308-145 de la marque La Crosse Technology

Généralités
Marque La Crosse Technology
Modèle 308-145
Produit Station méteo
EAN 757456986449
Langue Anglais
Type de fichier PDF
Caractéristiques
Fonctions de mesure Indoor barometer, Indoor hygrometer, Indoor thermometer, Outdoor barometer, Outdoor hygrometer, Outdoor thermometer
Mesure affichage de la tendance fonctions Barometer, Hygrometer, Thermometer
Fonction horloge
Fonction Alarme
Station météo des données extremum Hygrometer, Thermometer
Prévisions météorologiques
Mesure du taux d'humidité (extérieure) (H-H) 1 - 99
Plage de mesure de l'humidité (à l'intérieur) (H-H) 1 - 99
Gamme de mesure: Température intérieure (T-T) 0 - 50
Gamme de mesure: Température intérieure (T-T) 32 - 122
Gamme de mesure: Température extérieure (T-T) -29 - 60
Gamme de mesure: Température extérieure (T-T) -40 - 140
Prévisions récepteur de données
Quantité de Ports USB 2.0 1
Couleur du produit Blanc
Écran
Écran integré
Puissance
Nombre de piles (récepteur) 3
Type de batterie AAA
Technologie batterie Alcaline
Poids et dimensions
Largeur 64
Profondeur 36
Hauteur 101
Dimensions du récepteur (L x P x H) 160 x 70 x 108

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de La Crosse Technology 308-145.

Votre question n'est pas dans la liste ? Posez votre question ici

ModesdEmploi.fr

Vous cherchez un manuel ? ModesdEmploi.fr vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

ModesdEmploi.fr

© Copyright 2020 ModesdEmploi.fr. Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.

En savoir plus