Moxa NPort 5130A mode d'emploi

Moxa NPort 5130A
  • N. d. pages: 2
  • Type de fichier: PDF

— 1— — 2 — — 3 —

NPort 5100A Series

Quick Installation Guide

Second Edition, June 2010

1. Overview

NPort 5100A series device servers are compact, palm-sized data
communication devices that allow you to control RS-232 (NPort 5110A),
RS-422/485 (NPort 5130A), and RS-232/422/485 (NPort 5150A) serial
devices over a TCP/IP-based Ethernet.
Note: “-T” indicates an extended temperature model.

2. Package Checklist

Before installing the NPort 5100A series device server, verify that the
package contains the following items:
y 1 NPort 5100A serial device server
y Power Adaptor (NPort 5100A-T doesn't include this accessory)
y 4 stick-on pads
y Document & Software CD
y Quick Installation Guide
y Product Warranty Statement
Optional Accessory
y DK-35A: DIN-Rail Mounting Kit (35 mm)
Notify your sales representative if any of the above items are missing or

3. Hardware Introduction

As shown in the following figures, NPort 5100A series device servers
have one male DB9 port for transmitting RS-232 (NPort 5110A),
RS-422/485 (NPort 5130A), or RS-232/422/485 (NPort 5150A) serial
Top Panel View
screw hole
screw hole
Serial Device Server
Port 1 RS-232
Male DB9 serial port
Front Panel View
RJ45 10/100M Ethernet port
Reset button
Power input
Rear Panel View
Stick-on pad
NOTE: The NPort 5110A, NPort 5130A, and NPort 5150A have the
same form factor.
Reset ButtonPress and hold the Reset button for 5 seconds to load
factory defaults: Use a pointed object, such as a straightened paper clip or
toothpick, to depress the reset button. This will cause the Ready LED to
blink on and off. The factory defaults will be loaded once the Ready LED
stops blinking (after about 5 seconds). At this point, release the reset
LED Indicators—NPort 5100A’s top panel has three LED indicators,
which are described in the following table.
LED Function
Steady on:
Power is on and the NPort is booting up.
Blinking: Indicates an IP conflict, or DHCP or
BOOTP server is not responding properly.
Steady on: Power is on and the NPort is functioning
Blinking: The NPort has been located by the NPort
Administrator’s Location function.
Off Power is off, or a power error..
10 Mbps Ethernet connection.
100 Mbps Ethernet connection.
Off Ethernet cable is disconnected.
Serial port is receiving data.
Serial port is transmitting data.
No data is being transmitted or received through the
serial port.
Adjustable pull high/low resistor for RS-422/485 (150 K or 1 K)
Jumpers are used to set the pull high/low
resistor values. The default is 150 K. Short
the jumpers to set this value to 1 K. Do not
use the 1 K setting with RS-232 mode, since
doing so will degrade the RS-232 signals and
shorten the communication distance.

4. Hardware Installation Information

STEP 1: After removing the NPort 5100A series device server from the
box, the first thing you should do is connect the power adaptor.
STEP 2: Connect the NPort 5100A series device server to a network. Use
a standard straight-through Ethernet cable to connect to a hub or switch.
When setting up or testing the NPort 5100A series device server, you
might find it convenient to connect directly to your computer’s Ethernet
port. In which case, use a cross-over Ethernet cable.
STEP 3: Connect the NPort 5100A series device server’s serial port to a
serial device.
STEP 4: Placement options.
In addition to placing the NPort 5100A on a desktop or other horizontal
surface, you may also make use of the DIN-Rail or Wall Mount options,
as illustrated below.
Wall Mount DIN-Rail
Serial Device Server
Port 1 RS-232
12-48 VDC
P/N: 1802051000021
Moxa NPort 5130A

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le NPort 5130A de la marque Moxa ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du NPort 5130A de la marque Moxa de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Moxa NPort 5130A ici. Ce manuel appartient à la catégorie Serveurs et a été évalué par 1 personnes avec une moyenne de 7.6. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le NPort 5130A de la marque Moxa ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du NPort 5130A de la marque Moxa

Marque Moxa
Modèle NPort 5130A
Produit serveur
Langue Anglais
Type de fichier PDF
Détails techniques
Nombre de ports série 1
Type d'interface série RS-422,RS-485
Isolation 1.5 kV
LAN Ethernet : taux de transfert des données 10,100 Mbit/s
Nombre de port ethernet LAN (RJ-45) 1
Poids et dimensions
Dimensions (LxPxH) 52 x 80 x 22 mm
Poids 340 g
Protocoles réseau pris en charge ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS,HTTP, SMTP, IGMP v1/2
Autres caractéristiques
Systèmes d'exploitation compatibles SCO Unix, OpenServer\nUnixWare v2.1, v7\nUnix SVR 4.2\nUnix QNX 4.25, QNX 6\nSolaris 10\nFreeBSD\nAIX 5.x\nHP-UX 11i\nMac OS v10.3\nLinux v2.4.x, v2.6.x
Caractéristiques de gestion
Protocoles de gestion SNMP v1
Conditions environnementales
Température d'opération 0 - 60 °C
Température hors fonctionnement -40 - 85 °C
Humidité relative de fonctionnement (H-H) 5 - 95 %
Tension d'entrée 12 - 48 V
Sécurité UL, LVD
Certification CE, FCC
voir plus

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Moxa NPort 5130A.

Votre question n'est pas dans la liste ? Posez votre question ici