Muse M57BT mode d'emploi

Muse M57BT
(1)
  • N. d. pages: 1
  • Type de fichier: PDF
This micro system supports Bluetooth audio function. You can play the audio le in your mobile phone
via the micro system.
1. Press SOURCE button to select Bluetooth mode. ” is displayed. Press button for 4
seconds and release the button.
2. Turn on the Bluetooth function of your mobile phone. Select the item of searching the Bluetooth
device and enter it. Your mobile phone starts to search for Bluetooth devices within range (10
meters). Select this micro system “M-55BT” and conrm it, then you are asked to input a 4-digit
password that is 0000. Enter the password and conrm it.( If you have made Bluetooth connectivity
before, a list of the previous search results is displayed. Select “M-55BT” and conrm.)
appears when pairing is successful.
3. When pairing is successful, you can control music player of your phone by pressing VOL+/-, ,
, , MUTE button on the unit.
4. Turn off the Bluetooth function of your mobile phone to do disconnection.

M-55 BT

User Manual

MICRO SYSTEM CD/MP3 WITH BLUETOOTH

Please read the instruction carefully before operating the unit.

English
GB - 5
Intro playback
Press INTRO button on remote control and “INTRO” appears on display. It will start to play the rst
10 seconds of each track. Press INTRO button again to cancel this function and “INTRO” disappears
on display.
Repeat playback
Press REPEAT button on remote control repeatedly to select a play mode:
- Repeat One : display shows “REP”.
- Repeat folder :display shows “REP ALB”. (MP3 only)
- Repeat All : display shows “REP ALL”.
To cancel repeat playback, press REPEAT button repeatedly until repeat indicator disappears.
Random playback
Press RANDOM button on remote control and “RND” appears on display. It will play all tracks in
random order. Press RANDOM button again to cancel this function and “RND” disappears.
Program playback
1. In stop mode, press PROG button on remote control. The display will show “00 P01” (“000 P01”
for MP3 ).
2. Use number buttons to input the track number and press PROG button to conform.
3. Repeat above steps to program up to 20 tracks for CD and 99 tracks for MP3.
4. Press to start program playback.
5. Press STOP on remote control once to stop the program playback. Press STOP twice to cancel
this function.
GB - 1
1. LED display2. STANDBY indicator3. Remote sensor4. STANDBY button5. PLAY/PAUSE button6. SOURCE button7. , buttons: Skip / search / Tuning8. VOL+/- buttons9. Earphone jack10. USB port11. Disc door open button12. Disc compartment13. FM antenna 14. AC cord15. Speaker terminals16. Speaker box17. Speaker wire
GB - 2
R1. STANDBY button
R2. MUTE button
R3. 0-9,10+ number buttons
R4. PROG button : To program playback sequences.
R5. ALB-/+ buttons : Folder down /up
R6. VOL-/+ buttons
R7. / /M- (MEMORY -) button:
Skip / search / Preset down
R8. / / M+ (MEMORY +) button:
Skip / search / Preset up
R9. PLAY/PAUSE button
R10. TUN-/+ buttons: Tuning
R11. CD button
R12. USB button
R13. FM button
R14. SOURCE button
R15. INTRO button
R16. REPEAT button
R17. RANDOM button
R18. AUTO/ STOP button
R19. SLEEP button
R20. EQ button
R21. MEMORY button
R22. ST/MONO button
Before throwing any batteries away, consult your distributor who may be able to take them
back for specic recycling.
REMOTE CONTROL
Installing Battery
Insert 2 “AAA/ UM4” batteries to the remote control prior to use. Make sure to match their polarities
(+/-) to the markings inside the compartment.
NOTES:
- Never recharge the batteries, apply heat to them or take them apart.
- If the remote control is not going to be used for a long time, remove the battery to avoid damage
caused by battery leakage corrosion.
- Attention should be drawn to the environmental aspects of battery disposal.
- Do not throw batteries in re!
- Battery shall not be exposed to excessive heat such as sunshine, re or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
1. Press STANDBY button to turn on the unit.
2. Open the CD door by pushing the CD door Open button .
3. Place the CD with label side up inside the CD compartment and close the CD door.
4. Press SOURCE or CD button to select CD function. After a few seconds, the total number of track
and total play time will appear on display. The “CD” icon is displayed. Playback starts automatically.
GB - 3
1. Press STANDBY button to turn on the unit.
2. The function (CD / USB / FM / BLUETOOH) is selected by pressing SOURCE button repeatedly, or
pressing CD , USB or FM button on remote control respectively.
VOLUME
Press VOL-/+ to adjust the sound to comfortable level. The volume level will be displayed for a few
seconds.
MUTE
To cut off the sound from the speakers temporarily, press MUTE button on remote control. The “MUTE”
icon is shown on the display. Press MUTE button again to cancel Mute mode and restore the sound
from the speakers.
EQ
Press EQ button on remote control to toggle among the different sound effects (FLAT / JAZZ/
CLASSIC / ROCK / POP). The selection will show on display for few seconds.
This set operates on AC 100-240V~ 50/60Hz.
Connect the power cord to a convenient AC wall outlet.
1. Insert the speaker cables by pushing down the terminal lever of the Left Speaker Terminal and the
Right Speaker Terminal.
2. Connect the speaker to Speaker Terminals, with BLACK wire to BLACK terminals and WHITE/
BLACK wire to WHITE terminals.
Example 2, to select the 25
th
track:
Method 1: Press 10+ button twice, “02-“ blinks on display, then press 5 button when “02-“ is blinking.
After that, “025” will blink on display for 2 seconds and playback starts automatically.
Method 2: Press 2 and then 5. “025” will blink on display for 2 seconds and playback starts
automatically.
GB - 4
1. Press STANDBY button to turn on the unit.
2. Connect an USB device to the USB port on unit.
3. Press SOURCE or USB button to select USB mode. After a few seconds, the total number of folder
and track will appear on display. Playback starts automatically.
Notes:
- Do not put anything other than a USB device to the port of this unit. Other objects may damage the
USB mechanism.
- The USB socket must not be connected to the computer directly, for that may damage the unit.
- There are many USB devices in the market. We cannot guarantee to support all different models
Please try another USB device if your device is not supported.
Fast search backward/forward
Press and hold / to search quickly within a track.
Select a folder (mp3 only)
• Press ALB+ on remote control to select the rst track of next folder of your current disc or USB.
• Press ALB- on remote control to select the rst track of previous folder of your current disc or USB.
Listening to the radio
1. Press STANDBY button to turn on the unit.
2. Press SOURCE or FM button to select FM Radio mode. “FM” appears on display.
3. Tune to a desired station with / on unit or TUN-/+ on remote control.
Note:
- For a better reception in FM, extend the antenna.
- If a stereo broadcast is received, “ST” is displayed. Press ST/MONO button on remote control to
switch between Mono and Stereo mode.
Presetting radio stations
The unit can store up to 30 FM stations in its memory.
Manual preset
1. Tune to a desired station.
2. Press MEMORY button on remote control. “P01” ashes on display.
3. Press M-/+ on remote control to select a desired preset location. Press MEMORY again to save the
radio station as the selected preset station.
4. Repeat above steps to preset a maximum of 30 stations.
Auto preset
In FM mode, press AUTO on remote control to start automatic preset programming.
Radio frequencies will be browsed and radio stations stored automatically. When all the available radio
stations are stored or all memory locations are full, the auto preset programming function will stop.
Retrieving the preset stations
In radio mode, press M-/+ on remote control to access a preset station.
In sleep mode, the unit will turn off automatically after a specied time.
You can select duration in minutes before the unit turns off automatically.
1. Press SLEEP button on remote control repeatedly to select 90-80-70-60-50-40-30-20-10- 00.
Release SLEEP button. “SL” icon remains on display.
Notes:
- Sleep time can only be set when the unit is turned ON.
- The sleep function is cancelled when “00” is selected, and “SL” icon disappears.
2. If you want to switch off the radio before sleep ends, press STANDBY button.
GB -6
Power supply: AC 100-240V~ 50/60Hz
Power consumption: 20W
Speaker: 8 ohms
Cleaning
WARNING: Disconnect the unit from the mains supply before cleaning.
- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
- Using solvents, abrasive or alcohol-based products risks damaging the appliance.
- If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an
authorized engineer.
Notes on disc
* Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in
malfunctions.
* Do not place more than one disc in the disc compartment.
* Do not try to open the disc compartment during playing.
* Do not touch the lens. Doing so may cause malfunction.
* If there is a scratch, dirt or ngerprints on the disc, it may cause tracking error. Before playing, clean
the disc with a cleaning cloth. Wipe the disc from the center out. Don't store discs in places with high
temperatures or high humidity, they can become warped. After playing, store the disc in its case.
Important Note
• Before transporting the unit, remove the disc from the disc compartment.
CAUTION: To reduce the risk of electric shock, do not remove the cover (or
back). There are no user serviceable parts inside the unit. Refer all servicing to
qualify personnel.
The lightening ash with arrowhead symbol within the triangle is a warning sign alerting the
user of “ dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of important
instructions accompanying the product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
GB -7
IMPORTANT!
- The ventilation should not be impeded by covering the ventilation openings with items such as
newspapers, table-cloths, curtains, etc.
- No naked ame sources, such as lighted candles, should be placed on the apparatus.
- The use of apparatus in moderate climates.
- The apparatus should not be exposed to dripping or splashing.
- Ensure a minimum distance of 5cm around the apparatus for sufcient ventilation.
- Do not place objects lled with liquids, such as vases, on the apparatus.
- The marking plate is located on the back of unit.
- Mains plug is used as the disconnect device and it shall remain readily operable. To be completely
disconnected the power input, the mains plug of the apparatus shall be disconnected from the mains
completely. The mains plug should not be obstructed or should be easily accessed during intended
use.
- Under the inuence of electrical fast transient or/and electrostatic phenomenon, the product may
malfunction and require user to power reset.
- Excessive sound pressure from earphones and headphones can cause hearing loss.
CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.
Class 1 laser product.
If at any time in the future you should need to dispose of this product please note that
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.(Waste
Electrical and Electronic Equipment Directive).
Note: Design and specication are subject to change without notice.
Inserting the plug of your headphones into the headphone jack will enable you to listen in private. When
using headphones, the speaker will be disconnected.
NOTE: READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES.
1. Avoid extended play at very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off your unit.
3. Keep the volume at a reasonable level even if your headset is an open-air type designed to allow you
to hear outside sounds. Please note that excessively high volume may still block outside sounds.
1
2
3
7
7
4
8
5
6
11
16
16
13
15
14
17
17
12
10
9
8
Push Speaker terminal tab
down to insert wire.
Release tab to lock wire in the
terminal.
BASIC OPERATION
Play/pause
Press to pause playback. Press again to resume.
Select a track
- By /
Press / to select a track.
- By number buttons 10+, 0-9
Use the number buttons to input the track number, and it will start playback from the selected track
automatically.
If you want to input the track number bigger than 9, use the 10+, 0-9 button.
Example 1, to select the 10
th
track:
Method 1: Press 10+ button once, “01-“ will blink on display for 2 seconds and playback starts
automatically.
Method 2: Press 1 and then 0. “010” will blink on display for 2 seconds and playback starts
automatically.
1 2
3
4
5
8
0
6
97
10+
PROG
STANDBY MUTE
ALB-
ALB+
VOL+
TUN- TUN+
VOL-
INTROREPEAT
RANDOM
AUTO / STOP
CD
USB
FM
SOURCE
SLEEP EQ MEMORY ST/MONO
R1
R4
R8

R11

R15

R16

R19

R12

R10
R5
R2
R3
R9

R13

R18

R17

R14

R22

R21

R20
R6
R6
R7
R10

LOCATION OF CONTROLS

SPEAKER CONNECTION

SLEEP FUNCTION

MAINTENANCE

SPECIFICATION

MORE INFORMATION

POWER SUPPLY

AUDIO CONTROLS

DISC OPERATION

RADIO

USING HEADPHONES (NOT INCLUDED)

BLUETOOTH FUNCTION

PLAY MODES(CD/MP3 ONLY)

USB OPERATION

To prevent possible hearing damage, do not listen at high volume levels for long
periods.
Maximum output voltage ≤ 150mV
NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France
Hereby, NEW ONE S.A.S, declares that this MUSE M-55 BT is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity
may be consulted at
http://www.muse-europe.com/conformity/M-55BT.pdf
HX-3187T IB MUSE 001 REV3 -GB.indd 1 2014/5/29 10:14:54
Muse M57BT

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le M57BT de la marque Muse ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du M57BT de la marque Muse de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Muse M57BT ici. Ce manuel appartient à la catégorie Lecteurs/enregistreurs de Cd et a été évalué par 1 personnes avec une moyenne de 10. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le M57BT de la marque Muse ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du M57BT de la marque Muse

Nul besoin d’acheter des haut-parleurs externes pour profiter d’un son de qualité. Grâce aux haut-parleurs intégrés, cet...
La commodité dans le creux de votre main, avec une télécommande qui facilite plus que jamais le contrôle de votre écran.
Généralités
Marque Muse
Modèle M57BT
Produit Lecteur/enregistreur de Cd
Langue Anglais
Type de fichier PDF
Haut-parleurs
Puissance évaluée de RMS 10 W
Haut-parleurs 2
Haut-parleurs intégrés Oui
Nombre de haut-parleurs intégrés 2
Types de supports
Lecture de CD-R Oui
Radio
Syntonaiseur numérique Oui
Antenne intégrée Oui
Type de bandes supportées FM
Caractéristiques
Lecture de MP3 Oui
changeur de CD Non
Quantité de stations préréglées 30
Platine à cassette Non
Nombre de disques optiques 1 disques
Types de disque supportés CD
Type d'appareil -
Couleur du produit Noir
Contenu de l'emballage
Adaptateur secteur fourni Oui
Écran
Écran backlight Oui
Écran LCD
Couleur de Backlight Ambre
Puissance
Type de source d'alimentation Secteur
Tension d'entrée de l'adaptateur secteur 100 - 240 V
Fréquence de l'adaptateur secteur 50/60 Hz
Caractéristiques de gestion
Télécommande fournie Oui
Connectivité
Casque connection 3,5 mm
Entrée AUX Oui
Sortie de casque 1
Poids et dimensions
Profondeur - mm
Hauteur - mm
Largeur - mm
voir plus

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Muse M57BT.

Votre question n'est pas dans la liste ? Posez votre question ici