NAD C 245BEE mode d'emploi

NAD C 245BEE
5.9 · 1
PDF mode d'emploi
 · 12 pages
Anglais
mode d'emploiNAD C 245BEE
SAVE THESE INSTRUCTIONS FOR LATER USE.
FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE
AUDIO EQUIPMENT.
1 Read instructions - All the safety and operating instructions should
be read before the product is operated.
2 Retain instructions - The safety and operating instructions should be
retained for future reference.
3 Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be
followed.
5 Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6 Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7 Water and Moisture - Do not use this product near water-for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8 Accessories - Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer,
or sold with the product. Any mounting of the product should follow
the manufacturers instructions, and should use a mounting accessory
recommended by the manufacturer.
9 A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may
cause the product and cart combination to overturn.
10 Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturers instructions have
been adhered to.
11 Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company.
The primary method of isolating the amplier from the mains supply
is to disconnect the mains plug. Ensure that the mains plug remains
accessible at all times. Unplug the AC power cord from the AC outlet if
the unit will not be used for several months or more.
12 Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will t into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to t, contact
your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13 Power - Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
product.
14 Outdoor Antenna Grounding - If an outside antenna or cable system
is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper grounding
of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installers attention to Section
820-40 of the NEC which provides guidelines for proper grounding and, in
particular, species that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
15 Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning
and power-line surges.
16 Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
17 Overloading - Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of re or
electric shock.
18 Object and Liquid Entry - Never push objects of any kind into this
product through openings as they may touch dangerous voltage
points or short-out parts that could result in a re or electric shock.
Never spill liquid of any kind on the product.
WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO
DRIPPING OR SPLASHING, AND OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHOULD NOT BE PLACED ON THE APPARATUS.
AS WITH ANY ELECTRONIC PRODUCTS, USE CARE NOT TO SPILL
LIQUIDS INTO ANY PART OF THE SYSTEM. LIQUIDS CAN CAUSE A
FAILURE AND/OR A FIRE HAZARD.

IMPORTANT SAFETY INSTRUCTIONS

2

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Mode d'emploi

Consultez gratuitement le manuel de la marque NAD C 245BEE ici. Ce manuel appartient à la catégorie Récepteurs et a été évalué par 1 personnes avec une moyenne de 5.9. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le C 245BEE de la marque NAD ou avez-vous besoin d’aide? Posez votre question ici

Besoin d’aide?

Vous avez une question sur le NAD C 245BEE et la réponse n'est pas dans le manuel? Posez votre question ici. Fournissez une description claire et complète du problème, et de votre question. Plus votre problème et votre question sont clairement énoncés, plus les autres propriétaires de NAD C 245BEE ont de chances de vous fournir une bonne réponse.

Nombre de questions : 0

Spécifications du C 245BEE de la marque NAD

Vous trouverez ci-dessous les spécifications du produit et les spécifications du manuel du NAD C 245BEE.

Généralités
Marque NAD
Modèle C 245BEE
Produit récepteur
EAN 5803120221172
Langue Anglais
Type de fichier Mode d’emploi (PDF)
Audio
Canaux de sortie audio 4.0 canaux
Massima potenza per canale 95 W
Classe de l'amplificateur A/B
DHT, distorsion harmonique totale 0.03 %
Rapport signal-sur-bruit 110 dB
Gamme de fréquence 20 - 20000 Hz
Facteur d'amortissement 180
Énergie dynamique par canal (4 Ohm) 85 W
Énergie dynamique par canal (8 Ohm) 55 W
Sortie d'énergie mode bridge par canal (8 Ohm) 70 W
Sensibilité d'entrée 270 mV
Impédance d'entrée de sync. 20000 Ohm
Connectivité
Type de connectivité des haut-parleurs Bornier
Connecteur audio (L,R) intégré 4
Sortie Audio (Gauche, Droite) 4
Entrée DC Oui
Détails techniques
Couleur du produit Noir
Utilité Maison
Technologie de connectivité Avec fil
Bouton marche/arrêt intégré Oui
Puissance
Tension d'entrée AC 120-230 V
Fréquence d'entrée AC 50 Hz
Consommation électrique typique 270 W
Consommation d'énergie (mode veille) 1 W
Intensité (max.) 20 A
Poids et dimensions
Largeur 435 mm
Profondeur 285 mm
Hauteur 80 mm
Poids 7300 g
Informations sur l'emballage
Dimensions du colis (LxPxH) 435 x 315 x 95 mm
Poids du paquet 8800 g
voir plus

Foire aux questions

Vous ne trouvez pas la réponse à votre question dans le manuel? Vous trouverez peut-être la réponse à votre question dans la FAQ sur le NAD C 245BEE au dessous de.

Votre question n'est pas dans la liste ? Posez votre question ici

Aucun résultat