Römer Max-Fix

Römer Max-Fix mode d'emploi

(1)
  • 08
    09
    10
    11
    14
    01 02
    07
    03
    04
    06
    05
    12
    15
    17
    18
    16
    13
    19
    CARE AND MAINTENANCE
    Please observe the instructions on the use of child restraint systems described
    in your vehicle owners manual.
    The seat may be used in all vehicles equipped with the ISOFIX anchoring
    systems. Please consult your vehicle owners manual for information the seats
    which are approved for child safety seats in the weight class 0-18 kg.
    The fastening with ISOFIX and support leg is based on semiuniversal approval.
    The seat may be used only in those vehicles cited in the enclosed vehicle type
    list. This type list is constantly updated. The latest version can be obtained from
    us or from www.britax.eu / www.roemer.eu.
    You can use your child car seat as follows:
    NEXT CHILD SAFETY SEATS
    USE IN THE VEHICLE
    PRODUCT OVERVIEW
    Shoulder pads
    Harness buckle
    Headrest
    Cover
    ISOFIX insert guides
    ISOFIX attachement points (car)
    Shoulder straps
    01
    02
    03
    04
    05
    06
    07
    ISOFIX indicators
    Recline wheel
    Adjustment strap
    Adjusting button
    Release button
    08
    09
    10
    Fabric loop
    11
    Locking arms
    12
    13
    14
    Support leg
    15
    16
    Support leg indicator
    17
    Adjustment buttons
    18
    TWO-YEAR WARRANTY
    For this child safety seat we offer a 2-year warranty against manufacturing or
    material defects. The warranty period is effective from the day of purchase.
    The warranty covers only child safety seats which have been handled properly
    and which have been sent to us in a clean and proper condition.
    The Warranty does not cover:
    • natural signs of wear and damage resulting from excessive stress
    • damage resulting from inappropriate or improper use
    What is covered by the warranty?
    Fabrics: All of our fabrics meet very high requirements with regard to colour
    fastness when exposed to UV radiation. Nevertheless, all fabrics fade when
    exposed to UV radiation. This is not a material defect, but rather a normal sign
    of wear which is not covered by the warranty.
    Buckle: Buckle malfunctions are often due to accumulations of dirt or foreign
    bodies which may stop the buckle from working properly. If this happens, the
    buckle can be cleaned, olease follow the procedure described in your user
    instructions.
    Please contact your retailer immediately in the event of a warranty claim. He or
    she will give you the advice and support you need. When processing claims,
    product-specic depreciation rates will be applied. Please refer to our General
    Terms and Conditions which are available from your retailer.
    Use, care and maintenance
    The child safety seat must be used in accordance with the user instructions.
    We point out expressly that only genuine accessories and replacement parts
    must be used.
    BRITAX RÖMER
    Kindersicherheit GmbH
    Blaubeurer Straße 71
    D-89077 Ulm
    Germany
    t: +49 (0) 731 9345-199/-299
    f: +49 (0) 731 9345-210
    e: info@de.britaxeurope.com
    www.roemer.eu
    BRITAX EXCELSIOR LIMITED
    1 Churchill Way West
    Andover
    Hampshire SP10 3UW
    United Kingdom
    t: +44 (0) 1264 333343
    f: +44 (0) 1264 334146
    e: helpline@uk.britaxeurope.com
    www.britax.eu
    To ensure the full protective effect of the child safety
    seat:
    In the event of an accident with an impact speed above 10
    km/h it is possible that the child safety seat may have been
    damaged, but that the damage may not be immediately obvi
    ous. In this case the child safety seat must be replaced.
    Please dispose of it properly.
    Regularly check all important parts for damage. Make sure
    that the mechanical components in particular are all in per-
    fect working order.
    To prevent damage, ensure that the child safety seat does
    not become jammed between hard objects (car door, seat
    runners etc.).
    Always have the child safety seat checked if it has been
    damaged (e.g. if it is dropped).
    Never lubricate or oil parts of the child seat.
    In order to properly protect your child, it is imperative that
    you install and use the MAX-FIX exactly as described in this
    manual.
    Please observe the waste disposal regulations in your country.
    CARE INSTRUCTIONS
    Disposal of packaging Container for cardboard
    Cover Residual waste, thermal utilisation
    Plastic parts In accordance with the labelling in the
    designated container
    Metal parts Container for metals
    Harness straps Container for polyester
    Buckle &latch Residual waste
    In the direction of travel No
    On seats featuring:
    ISOFIX attachments (between seat surface and
    backrest)
    Yes
    1)
    1) If there is a front airbag: Slide the passenger seat a long way back and refer to any
    instructions in vehicle owner’s manual.
    (Please observe the applicable regulations in your country)
    BRITAX RÖMER
    child safety seat
    Tested and certied ac
    -
    cording to ECE* R 44/04
    Group Body weight
    MAX-FIX 0+ & 1 0 to 18 kg
    The child safety seat has been designed, tested and certied according to the requirements of the Euro-
    pean Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certica-
    tion number are located on the orange certication sticker (sticker on the child safety seat).
    This certication will be invalidated if you make any modications to the child safety seat.
    The MAX-FIX child safety seat must only be used to secure your child in the vehicle. It must never be
    used as a seat or toy in the home.
    Risk of injury due to unauthorised modications! Unauthorised technical modications may reduce or
    entirely void the seat´s protective properties.
    - Do NOT make any technical modications to the baby seat.
    - Use the baby seat only as described in the user instructions.
    *ECE = European Standard for Child safety Equipment
    Care for the harness buckle
    It is vital for the safety of your child that the harness buckle works correctly.
    Malfunctions of the harness buckle are usually caused by accumulations of dirt
    or foreign bodies. Malfunctions are as follows:
    • The buckle latches are ejected only slowly when the red release button is
    pressed.
    • The buckle latches will no longer lock home (i.e. they are ejected again if you
    try to push them in).
    • The buckle latches engage without an audible „click“.
    • The buckle latches are difcult to insert (you feel resistance).
    • The buckle only opens if extreme force is applied.
    Remedy
    wash out the harness buckle so that it functions properly once again:
    Cleaning the harness buckle
    1. Open the harness buckle
    07
    (press the red button).
    2.Turn the recline wheel
    10
    and move the seat shell
    26
    upwards into the most
    reclined position.
    3. Grasp under the seat shell
    26
    and slide the metal plate
    24
    which is used to
    fasten the harness buckle
    07
    to the seat shell up on its edge through the
    strap slot
    25
    .
    4. Soak the harness buckle
    07
    in warm water with dishwashing liquid for at
    least an hour. Then rinse and dry it thoroughly.
    Cleaning the cover
    Please be sure to use only genuine Britax/RÖMER replacement seat covers,
    as the seat cover is an integral part of the child safety seat which plays an
    important role in ensuring that the system works properly. Replacement
    seat covers are available from your retailer.
    • The child seat must not be used without its cover.
    • The cover can be removed and washed with a mild detergent using the
    washing machine‘s cycle for delicate items (30 °C). Please observe the
    instructions on the washing label of the cover.
    • The plastic parts can be cleaned using soapy water. Do not use harsh
    cleaning agents (such as solvents).
    • The harnesses can be washed in lukewarm soapy water.
    • The shoulder pads can be washed in lukewarm soapy water.
    Caution: Never remove the buckle latches
    21
    from the straps.
    Caution: The child seat must not be used without the seat cover.
    Removing the cover
    1. Turn the recline wheel
    10
    and move the seat shell
    26
    downwards into the
    upright position.
    2. Loosen the harness straps as far as possible.
    3. Open the harness buckle
    07
    (press the red button).
    4. Slide the headrest
    04
    to its lowest position.
    6. Remove the cover of the headrest
    04
    .
    7. Open the poppers on the left and right of the rear part of the cover.
    8. Fold the rear part of the cover onto the seat surface.
    9. Thread the harness straps through the cutout in the cover.
    10. Unhook the elastic seam of the cover under the edge of the seat shell.
    TIP: Start at the handles on the side and at the upper edge of the seat shell.
    11. Pull the cover up and over the bezel of the strap adjuster.
    12. Feed out the harness buckle
    07
    and the end of the strap from the cover.
    13. Pull the cover upwards a little and then put it with the cutout over the head-
    rest
    04
    .
    Re-tting the Cover:
    Simply follow the steps in the opposite order.
    Caution: Check that the harness straps are not twisted and that they
    have been correctly inserted in the belt slots on the cover.
    Storage compartment
    19
    MAX-FIX base
    BRITAX RÖMER Child safety seats
    Testing and certication
    in accordance with ECE R 44/04
    Rearward facing Forward facing Group Body weight
    MAX-WAY 12 9 – 25 kg
    MULTI-TECH 2 12 9 – 25 kg
    KIDFIX /KIDFIX SICT 23 15 – 36 kg
    KID / KID plus 23 15 – 36 kg
    0-18 kg
    07
    10
    26
    24
    07
    04
    10
    MAX-FIX
    0 – 18 kg
    0 ~ 4 y
    User instructions
    GB
    www.britax.eu
    EDV-Nr. 2000007169 13/03
Römer Max-Fix

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le Max-Fix de la marque Römer ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du Max-Fix de la marque Römer de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Römer Max-Fix ici. Ce manuel appartient à la catégorie Sièges de voiture et a été évalué par 1 personnes avec une moyenne de 6.9. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le Max-Fix de la marque Römer ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du Max-Fix de la marque Römer

Généralités
Marque Römer
Modèle Max-Fix
Produit Siège de voiture
Langue Anglais
Type de fichier PDF
Poids et dimensions
Largeur 450
Profondeur 530
Hauteur 780
Poids 14200
Caractéristiques
Groupe siège auto 0+/1 (0 - 18 kg; 0 - 4 ans)
Type de montage ISOFIX
Couleur du produit Gris

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Römer Max-Fix.

Votre question n'est pas dans la liste ? Posez votre question ici

ModesdEmploi.fr

Vous cherchez un manuel ? ModesdEmploi.fr vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

ModesdEmploi.fr

© Copyright 2020 ModesdEmploi.fr. Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.

En savoir plus