Sagem D14T mode d'emploi

Sagem D14T
8.7 · 2
PDF mode d'emploi
 · 2 pages
Anglais
mode d'emploiSagem D14T

ENGLISH

ENGLISH

ENGLISH

D14T
D14T
D14T
1
I
NTRODUCTION
Dear customer,
Thank you for purchasing a Sagemcom DECT telephone we appreciate your trust in us.
This product was manufactured with the utmost care, should you encounter difficulties during its use we
recommend that you refer to this user guide. You can also find information on the following site:
http://www.sagemcom.com
For your comfort and safety, we ask that you read the following section carefully:
R
ECOMMENDATIONS AND SAFETY INSTRUCTIONS
Your DECT telephone must not be installed in a humid room (wash-up room, bathroom,
laundry room, kitchen, etc.) unless it is 1.50 m away from a water point or outside. Your
telephone must be operated at temperatures ranging from 5°C and 45°C.
Only use the supplied power adapter, connect it to the base socket according to the
installation instructions provided in this booklet and the indications on the identification
label affixed to it (voltage, current, electric network frequency). As a precaution, in case
of danger, the mains adapters act as a disconnecting mechanism for the 230V power
supply. They should be placed near the device and should be easily accessible.
This telephone was designed for use on the public switched telephone network (PSTN).
In case of a problem you must first contact your reseller. Only use the supplied
telephone cord.
For your personal safety, never place your handset on the base without the batteries,
or without the battery cover, you could get an electric shock.
To avoid damaging your handset, only use certified rechargeable AAA batteries NiMH
1.2 V 400 mAH, never use non rechargeable batteries. Insert the batteries in the handset
battery compartment respecting polarity.
At the end of their useful life, batteries must be disposed of according to the recycling
instructions presented in this booklet.
Your DECT telephone has an inside radio range of about 50 metres and up to
300 metres in open space. The immediate presence of metal parts, (of a television for
example), of any electric appliance may result in range reduction.
Some sensitive medical equipment and safety equipment may be affected by the radio-
frequency transmissions of your telephone. In all cases, we ask that you respect the
safety recommendations.
In areas where storms are frequent, we recommend that you protect your telephone line
using a surge protection device .
This equipment does not function in the case of an electric network shutdown: for
emergency calls, it is recommended to use another unit during power cuts.
The CE marking certifies that the product meets the essential requirements of Directive
1999/5/CE of the European Parliament and of the Council pertaining to microwave radio
equipment and telecommunication terminal equipment, for the safety and health of
users, for electromagnetic interference. Furthermore, it efficiently uses the frequency
spectrum attributed to ground and spatial communication to prevent damaging
interference.
The declaration of compliance may be looked up on the www.sagemcom.com site
"support" section or can be obtained from the following address :
Sagemcom Broadband SAS
250, route de l'Empereur - 92848 Rueil-Malmaison Cedex - France
D14T
D14T
D14T
2
B
EFORE YOU BEGIN
Make sure your package includes the following: Base unit, handset, one battery compartment cover,
telephone line cord, AC power supply, two rechargeable batteries, and this user guide.
In the case of purchasing a pack duo or trio, you will find in addition for each additional handset: a
handset charger, one battery compartment cover, two rechargeable batteries.
Installing the phone
!
-
+
-
+
RechargeablebatteriesPower socketTelephone socketPaging button- Pressed briefly : telephone set paging.- Hold down pressed (4 seconds minimum) : telephone set registration.
1. Remove the batteries compartment door of handset.
2. Insert the batteries, taking care to respect the polarity as indicated in the compartment.
3. Put the compartment door back on. «SEARCHING...» appears on the screen.
4. Plug the power supply cord into AC outlet and the other end into the power jack on the base
bottom.
5. A welcome message in all the languages supported by the telephone is displayed on the screen,
press OK *.
6. Select the country using  or keys, press OK.
7. A screen asks you to confirm your choice. Press OK.
You will hear a confirmation tone.
Place the handset in the base station to charge for 15 hours prior to first use.
8. Plug one end of the telephone line cord into the modular wall phone jack and the other end into
the jack on the base.
9. 10. After charging, press
key. You can hear dial tone.
* : depending on country

ENGLISH

ENGLISH

ENGLISH

D14T
D14T
D14T
3
Handset keys
Intercom key
Earpiece
Red key:
Talk off /
Switch handset on/off
Access to phonebook /
Navigation key down
Navigation key up /
Access the caller list
Deactivate / Activate handset
ringer (Press and hold)
Microphone
Screen
Access to outgoing call list
Menu key
OK key:
Selection / Validation
Green key:
Talk on
Activate, deactivate keypad lock
(Press and hold)
R key:
Second call / conference
Back key / Cancel /
Correction /
Change standby screen
(Press and hold)
Mute:
Activate / Deactivate the microphone
Quick guide to handset display icons
Signal strength icon (blinking when no signal or the signal strength is weak).
Call (blinks when you receive a call)
Voicemail icon: indicates that new messages are present in your voicemail box.
Handset ringer muted.
Received call list (appears when a new call is in the caller list).
Memory.
Charging status icon ( : Full ; + flashing (charger not connected) : Flat; blinking
during charging).
Changing the batteries
Make sure the telephone is OFF before you replace batteries.
1. Remove the batteries compartment door.
2. Remove old batteries.
3. Insert the new batteries.
4. Put the batteries compartment door back on.
5. Place handset in the base to charge.
D14T
D14T
D14T
4
M
ENU STRUCTURE
Quick reference
phonebook New entry Clock&alarm date / time
List Set format
Edit entry Alarm
delete Alarm tone
delete all
Directe mem. Advanced set Change pin
registration
Unregister
country
reset
Personal set Handset name AUTO PREFIX
Handset tone Recall time
LANguage Dial mode
Auto hang-up First ring
Navigation
To navigate among the menus, use the keys: MENU, or, OK and BACK.
Example: To change the ring tone, go to the menu Personal set / Handset tone / ring tones.
To do this:
1. Press MENU. Select " Personal set " using the or key.
2. Press OK. Select " Handset tone " using the or key.
3. Press OK. Select "ring tones " using the or key.
4. Press OK. 10 melodies are available: "melody 1"… "melody 10".
Select the desired melody using the or key.
5. Press OK key to confirm your selection.
C
ALLS
Make a call
Ensure that the handset is switched on.
1. Press the Talk key
. you will hear the dialling tone and the display will show you the phone
icon
.
2. Enter the phone number.
- OR-
1. Enter the phone number first and then press
key.
Answering a call
When the phone rings, press the key to answer the call.
You can adjust the volume of what you hear through the handset at any time by
pressing or ҏkey.

ENGLISH

ENGLISH

ENGLISH

D14T
D14T
D14T
5
Ending a call
To end a call press .
Microphone mute function
- Enable MUTE function: press the key. The display shows "mute on".
- Disable MUTE function: press the
key. Your correspondent can hear you again.
Voice Mail (According to operator)
With this function you can receive calls in your absence on a voice message recorder in the switched
telephone network. To indicate that a new message has been received the envelope icon
and
the new event message "
voicmail
" are displayed on the Handset screen.
Your voicemail number is not set in the factory.
1. Dial the number of your operator’s voice message recorder.
2. The envelope icon
disappears when there are no more new messages.
C
ALL LOG
Calling line identification presentation (CLIP)
This CLIP phone stores and displays CLIP information provided by your local telephone company.
You must subscribe to CLIP service in order to use this unit.
If you have not subscribed to CLIP service or if the caller number is suppressed, the display shows
“unknown”.
Display of numbers not available:
-
Unavailable
: you are not in same area as your contact.
-
Hide id
: your contact does not want their number to be displayed.
Received call log
The received call log presents the calls you received. (max.10 last calls).
1. Press
, the icon is displayed.
2. The most recent name or call number is displayed according to whether your contact's number
is included in your phonebook or not.
3. Press BACK to display the date and the time of the call.
4. Press the or key to go through the list.
If the number is too long (more than 12 digits), the screen will not show the number
in full.
Press OK key to go to last number page for CID length.
Diallled call log
The dialled call log presents the calls you made (max. 5 last calls).
To consult the list:
1. Press briefly
.
2. The last dialled number is displayed. Press the
or
key to consult the list of the last 5
numbers dialled.
D14T
D14T
D14T
6
Calling back a caller
1. Press the or key.
2. Press the or key to select a call record.
3. Press the
key to dial the number.
Making an entry in the directory from the list of calls received.
1. Press the or key.
2. Use or to select the desired caller number.
3. Press MENU key, then select "save number ".
4. Enter the name of the entry. Press OK.
Deleting caller list record
1. Press the or key.
2. Press or key to select a call record.
3. Press MENU.
- Select " delete " to delete the current record.
- Select " delete all " to delete the entire Caller list.
4. A confirmation screen appears.
5. Using the telephone touch keys:
- If you do not wish to delete the current record, press BACK.
- To delete the current record, press OK.
P
HONEBOOK
You can store 50 phonebook entries (24 digits and 12 characters) in your phonebook.
Dialling a memory number
1. Press key to consult the list of contacts.
2. Press the or key to consult directory entries.
3. When you have selected the desire number, press
.
Creating / Storing a memory
1. Go to the menu " phonebook " / " new entry "
2. Enter the name of the entry. Press OK.
3. Enter the number of your entry using the keypad keys. Press OK.
Editing a memory
1. Go to the menu " phonebook " / " edit entry ".
2. Select the entry you want to edit using or . Press OK.
3. You will then enter the name input screen and the cursor will be at the end of the name :
- The information is accurate. Press OK key.
- To correct the name, press BACK key to delete characters.
- Enter the new name and press OK key.
4. You will then enter the number screen and the cursor will be at the end of the number :
- The information is accurate. Press OK key.
- To correct the number, press BACK key to delete the numbers.
- Enter the new number and press OK key.

ENGLISH

ENGLISH

ENGLISH

D14T
D14T
D14T
7
Deleting a memory / the whole phonebook
1. Go to the menu " phonebook " / "delete " (or " delete all " to delete the entire phonebook list).
2. Select the entry you want to delete using or . Press OK :
- If you do not wish to delete the entry, press BACK.
- To delete the entry, press OK key.
Assign a shortcut
This menu allows you to record two quick dial numbers assigned to the keys 1 and 2 on the
keyboard.
1. Go to the menu " phonebook " / " directe mem. ".
2. Select the key you want to assign a number (1 or 2).
3. Press OK, " no number " is displayed on the screen.
4. Press MENU.
5. " eidt number " appears on the screen.
6. Press OK.
7. Enter the name of the entry and press OK to confirm.
8. Enter the number of the entry. Press OK to confirm. You will hear a confirmation tone.
To call the number you have assigned to one of the shortcut keys, 1. Hold down the key on which
the number was programmed (1 or 2).
Inserting a pause (in dialling)
You can insert a pause in dialling a phone number if you want to wait before actually ringing.
While dialling the number you want to call, press and hold the key to insert the pause : The
display shows a ’’P’’.
U
SING THE MULTI
-
HANDSET CAPABILITIES
These functions are used for handset management when two or more handsets are registered on the
same base.
Intercom Call/Intercom
1. Make sure your handset is on standby mode.
2. Press the
key on the handset.
- If your installation has two handsets, the second handset is directly called, and, "handset "
followed by the handset number are displayed on the screen.
- If your telephone installation has more than two handsets, the icon INT blinks on the screen
and the number of all registered handsets.
- Enter the desired handset number or press the
key if you want to call all handsets.
Answering an internal call
1. The ring melody from an internal call is different from an external call. " handset " and the calling
handset number appear on the screen. The "
" is blinking.
2. Press the
key to answer. The " " stop blinking.
3. Ending an internal call press the
key.
D14T
D14T
D14T
8
Managing an external and an internal call
Transfering an external call to another handset registered on same base
1. During a call, press . The external user is put on hold.
2. Enter the internal call number. When the user answers, you can announce the call.
3. Press the
key to transfer the call.
To switch from one call to another, press and hold down the key until an aural
signal is heard.
If the called handset does not answer, press to take back the call.
Making conference calls (3-way conversation)
You can connect one external call to two handsets registered at the base station. To set up a
telephone conference from an external call:
1. Press
key. The external user is put on hold.
2. Enter the internal call number. Wait until the internal user answers.
3. Press and hold
key, until an aural signal is heard to start a three-way conference.
"conference" is displayed on the handset screen.
Two outside calls
Taking a second call while you are already on line
During a call, a beep is emitted by your operator to inform you that a second call is on hold. A screen
displays the number of this second caller on hold.
Press
then the key to take back this new call.
Your first contact is put on hold and you can talk with the second caller.
Making a second call while you already on line
During a conversation, press then dial the number to be called.
The call in process is then put on hold and you can take the second call back.
Switching from one call to the other
To switch from one call to the other, press then the key .
The call in process is then put on hold and you can take the second call back.
Ending one of the two calls
To end one call and continue with the other, press then the key .
The call in process is then ended finally and you take the second call back.
To set up a 3-way conference (the 2 calls and yourself)
During a conversation, press then the key .
You can then talk with the 2 contacts at the same time.
To end the 3-way conference, press the red key
.
Dépliant LU D14T EN.fm Page 1 Dimanche, 7. mars 2010 11:57 11

Mode d'emploi

Consultez gratuitement le manuel de la marque Sagem D14T ici. Ce manuel appartient à la catégorie Téléphones et a été évalué par 2 personnes avec une moyenne de 8.7. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le D14T de la marque Sagem ou avez-vous besoin d’aide? Posez votre question ici

Besoin d’aide?

Vous avez une question sur le Sagem D14T et la réponse n'est pas dans le manuel? Posez votre question ici. Fournissez une description claire et complète du problème, et de votre question. Plus votre problème et votre question sont clairement énoncés, plus les autres propriétaires de Sagem D14T ont de chances de vous fournir une bonne réponse.

Nombre de questions : 0

Spécifications du D14T de la marque Sagem

Vous trouverez ci-dessous les spécifications du produit et les spécifications du manuel du Sagem D14T.

Généralités
Marque Sagem
Modèle D14T
Produit Téléphone
Langue Anglais
Type de fichier Mode d’emploi (PDF)
représentation / réalisation
Type Téléphone DECT
Nombre de sonneries 10
Répondeur intégré Non
Porteé maximum extérieur 300 m
Portée maximum intérieur 50 m
Caractéristiques de gestion
Réveil Oui
Bouton de navigation Oui
Indication
Témoin de charge faible Oui
Indicateur de capacité de la batterie Oui
Caractéristiques du téléphone
Haut-parleur Non
Fonction Paging (Touche de recherche du combiné sur la base) Oui
Compatible avec plusieurs combinés 4
Compatible avec plusieurs bases 4
Désactivation du microphone Oui
Capacité du répertoire 50 entrées
Gestion d'appel
Possibilité de conférence téléphonique Oui
Transfert d'appel explicite Oui
Identification de l'appelant Oui
Appel direct Oui
Capacité de la liste d'appels 10
Écran
Écran LCD
Nombre de ligne affichées 3 lignes
Connectivité
Raccordements sans fil Non
Design
Type de montage Bureau
Couleur du produit Black,White
Poids et dimensions
Dimensions de base 100 x 112 x 66 mm
Dimensions du combiné (LxPxH) 150 x 48 x 23 mm
Poids du téléphone 107 g
Poids de la base 98 g
Autres caractéristiques
Compatibilité Mac Non
Puissance
Temps de communication 8 h
Autonomie en veille 100 h
Technologie batterie Hybrides nickel-métal (NiMH)
voir plus

Foire aux questions

Vous ne trouvez pas la réponse à votre question dans le manuel? Vous trouverez peut-être la réponse à votre question dans la FAQ sur le Sagem D14T au dessous de.

Votre question n'est pas dans la liste ? Posez votre question ici

Aucun résultat