Shure Beta 58A mode d'emploi

Shure Beta 58A
9.1 · 1
PDF mode d'emploi
 · 12 pages
Français
mode d'emploiShure Beta 58A

Model BETA 58A

®

User Guide

©2005, Shure Incorporated
27C2796 (Rev. 5)
Printed in U.S.A.

MODEL BETA 58A

®

SUPERCARDIOID DYNAMIC

VOCAL MICROPHONE

GENERAL
The Shure BETA 58A is a high-output, supercardioid dynamic vo-
cal microphone for professional sound reinforcement and project
studio recording. It maintains a true supercardioid pattern through-
out its frequency range. This ensures high gain before feedback,
maximum isolation from other sound sources, and minimum off-
axis tone coloration.
The BETA 58A has a shaped frequency response that is ideal for
close-up vocals. The superb performance of this microphone is not
affected by rough handling because of its rugged construction,
proven shock mount system, and hardened steel mesh grille. Typ-
ical applications for the BETA 58A include lead vocals, backup vo-
cals and speech.
FEATURES:
Frequency response tailored for vocals, with brightened
midrange and bass rolloff to control proximity effect
Uniform supercardioid pattern for high gain before
feedback and superior rejection of off-axis sound
Neodymium magnet for high signal-to-noise output
Hardened steel mesh grille that resists wear and abuse
Advanced pneumatic shock mount system that minimizes
transmission of mechanical noise and vibration
Minimally affected by varying load impedance
Legendary Shure quality and reliability
APPLICATION AND PLACEMENT
The BETA 58A is designed for close-up vocals, and can be hand
held or mounted on a stand. Some of the most common applica-
tions and placement techniques are listed in the following table.
Keep in mind that microphone technique is largely a matter of per-
sonal taste; there is no one "correct" microphone position.
GENERAL RULES FOR MICROPHONE USE
Aim the microphone toward the desired sound source and
away from unwanted sources. Since supercardioid
microphones such as the BETA 58A have narrow pickup
patterns and can pick up sounds from the rear, this may
not be obvious or intuitive.
Place the microphone as close as practical to the desired
sound source. Refer to the table above.
Work close to the microphone for extra bass response.
Use only one microphone to pick up one sound source.
Keep the distance between microphones at least three
times the distance from each source to its microphone.
Use the fewest number of microphones as is practical.
Place microphones as far as possible from reflective
surfaces.
Add a windscreen when using the microphone outdoors.
Avoid excessive handling to minimize pickup of
mechanical noise and vibration.
Do not cover any part of the grille with your hand.
PROXIMITY EFFECT
Unidirectional microphones such as the BETA 58A progressively
boost bass frequencies by 6 to 10 dB at 100 Hz when the micro-
phone is at a distance of about 6 mm (1/4 in.) from the sound
source. This phenomenon, known as proximity effect, can be used
to create a warmer, more powerful sound. To prevent explosive low
frequency sound during close-up use, the BETA 58A bass re-
sponse gradually rolls off. This provides greater control and helps
the user take advantage of proximity effect.
SUGGESTED MICROPHONE
PLACEMENT
TONE QUALITY
Lips less than 15 cm (6 in.) away
or touching the windscreen, on
axis to microphone.
Robust sound, emphasized bass,
maximum isolation from other
sources.
15 to 60 cm (6 in. to 2 ft.) away
from mouth, just above nose
height.
Natural sound, reduced bass.
20 to 60 cm (8 in. to 2 ft.) away
from mouth, slightly off to one side.
Natural sound, reduced bass and
minimal "s" sounds.
90 cm to 1.8 m (3 to 6 ft.) away. Thinner, distant sound; noticeable
levels of ambient noise.

Mode d'emploi

Consultez gratuitement le manuel de la marque Shure Beta 58A ici. Ce manuel appartient à la catégorie Microphones et a été évalué par 1 personnes avec une moyenne de 9.1. Ce manuel est disponible dans les langues suivantes: Français, Anglais. Vous avez une question sur le Beta 58A de la marque Shure ou avez-vous besoin d’aide? Posez votre question ici

Besoin d’aide?

Vous avez une question sur le Shure Beta 58A et la réponse n'est pas dans le manuel? Posez votre question ici. Fournissez une description claire et complète du problème, et de votre question. Plus votre problème et votre question sont clairement énoncés, plus les autres propriétaires de Shure Beta 58A ont de chances de vous fournir une bonne réponse.

Nombre de questions : 0

Spécifications du Beta 58A de la marque Shure

Vous trouverez ci-dessous les spécifications du produit et les spécifications du manuel du Shure Beta 58A.

Généralités
Marque Shure
Modèle Beta 58A
Produit microphone
EAN 42406054720, 4939325012978, 0042406190572
Langue Français, Anglais
Type de fichier Mode d’emploi (PDF)
Microphone
Type Microphone de scène/direct
Impédance d'entrée du microphone 150 Ohm
Sensibilité du microphone -51 dB
Fréquence du microphone 50 - 16000 Hz
Connectivité
Technologie de connectivité Avec fil
Autres caractéristiques
Connecteur(s) XLR
Poids et dimensions
Poids du Microphone 278 g
représentation / réalisation
Couleur du produit Gris
voir plus

Foire aux questions

Vous ne trouvez pas la réponse à votre question dans le manuel? Vous trouverez peut-être la réponse à votre question dans la FAQ sur le Shure Beta 58A au dessous de.

Votre question n'est pas dans la liste ? Posez votre question ici

Aucun résultat