Sony ICD-P28

Sony ICD-P28 mode d'emploi

(1)
  • Step 2: Setting the Clock
    BGetting Started
    Installing the Software
    Install the “Digital Voice Editor” software in your
    computer’s hard disk.
    Notes
    When you install the “Digital Voice Editor” for ICD-MS/SX/
    ST/S/BP/BM/P Series, you can create compatible file
    formats (mentioned in “About the File Formats”).
    When you install the “Digital Voice Editor” for ICD-MS/SX/
    ST/S/BP/BM Series, you can create all the compatible file
    types except for the DVF (TRC) files. (You can play back the
    DVF (TRC) files.)
    When installing both types of the “Digital Voice Editor”,
    make sure to select overwrite installation to handle all
    the compatible file formats.
    •Do not connect the IC recorder to the computer before
    installing the Software.
    Be sure to close all running programs before installing the
    “Digital Voice Editor” software.
    When installing or uninstalling the software in Windows
    ®
    2000 Professional, make sure to log on Windows as the user
    name of “Administrator. ”
    When installing or uninstalling the software in Windows
    ®
    XP Professional/Home Edition, log on as a user name with
    the “Computer administrator” user account. (To find if the
    user name has a “Computer administrator” user account,
    open the “User Accounts” from the “Control Panel” and
    refer to the section beneath the user name being displayed.)
    When the “Memory Stick Voice Editor 1.0/1.1/1.2/2.0”
    software has already been installed, installing the supplied
    software will automatically remove the “Memory Stick Voice
    Editor” software. (Messages are not removed.)
    After installing, the Microsoft DirectX module is also installed
    depending on the operation system of your computer. This
    module is not deleted after uninstalling the software.
    After installing the “Digital Voice Editor” software, do not
    install the “Memory Stick Voice Editor 1.0/1.1/1.2/2.0”
    software. The “Digital Voice Editor” will not work properly.
    With the supplied software, you can save or edit the
    messages in the “Memory Stick”.
    1 Turn on your computer and start up
    Windows.
    2 Insert the supplied CD-ROM into the CD-
    ROM drive.
    The installer starts up automatically and the
    welcome window appears.
    If the installer does not start up, double click [DVE
    Setup.exe] in the [English] folder.
    If you have already installed a previous
    version of the “Digital Voice Editor” or any
    version of the “Memory Stick Voice Editor”
    The dialog box to uninstall the previous version
    may be displayed. (Messages are not removed.)
    Follow the instructions on the screen to uninstall
    the software and then the installation of the
    current version starts.
    3 Follow the displayed instructions.
    When the [Restart] dialog box appears, click [OK]
    to restart the computer.
    Now the installation is completed.
    When the dialog box used to input the
    owner name is displayed
    Input the owner name for your identification with
    the Digital Voice Editor.
    To USB connector
    of IC recorder
    USB connecting
    cable (supplied)
    To USB connector
    of your computer
    Inserting a “Memory Stick” to
    your computer (ICD-MS series)
    Remove the “Memory Stick” from the IC recorder and
    insert it to your computer by using either of the
    following methods:
    If your computer has a “Memory Stick” slot
    Insert the “Memory Stick” directly into the slot.
    If your computer does not have a “Memory
    Stick” slot
    Use either of the devices below to insert the “Memory
    Stick” to your computer. In either case, you need to
    install the driver for the device. For details, refer to
    the instruction manual of the device you use.
    Using the Sony PC Card Adaptor (ex. MSAC-PC3)
    Insert the “Memory Stick” into the PC Card
    Adaptor. Then insert the PC Card Adaptor into the
    PC card slot of your computer.
    Note
    When using the PC Card Adaptor, make sure to release the
    LOCK switch of the “Memory Stick”.
    Using the USB-compatible Sony Memory Stick
    Reader/Writer (ex. MSAC-US70)
    Connect the Memory Stick Reader/Writer to the
    USB connector of your computer with the supplied
    cable. Insert the “Memory Stick” into the Memory
    Stick Reader/Writer.
    Using the IC recorder as a removable
    disk
    (ICD-MS515, ICD-S/ICD-BM series)
    Data storage function (ICD-S series)
    “Memory Stick” reader/writer function (the
    IC recorder equipped with a USB connector)
    When connecting the IC recorder and your computer
    through the USB connectors, you can temporarily save
    an image or text file of your computer onto the IC
    recorder or the “Memory Stick” as follows:
    1 Connect the IC recorder and your computer
    through the USB connectors.
    2 Open “My Computer” in the Windows and
    check to see that a new removable disk is
    correctly recognized.
    3 Use the Explorer or another to copy files of
    your computer onto the removable disk.
    Notes
    •A file saved without using the “Digital Voice Editor” cannot
    be played or displayed on the IC recorder even if it is of a
    compatible file format.
    When you view the contents of the removable disk with the
    Explorer, the VOICE folder will be displayed. Make sure to
    use the “Digital Voice Editor” software to move, copy, add,
    or delete a file in the VOICE folder.
    According to the size of the files copied, the maximum
    recordable time of the IC recorder may reduce.
    Do not format the removable disk on your computer.
    Notes
    Be sure to install the “Digital Voice Editor” software before
    connecting the IC recorder to your computer. Otherwise, a
    message like [Found New Hardware Wizard] may appear
    when you connect the IC recorder to your computer. In this
    case, click [Cancel].
    Depending on the IC recorder you use, the [Hardware
    Installation] warning message may appear when you
    connect the IC recorder to the USB connector of your
    computer for the first time in Windows
    ®
    XP Professional/
    Home Edition. In this case, you may ignore the message
    without problem and click [Continue Anyway] to proceed
    with the software installation or proceed with using the
    software.
    Do not connect more than two USB devices to your
    computer. Normal operation will not be guaranteed.
    Use of this IC recorder with a USB hub or a USB extension
    cable is not guaranteed.
    •A malfunction may occur depending on the USB devices
    connected at any one time.
    Before connecting the IC recorder to the computer, check the
    remaining battery power of the IC recorder (more than one
    segment of the battery indicator “
    ” should be on) . If
    the batteries are exhausted, communication between the IC
    recorder and the computer may not succeed.
    When you connect the IC recorder to the computer, make
    sure that the IC recorder is in the stop mode.
    We recommend you disconnect the cable from the computer
    when you do not use the “Digital Voice Editor”.
    Connecting the IC Recorder to your Computer
    You can transfer the IC recorder data onto your
    computer either by connecting the IC recorder to the
    computer or inserting the “Memory Stick” into the
    computer.
    Connecting through the USB
    connectors (for the IC recorder
    equipped with a USB connector)
    Use the USB connecting cable supplied with the IC
    recorder to connect the USB connectors of the IC
    recorder and your computer.
    The IC recorder is recognized by the computer as soon
    as the cable is connected. You can connect or
    disconnect the cable when the IC recorder and the
    computer are turned on or off.
    3-264-819-11 (1)
    Digital Voice Editor 2
    Operating Instructions
    Before You Begin
    2004 Sony Corporation Printed in China
    Notice for Users
    About the File Formats
    The “Digital Voice Editor” can handle the following
    file formats. Depending on the file format, some
    editorial or saving functions may be limited on the
    “Digital Voice Editor”.
    DVF file [LPEC: for ICD-SX/ST series] (Digital
    Voice File/file extension: *.dvf)
    Sound file format used in recording messages on
    the Sony IC recorder ICD-SX/ST series equipped
    with a USB connector. You can select ST (stereo),
    SP and LP recording modes.
    DVF file [LPEC: for ICD-BPx50 series] (Digital
    Voice File/file extension: *.dvf)
    Monaural sound file format used in recording
    messages on the Sony IC recorder ICD-BPx50 series
    equipped with a USB connector. You can select SP
    and LP recording modes. The sound quality in the
    LP mode is improved from an LP mode DVF file for
    ICD-BP100/BPx20 series.
    DVF file [LPEC: for ICD-BP100/BPx20 series]
    (Digital Voice File/file extension: *.dvf)
    Monaural sound file format used in recording
    messages on the Sony IC recorder ICD-BP100/
    BPx20 series equipped with a USB connector. You
    can select SP and LP recording modes.
    DVF file [TRC: for ICD-Px8 series] (Digital Voice
    File/file extension: *.dvf)
    Monaural sound file format used in recording
    messages on the Sony IC recorder ICD-Px8 series
    equipped with a USB connector. You can select SP
    and LP recording modes.
    DVF file [TRC: for ICD-Px7 series] (Digital Voice
    File/file extension: *.dvf)
    Monaural sound file format used in recording
    messages on the Sony IC recorder ICD-Px7 series
    equipped with a USB connector. You cannot select
    the recording mode.
    MSV file [LPEC] (Memory Stick Voice file/file
    extension: *.msv )
    Monaural sound file format used in recording
    messages on the Memory Stick IC recorder ICD-
    MS515 and ICD-S series. You can select SP and LP
    recording modes.
    MSV file [LPEC: for ICD-BM series] (Memory Stick
    Voice file/file extension: *.msv)
    Sound file format used in recording messages on
    the Sony Memory Stick IC recorder ICD-BM series.
    You can select ST (stereo), SP and LP recording
    modes.
    MSV file [ADPCM] (Memory Stick Voice file/file
    extension: *.msv)
    Monaural sound file format used in recording
    messages on the Memory Stick IC recorder ICD-
    MS1. You can select SP and LP recording modes.
    WAV file (WAV FILE [8/11/16kHz, 16 bit,
    monaural] [44.1kHz, 16 bit, stereo] file/file
    extension: *.wav)
    PCM 8/11/16kHz, 16 bit monaural, or 44.1kHz 16
    bit stereo sound file used in recorded sound in
    standard Windows application software.
    MP3 file (MP3 file/file extension: *.mp3 )
    The MP3 file stores digital audio such as sound or
    songs and is commonly used to distribute it over
    Internet.
    Note: Digital Voice Editor cannot save a file in
    the MP3 file format.
    On the recording modes (ST/SP/LP)
    ST: Stereo recording mode. The file size becomes relatively
    larger than in the SP mode recording. (For the ICD-SX/ST/
    BM series only)
    SP: Standard play monaural recording mode in better sound
    quality. The file size becomes relatively larger than in the LP
    mode recording.
    LP: Long play monaural recording mode.
    Notes
    The “Digital Voice Editor 2” does not support the ICS file
    format (Sony IC recorder Sound file/file extension: *.ics ) used
    in recording messages on the IC recorder ICD-R100. To use an
    ICS file with the “Digital Voice Editor 2”, use the software
    compatible with the ICS file format such as “ICS converter”,
    “Sony ICD-PCLINK software” or “Digital Voice Editor Ver.
    1.x” to convert an ICS file into a WAV file. (The ICS Converter
    is available on the Sony web site as free software. )
    System Requirements
    Your computer and system software must meet the
    following minimum requirements.
    IBM PC/AT or compatible
    CPU: 266MHz Pentium
    ®
    II processor or higher
    RAM: 64MB or more
    Hard disk space: 70MB or more depending on
    the size and number of sound files you store.
    CD-ROM drive/“Memory Stick” drive
    *1
    USB connector
    *2
    (compatible with the standard
    USB 1.1)
    Sound board: Sound Blaster 16 compatible
    Display: High color (16 bit) or more and 800 x
    480 dots or more
    OS: Microsoft
    ®
    Windows
    ®
    XP Professional/XP
    Home Edition/2000 Professional/Millennium
    Edition/98 Second Edition/98 standard installation
    *3
    (You cannot use this software with Windows
    ®
    95
    or Windows
    ®
    NT.)
    *1 If you do not connect your IC recorder to your computer via
    USB connectors, you need a computer with a “Memory
    Stick” slot or optional “Memory Stick” adaptors as shown
    below to transfer the “Memory Stick” data to your computer:
    PC Card Adaptor for “Memory Stick” (ex. MSAC-PC3)
    Memory Stick Reader/Writer (ex. MSAC-US70)
    Depending on the adaptors, more system requirements may
    be needed. We do not recommend the use of a floppy disk
    adaptor for “Memory Stick”.
    *2 You need the USB connector to connect your IC recorder
    equipped with a USB connector. You also need the
    connector to use the Memory Stick Reader/Writer (ex.
    MSAC-US70).
    *3For usual use of the software in the Windows
    ®
    2000
    Professional, make sure to log on Windows as a user name
    belonging to the “Administrators” or “Power Users”
    account. You cannot use the software with a user name
    belonging to the “Users” account.
    For usual use of the software in the Windows
    ®
    XP
    Professional/Home Edition, make sure to log on Windows
    as a user name belonging to the “Computer administrator”
    user account. You cannot use the software with a user name
    belonging to the “Users” account.
    Notes
    You cannot use the software with a Macintosh machine.
    •A handmade computer, a computer whose operating system
    is installed or upgraded by the user, or a computer with
    multi-boot operating environment are not supported.
    Note on transcribing a message
    When you use Dragon NaturallySpeaking
    ®
    speech-recognition
    software to transcribe a message, your computer must also
    meet the system requirements that the Dragon
    NaturallySpeaking requires. For details, see “Guide for Voice
    Recognition”. You cannot use the transcribing function with
    the ICD-P series.
    Note on sending a voice e-mail
    When you use Microsoft
    ®
    Outlook Express 5.0/5.5/6.0 to send
    a voice e-mail of a message, your computer must also meet the
    system requirements that the Outlook Express requires.
    Program © 1999, 2000, 2001, 2002, 2003, 2004 Sony
    Corporation
    Documentation ©2004 Sony Corporation
    All rights reserved. This manual or the software
    described herein, in whole or in part, may not be
    reproduced, translated or reduced to any machine
    readable form without prior written approval from
    Sony Corporation.
    IN NO EVENT SHALL SONY CORPORATION BE
    LIABLE FOR ANY INCIDENTAL,
    CONSEQUENTIAL OR SPECIAL DAMAGES,
    WHETHER BASED ON TORT, CONTRACT, OR
    OTHERWISE, ARISING OUT OF OR IN
    CONNECTION WITH THIS MANUAL, THE
    SOFTWARE OR OTHER INFORMATION
    CONTAINED HEREIN OR THE USE THEREOF.
    Sony Corporation reserves the right to make any
    modification to this manual or the information
    contained herein at any time without notice.
    The software described herein may also be governed
    by the terms of a separate user license agreement.
    Trademarks
    “Memory Stick” and
    are trademarks of Sony
    Corporation.
    “MagicGate Memory Stick“ and are trademarks
    of Sony Corporation.
    “LPEC”and
    are the trademarks of Sony
    Corporation.
    IBM and PC/AT are registered trademarks of
    International Business Machines Corporation.
    Microsoft, Windows and Outlook are trademarks of
    Microsoft Corporation, registered in the U.S.A. and
    other countries.
    Copyright ©1995 Microsoft Corporation.
    All rights reserved.
    Portion Copyright ©1995 Microsoft Corporation
    Apple and Macintosh are trademarks of Apple
    Computer Inc., registered in the U.S.A. and other
    countries.
    Pentium is a registered trademark of Intel
    Corporation.
    NaturallySpeaking, Dragon Systems are trademarks
    owned by ScanSoft, Inc. and are registered in the
    United States and/or other countries.
    All other trademarks and registered trademarks are
    trademarks or registered trademarks of their
    respective holders. Furthermore, “™” and “
    ®
    ” are
    not mentioned in each case in this manual.
    The “Digital Voice Editor” uses software modules as
    shown below:
    Microsoft
    ®
    DirectX
    ®
    Media Runtime
    ©2001 Microsoft Corporation. All rights reserved.
    Information
    IN NO EVENT SHALL SELLER BE LIABLE FOR
    ANY DIRECT, INCIDENTAL OR
    CONSEQUENTIAL DAMAGES OF ANY NATURE,
    OR LOSSES OR EXPENSES RESULTING FROM
    ANY DEFECTIVE PRODUCT OR THE USE OF ANY
    PRODUCT.
    Notes
    The illustrations in this manual may differ from the actual
    software.
    Explanations in this manual assume that you are familiar
    with basic operations of Windows. For how to use your
    computer and operating system, please refer to the
    respective manuals.
    • The illustrations in this manual is for Sony IC recorders
    ICD-S series, ICD-ST series, ICD-SX series, ICD-MS series,
    ICD-BM series, ICD-BP series, and ICD-P series.
    This manual describes how to connect your Sony IC
    recorder ICD-S series, ICD-ST series, ICD-SX series,
    ICD-MS series, ICD-BM series, ICD-BP series, and
    ICD-P series to your computer, how to install the
    “Digital Voice Editor” software, and the overview of
    the “Digital Voice Editor” software. Before you start,
    read the operating instructions of your IC recorder.
    The “Digital Voice Editor” software allows you to
    transfer the messages to your display monitor, to save
    them on your computer’s hard disk, and to play back
    and edit them.
    Transferring the messages recorded on the IC
    recorder to your computer
    Saving the messages on your computer’s hard disk
    Viewing, playing, or editing the messages on your
    computer
    Transferring messages back to the IC recorder
    Sending a voice e-mail message using MAPI e-mail
    software.
    Using the transcribing keys to play back a message
    and transcribe it using a word-processor or an
    editor's window.
    Transcribing your IC recorder message using
    Dragon NaturallySpeaking
    ®
    speech-recognition
    software (Only when Dragon NaturallySpeaking
    version 5.0 (or higher) Preferred or Professional
    Edition is installed on your computer).
    For details on each operation , refer to the online help
    files.
    Uninstalling the software
    When you wish to uninstall the software, follow the
    steps below.
    1 Click [Start] and select [Programs], [Sony
    Digital Voice Editor 2] and then [Uninstall].
    The uninstaller starts up.
    2 Follow the displayed instructions.
    Note
    If you wish to move the software to another drive or directory
    after it is installed, you need to uninstall the software and then
    reinstall it. The software does not work properly if you just
    move the files.
    1 Tips
    You can also start up the uninstaller by clicking [Start] and
    then selecting [Settings], [Control Panel], and [Add/Remove
    Programs].
    Uninstallation does not remove the message files.
Sony ICD-P28

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le ICD-P28 de la marque Sony ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du ICD-P28 de la marque Sony de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Sony ICD-P28 ici. Ce manuel appartient à la catégorie Enregistreurs audio et a été évalué par 1 personnes avec une moyenne de 7.9. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le ICD-P28 de la marque Sony ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du ICD-P28 de la marque Sony

Généralités
Marque Sony
Modèle ICD-P28
Produit Enregistreur audio
EAN 4901780873722
Langue Anglais
Type de fichier PDF
Audio
Temps d'enregistrement maximal 15.75
Gamme de fréquence 180 - 3500
Autres caractéristiques
Dimensions (LxPxH) 44.5 x 14 x 105.3
Type de batterie AAA
Poids et dimensions
Poids 71
Mémoire
Mémoire interne 32
Écran
Type d'écran LCD
Batterie
Autonomie maximum de la batterie 9
Enregistrement de la durée de vie de la batterie 16

ModesdEmploi.fr

Vous cherchez un manuel ? ModesdEmploi.fr vous permet de trouver le manuel que vous recherchez en un rien de temps. Notre base de données contient plus d'un million de manuels en PDF pour plus de 10 000 marques. Chaque jour, nous ajoutons les derniers manuels afin que vous trouviez toujours le produit que vous recherchez. C'est très simple : entrez le nom de la marque et le type de produit dans la barre de recherche pour consulter gratuitement et immédiatement le manuel de votre choix en ligne.

ModesdEmploi.fr

© Copyright 2020 ModesdEmploi.fr. Tous droits réservés.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site. Si vous continuez à utiliser ce dernier, nous considérerons que vous acceptez l'utilisation des cookies.

En savoir plus