Viking BLK-4 mode d'emploi

Viking BLK-4
(1)
  • N. d. pages: 8
  • Type de fichier: PDF

PRODUCT MANUAL

Designed, Manufactured and Supported in the USA
COMMUNICATION & SECURITY SOLUTIONS
Provide LED Strobe / Beacon
Visual Indication of Line Status
Features
The BLK-4 provides high visibility indication of analog line
status through a high powered 360º LED strobe and/or
beacon visual indicator. The BLK-4 is the ideal solution
for the hearing impaired and can be used equally well in
loud warehouses or factories, where ringing phones can
not be heard. Alternatively, the BLK-4 can be used to add
emergency notification to pre-existing emergency phones
by turning on the strobe light when the emergency phone
is in use.
The included control module has a disable input which is
ideal for two-button emergency phones, such as Viking’s
E-1600-20A, allowing “Info” button calls to be placed with-
out activating the relay (turning on the emergency strobe
light, camera, etc.) Four DIP switches are provided for
turning ring detection on or off, off-hook/loop detection on
or off, 12VDC or dry relay contact output and for selecting
a ring cadence mode which allows the relay to follow ring-
ing or to remain activated during the off time of standard
ring cadence. The control module can be installed on any
standard telephone line or analog PABX/KSU station. The
strobe can be interfaced to flash on ringing, off-hook or a
combination of ringing and off-hook (line in-use).
The BLK-4 is designed for indoor applications. The BLK-
4-EWP is equipped with Enhanced Weather Protection
(EWP) for outdoor installations where the unit is exposed
to precipitation or condensation. For more information,
see DOD# 859.
The kit includes: (1) control module, (1) SL-2/SL-2-EWP
blue LED strobe light, (1) 12V DC power adapter, (16) gel-
filled butt connectors and (1) single gang weatherproof
mounting box with gaskets and hardware.
• BLK-4-EWP’s control module and strobe light come
with Enhanced Weather Protection (EWP), EWP prod-
ucts are designed to meet IP66 Ingress Protection
Rating, see DOD# 859
• Durable polycarbonate lens
• High output long life LED technology
• Four programmable flash patterns:
- Single Flash - Double Flash
- Quad Flash - Flicker Flash
• 6 programmable beacon and strobe brightness set-
tings
• Immune to shock and vibration
• Flush mount or surface mount with weatherproof sin-
gle gang box (included)
• 3/4” knockouts for connecting conduit, etc.
• Strobe and control module may be installed separately
• Can be configured to signal: ringing, off-hook, a com-
bination of both ringing and off-hook (line in-use), or
triggered from a contact closure
• One set of (NO) normally open and (NC) normally
closed relay contacts provided
• Selectable ring cadence mode (strobe light will remain
flashing between rings)
• Switched 12V DC output (follows relay activation for
powering strobe lights, cameras, etc.)
• On/off switches for ring detection and off-hook/loop
detection
• Disable input, ideal for use with two-button emergency
phones like Viking’s E-1600-20A (DOD# 215), will not
activate strobe light on “Info” calls
• Ringing Phone or TTY indication for the hearing impaired
• Ringing phone indication in loud warehouses and factories
• Emergency illumination for emergency phones in elevators,
campuses, hallways, parking ramps, etc.
Alarm indication for security systems or alarm panels with
phone dialers
Power: 120V AC to 12V DC adapter provided
Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft,
2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft
Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6
wires = 300 ft
Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")
Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1"
x 1.0”)
Shipping Weight: 1.5 kg (3.3 lbs)
Operating Temperature: -26° to 54°C (-15° to 130° F)
Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC
Minimum Loop Current: 15 mA
Minimum Ring Voltage: 25V RMS
Ringer Equivalence: 0.5 A REN
Disable/Info Switch Input: 50mA/80mW maximum
Strobe Flash Rate: 60 flashes per minute (default) see Strobe
Flash Patterns page 6
Maximum Strobe Light Output @ 15VDC: Clear lens: 323 lu-
mens, Amber lens: 242 lumens, Blue lens: 116 lumens, Red lens:
66 lumens
Humidity - BLK-4: 5% to 95% non-condensing
Humidity - BLK-4-EWP: up to 100% condensing
Mounting: Fasten to wall, post, etc. with complete surface mount-
ing hardware included
Connections: Color coded wires with gel-filled butt connectors

BLK-4/EWP

Line Status LED Strobe/Beacon Light Kit
September 29, 2014
Applications
Specifications

VIKING

Viking BLK-4

Besoin d’aide?

Nombre de questions : 0

Vous avez une question sur le BLK-4 de la marque Viking ou avez-vous besoin d’aide? Posez votre question ici. Fournissez une description claire et complète du problème et de votre question. Plus votre problème et votre question sont détaillés, plus il sera facile pour les autres propriétaires du BLK-4 de la marque Viking de répondre correctement à votre question.

Consultez gratuitement le manuel de la marque Viking BLK-4 ici. Ce manuel appartient à la catégorie Machines à effets et a été évalué par 1 personnes avec une moyenne de 8.7. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le BLK-4 de la marque Viking ou avez-vous besoin d’aide? Posez votre question ici

Spécifications du BLK-4 de la marque Viking

Généralités
Marque Viking
Modèle BLK-4
Produit Machine à Effet
Langue Anglais
Type de fichier PDF
Design
Couleur du produit Bleu
Lampes
Quantité de lampes 1 lampe(s)
Type de lampe LED
Couleur de la lumière Bleu
Puissance
Source d'alimentation Secteur
Tension d'entrée 12 V
Poids et dimensions
Diamètre de la boule 111 "
Largeur 74 mm
Profondeur 53 mm
Hauteur 25 mm
Poids 1500 g
Caractéristiques
Plage de vitesse de la lumière stroboscopique (nombre de flash par seconde) 1 - 60
voir plus

Foire aux questions

Ci-dessous, vous trouverez les questions les plus fréquemment posées à propos de Viking BLK-4.

Votre question n'est pas dans la liste ? Posez votre question ici