mode d'emploiXit XTNG600

Item # XTNG600

Thank you for your purchase of an XTNG600 multi-power battery pack for use with all Nikon single-lens

reflex digital cameras that Iist the XTNG600 as a compatible accessory in the camera manuaI.The

XTNG600 takes one EN-EL15 recharge-able battery or six AA batteries (alkaline,Ni-MH, or lithium) and

includes an alternate shutter-reIease button, AE-L/AF-L button, multi selector, and main and sub-command

diaIs for taking pictures in “tall” (portrait) orientation. Camera menu options allow the user to choose whether

the camera battery or the batteries in the XTNG600 are used first; see the camera manual for details.

3 Position the XTNG600,keeping the XTNG600 mounting screw (Figure C-2) aligned with the camera tripod

socket (Figure C-1) and tighten the attachment wheel by rotating it in the direction shown by the LOCK

arrow (Figure D). There is no need to remove the battery from the camera before connecting the XTNG600.

At default settings, the battery inserted in the camera will be used only after the battery in the XTNG600

is exhausted. The Battery order option in the camera Custom Settings menu (Group d) can be used to

change the order in which the batteries are used.

■ Removing the Battery Pack

To remove the XTNG600, turn the cam-era off and set the control lock on the XTNG600 to L, then loosen

the attachment wheel and remove the XTNG600. Be sure to replace the contact cover on the cam-era and

the contact Cap on the XTNG600 when the battery pack is not in use.

Be sure to pIace the camera contact cover in the contact cover holder and to keep the XTNG600 contact

cap in a safe pIace to prevent loss.

■ Inserting Batteries

The XTNG600 can be used with one EN-EL15 rechargeable Li-ion battery or with six AA batteries.

Before inserting batteries, be sure that the camera is off and that the XTNG600 control lock is in the L

position.

1 Turn the XTNG600 battery-chamber latch to and remove the battery holder (Figure E).

2 Ready the batteries as described below.

EN-EL15:Matching the indentations on the battery to the projections on the XTNG600 holder, insert the

battery with the arrow (▲) on the battery toward the battery holder power terminals (Figure F-1). Press the

battery lightly downward and slide it in the direction of che arrow until the power terminals click into place

(Figure F-2)．

AA batteries: Place six AA batteries in the XTNG600 battery holder as shown in Figure G, making sure that

the batteries are in the correct orientation.

3 Insert the battery holder in the XTNG600 and latch the battery-chamber cover (Figure Ha).Make sure the

holder is fully inserted before turning the latch.

4 Turn the camera on and check the battery leveI in the control panel or viewfinder. If the camera does not

turn on, check that the battery is correctly inserted.

The EP-5B Power Connector

When using the EP-5B power connector, insert it into the XTNG600 holder with the arrow (▲) on the

connector toward the battery power terminals. Press the connector lightly downward and slide it in the

direction of the arrow until the power terminals click into place (Figure lay).Open the holder power connector

cover and pass the EP-5B power cable through the opening (Figure I-2)．

■ Removing Batteries

Be careful not to drop batteries or the holder.

1 Turn the XTNG600 battery-chamber latch and remove the battery holder (Figure E).

2 Remove the battery or batteries from the holder.

EN-EL15

While pressing the holder PUSH button, slide

the battery towards the button.The battery can

then be removed as shown.

AA Batteries

Remove the batteries as shown. Be careful not

to drop the batteries when removing them from

the holder.

■ Specifications

Power source: One EN-EL15 rechargeable Li-ion battery, six LR6 aIkaline, HR6 Ni-MH, or FR6 lithium AA batteries,

or EH-5b/EH-5a/EH-5 AC adapter (requires EP-5B power connector)

Operating temperature: 0-40℃ (32 – 104℉)

Dimensions (W x Ha x D): Approx. 143×49.5×78 mm

Weight: Approx.350 g ( 12.3 oz) with XTNG600 and optional EN-EL15 battery

Approx. 405 g (14.3 oz) with XTNG600 and six AA batteries(available separately from third-party suppliers)

Approx.290 g (10.2 oz) with XTNG600 and optional EP-5B power connector

Approx.265 g (9.3 oz) with XTNG600

● Specifications and design are subject to change without notice.

The procedure for removing the EP-5B power

connector is the same as that for the EN-EL15.

Thank you for your purchase of an XTNG600 multi-power battery pack for use with all Nikon single-lens

reflex digital cameras that Iist the XTNG600 as a compatible accessory in the camera manuaI.The

XTNG600 takes one EN-EL15 recharge-able battery or six AA batteries (alkaline,Ni-MH, or lithium) and

includes an alternate shutter-reIease button, AE-L/AF-L button, multi selector, and main and sub-command

diaIs for taking pictures in“tall” (portrait) orientation. Camera menu options allow the user to choose whether

the camera battery or the batteries in the XTNG600 are used first; see the camera manual for details.

1) Contact cap 2) Holder for camera contact cover 3) Power/signal contacts 4)AE-L/AF-L button 5)Main

command dial 6) Multi selector 7)Attachment wheel 8)Holder power connector cover 9)Battery-chamber

cover 10) Battery chamber 11) Battery-chamber latch 12) Mounting screw 13) Shutter-release button

14) Control lock 15) Sub-command dial 16) Tripod socket 17) XTNG600 holder for EN-EL15 batteries

18) Power terminaIs 19) Power terminals (XTNG600 battery holder) 20) XTNG600 holder for AA batteries

21 ) Power terminaIs (XTNG600 battery holder).

■ The XTNG600 Shutter-Release Button,Multi Selector,Command Dials,and AE-L/AF-L Button

The XTNG600 is equipped with a shutter-release button (Figure A-13), multi selector (Figure A-6),main

command diaI (Figure A-5), sub-command dial (Figure A-15),and AE-L/AF-L button (Figure A-4) for use

when taking photographs in vertical (“tall,” or portrait) orientation. These controls perform the same functions

as the correspond-ing controls on the camera and are affected by changes to options in the Custom

Settings menu (Group f) that affect these camera controls. See the camera manual for more information.

■ The XTNG600 Control Lock

The control lock (Figure A-14) locks the controls on the

XTNG600 to prevent unin-tended use. Before using these

controls to take photographs in vertical (portrait)

orientation,release the lock as shown at right.

The control lock is not a power switch.Use the camera power

switch to turn the Camera on and off.

■ Parts of the XTNG600 (Figure A)

Pro Series Battery Grip

Nikon

D600

designed for

■ Using the Battery Pack

Attaching the Battery Pack

Before attaching the battery pack, be sure that the camera is off and that the XTNG600 control lock (Figure

A-14) is in the L position (the illustrations show the D600).

1 Remove the contact cap (Figure A-1) from the battery pack.

2 The contacts for the XTNG600 are in the base of the camera, where they are pro-tected by a contact

cover. Remove the contact cover as shown in Figure B-1 and place it in the contact cover holder on the

XTNG600 (Figure B-2).

Mode d'emploi

Consultez gratuitement le manuel de la marque Xit XTNG600 ici. Ce manuel appartient à la catégorie Autres accessoires pour appareils photo et a été évalué par 1 personnes avec une moyenne de 7.8. Ce manuel est disponible dans les langues suivantes: Anglais. Vous avez une question sur le XTNG600 de la marque Xit ou avez-vous besoin d’aide? Posez votre question ici

Besoin d’aide?

Vous avez une question sur le Xit XTNG600 et la réponse n'est pas dans le manuel? Posez votre question ici. Fournissez une description claire et complète du problème, et de votre question. Plus votre problème et votre question sont clairement énoncés, plus les autres propriétaires de Xit XTNG600 ont de chances de vous fournir une bonne réponse.

Nombre de questions : 0

Spécifications du XTNG600 de la marque Xit

Vous trouverez ci-dessous les spécifications du produit et les spécifications du manuel du Xit XTNG600.

Généralités

Marque	Xit
Modèle	XTNG600
Produit	Autres accessoires pour appareil photo
EAN	818795012777, 0818795012777
Langue	Anglais
Type de fichier	Mode d’emploi (PDF)

Caractéristiques

Compatibilité de marque	Nikon
Produits compatibles	D600
Couleur du produit	Noir
Type de produit	Batterie grip pour appareil photo numérique

Contenu de l'emballage

Manuel d'utilisation

Oui

Batterie

Taille de batterie cylindrique	AA
Type de batterie	EN-EL15
Nombre de batteries prises en charge	7

Foire aux questions

Vous ne trouvez pas la réponse à votre question dans le manuel? Vous trouverez peut-être la réponse à votre question dans la FAQ sur le Xit XTNG600 au dessous de.

Votre question n'est pas dans la liste ? Posez votre question ici

Aucun résultat